Two features ran on every shard out of the box, each polling on its own 60s timer for files most shards never generate, neither ever asked for. Fixing that turned into untangling why they shared a config file — and then into the on-loop cost of the three lists behind them.
## Before / after
Measured on the shipped defaults. On-loop numbers are what freezes the world; the tick budget is 8 ms.
| | before | after |
|---|---:|---:|
| Blocklist poll on a shard with no list | every 60s, forever | **none** (opt-in) |
| Manual allowlist poll on a shard with no carve-outs | every 60s, forever | **none** (opt-in) |
| Promote-guard sweep timer | leaked on `Stop()` | stopped, and only started when hits are reported |
| Login allowlist flush, on-loop | O(n) walk + 2 arrays **every 60s**, LOH past ~5,300 entries | reused buffers, **hourly**, zero steady-state allocation |
| Auto-denylist, accept path | 9.1 ns/call | **6.1 ns/call** |
| Auto-denylist, sustained flood at cap (60k rejected) | 26.7 ms | **9.3 ms** |
| Auto-denylist, flood end — **worst single call** | 9.49 ms | **0.05 ms** |
| Auto-denylist cap | 65,536 (stranding 9,895 slots) | **324,449** (exact `HashSet` capacity, ~19 MB) |
The auto-denylist row that matters is the third: the on-loop stall at flood end drops **190×**, because retiring lapsed holds is now the number expiring rather than the number held.
## Why this design
It is built for the shape of attack these shards actually see: **hundreds to a few thousand connections per second**, occasionally tens of thousands, sustained over minutes rather than delivered instantly. Against that shape the cap now covers the whole observed range (50k–250k distinct sources) in memory, and the work of expiring them spreads across the accept calls that were already happening.
There is one case this design is *worse* at than the old one: if every held entry lapses within the same millisecond, retiring them costs ~10.7 ms against the old ~8.9 ms, because the ring's random-access set removals lose to a sequential dictionary scan. Reaching it requires an entire flood to arrive inside one millisecond. **A shard absorbing 324,449 connections in a millisecond is finished at the accept path no matter what this list does** — that is the point where the answer is upstream security and scrubbing (an L4 proxy, edge filtering, a bouncer at the kernel), not a data structure in the game loop. We chose the design that fits the attacks we see and degrades honestly past them, rather than over-engineering for one we do not.
## Blocklist — now opt-in
`BlocklistFilter.Start` only bailed when `_path == null`, which needs `file` to be empty. The default is `"Configuration/ip-blocklist.txt"`, so on any default install both `Task.Run(PollLoop)` and a recurring `SweepGuard` timer started unconditionally, logging *"Blocklist inert: no list at …; polling every 60s"* and then doing exactly that forever.
Adds `"enabled"`, default `false`, using the `_enabled = s.Enabled && <preconditions>` idiom already in `LoginAllowlist` and `AutoDenylist`. **Upgrade is deliberately loud**: a missing key binds to the default, so `LogWhyDisabled()` splits three cases and a shard with a list on disk but no `enabled` key gets a **Warning**, not silence.
## `FileAllowlist` → `ManualAllowlist`, with its own config
Moves to `Configuration/ip-allowlist.json` (`enabled` default `false`, `files`, `reloadInterval`) and into `Network/ManualAllowlist/`, mirroring `Network/LoginAllowlist/`.
It was never a sub-feature of the blocklist. `ManualAllowlist.Contains` has two callers:
| Caller | Could anything else do it? |
|---|---|
| `BlocklistFilter.Evaluate` | **Yes** — the generator already subtracts these files at generation time |
| `BanExemptions.IsExempt` | **No** — sole mechanism for suppressing behavioural ban contributions |
The second reaches `BanChannel.IsExempt` with no blocklist in the path. A shard running **no blocklist** still needs this so the admin's own IP isn't auto-banned by rate-limit detection, so a shared flag couldn't express it — the implication is asymmetric. They still work together via a startup warning when the blocklist is on and the allowlist is not.
On the name: "File" described the storage. The distinction from `LoginAllowlist` is **provenance** — declared by an operator versus earned by authenticating — and "Manual" matches `BanReasons.Manual`. `allowlistFiles` is removed from `BlocklistSettings` outright; blocklists have not shipped long enough for anyone to have set it.
## Login allowlist flush
`Flush()` allocated two arrays sized to the live entry count and copied the whole dictionary into them **on the game loop**, every 60s. `UInt128` is 16 bytes, so past ~5,300 entries that first array was an LOH allocation once a minute, forever. The file write was already off-loop; the walk was not.
Static buffers grown geometrically; the writer owns them until it posts completion back through `Core.LoopContext`, so `_writing`/`_dirty` stay loop state (rule #10). Interval → 1 hour against a 90-day TTL. Clean shutdown writes synchronously via `EventSink.Shutdown`; `HandleClosed` skips `InvokeShutdown` when crashed, so the crash path subscribes separately and only writes when it is actually on the loop thread. Also fixes a pre-existing hole where `_dirty` was cleared *before* the write, so a failed write dropped entries despite the comment promising a retry.
## Auto-denylist: expiry ring
Reclaiming lapsed holds was O(entries held) — every cap-triggered reclaim during a flood walked the whole dictionary to find the few that expired, and `_warnedFull` suppressed the log, not the work.
A hold is **never refreshed** now: the first detection sets the expiry, later ones leave it. That makes insertion order equal to expiry order, so a ring of the same keys is sorted by construction and retiring stops at the first live record. Nothing is lost — the rate limiter runs *ahead* of the connection filters (`NetState.Network.cs`) and reports to the ban channel, so a flooder whose hold lapses is re-held on its next attempt.
Because the ring carries the expiry, the membership side only answers "present?", so it is a `HashSet` — measured at **36 B/slot against the dictionary's 52**. `HashSet` and `Dictionary` share `HashHelpers`, so the from-empty capacity progression is identical (36,353 → 75,431 → 156,437 → 324,449 → 672,827) and the cap still lands on one exactly. The ring is parallel `UInt128[]`/`long[]` rather than an array of structs — `UInt128` forces 16-byte alignment, so a packed pair costs 32 bytes where these cost 24, and the drain reads only the `long[]`.
Rejected after measuring: splitting the drain into a scan loop plus a removal loop (inside noise — both issue N hash removes, and the pointer math was never the bottleneck), and `Dictionary<UInt128,bool>` with tombstoning instead of removal (10% slower *and* unbounded, which breaks the cap).
## Testing
Build clean, 0 warnings. **1,530 tests pass** — 708 UOContent, 822 Server.
Tests were reworked rather than patched: the refresh test inverts to `Repeat_detection_does_not_extend_the_hold`, the obsolete sweep-throttle test is deleted along with the throttle, and four were added for the ring — set/ring parity, release-then-re-hold not being retired by the stale record, exact fill of a non-power-of-two cap, and the moved allowlist config's casing contract. The throttle test added mid-PR was verified to fail without its fix before being deleted.
One commit is comments only (verified: a diff filtered of `//` lines is empty), removing development narration — a `"(Task 2)"` plan reference, `"matching the per-feature JSON config pattern used by X"` across four loaders, a duplicated threading note — and repointing `Firewall` at `dev-docs/ip-bans-and-allowlists.md` instead of a "ban-channel design doc" that does not exist.
Note `Distribution/Configuration/blocklist.json` is gitignored (`.gitignore:14`) and generated from the record defaults on first boot, so the record default *is* the shipped default.
## What
`Dictionary<K,V>.Remove` and `HashSet<T>.Remove` do not bump the collection's version, so removing an entry during a `foreach` does not invalidate the enumerator. A number of loops were still paying for a `PooledRefQueue`/`PooledRefList` to collect keys and drain them in a second pass. This drops those guards.
## Why it's safe
Verified against .NET 10.0.10 rather than taken on trust, since the documented guarantee covers only `Dictionary<TKey,TValue>.Remove` while several of these call sites are `HashSet<T>` or enumerate `.Keys`/`.Values`:
| Case | Result |
|---|---|
| `Dictionary` foreach + `Remove` | safe, all entries visited |
| `Dictionary.Keys` / `.Values` foreach + `Remove` | safe, all entries visited |
| `HashSet` foreach + `Remove` | safe, all entries visited |
| `Dictionary` foreach + `Remove` **then `Add`** | throws `InvalidOperationException` |
Reflection on `_version` confirms the mechanism: neither `Dictionary.Remove` nor `HashSet.Remove` touches it. Because `Remove` never bumps the version, the `Keys` and `Values` enumerators are just as safe as the dictionary's own, even though only `Dictionary.Remove` documents the behaviour. No entries were skipped in any case.
The `HashSet` half is confirmed by [stephentoub on dotnet/dotnet-api-docs#8177](https://github.com/dotnet/dotnet-api-docs/issues/8177#issuecomment-1167251052): *"Both HashSet and Dictionary have been improved to support removal during enumeration. The docs may just benefit from updating."* The gap is in the documentation, not the runtime.
`Remove` followed by `Add` in the same enumeration still throws. That is the line this PR does not cross.
## Guards removed
`VisibilityList`, `ChampionTitleSystem`, `Channel`, `BombingRun`, `Ruleset`, `PuzzleChest`, `RaceChangeGump`, `StepCache`, `PlayerMurderSystem`, `VirtueSystem`, `ProjectedItem`, `StaminaSystem`, `AIGroupMovement`, `PromotedGuard`, `AutoDenylist`, `LoginAllowlist`, `AntiMacroSystem`, `DetectHidden`.
Both collection kinds are covered: `Dictionary` (including loops over `.Keys` and `.Values`) and `HashSet` (`ProjectedItem._active`, `PlayerMurderSystem._contextTerms`, `StaminaSystem._resetHash`). In `StaminaSystem.ResetTimer` the `Count == queue.Count → Clear()` branch goes away with the queue — it only existed to avoid paying for N individual removes.
Where the collection supports it, `Contains` + `Remove` and `TryGetValue` + `Remove` also collapse into a single lookup (`if (list.Remove(x))`, `if (m_Pending.Remove(ns, out var state))`).
`Utility.Tidy<K,V>` keeps its two branches: when `K` is serializable the value is not inspected, otherwise the value is. Only the serializable side may be cast, so `Dictionary<Mobile, int>` and `Dictionary<Mobile, string>` stay valid.
## Deliberately unchanged
**`BaseCreature.LoyaltyTimer.OnTick`** keeps its deferred-delete queue. Removing from `World.Mobiles` while enumerating it is safe, but `Mobile.Delete()` is not a `Remove` — it runs `OnDelete`/`OnAfterDelete`, the `OnParentDeleted` cascade over the creature's pack, `DropHolding()`, and region and guild callbacks. Anything in that surface that constructs a `Mobile` is an `Add` into the dictionary being enumerated, which does invalidate it. `BaseHire.PayTimer.OnTick` has the same shape and is likewise untouched.
**Spatial-query buffers** — `GuardedRegion.CallGuards`, `Thunderstorm`, `Exorcism`, `LeverPuzzleController`, `BaseCreature.TeleportPets` — are a different hazard. They buffer the result of a range query because the drain moves or harms mobiles, which mutates sectors mid-enumeration.
**Re-entrant drains.** The `_users` sets in `Firebomb` and the explosion, conflagration and confusion-blast potions look like this pattern but are not: the loop collects, `Clear()`s, and only then runs `Target.Cancel` on each, which can re-enter. `AnimalTrainer` enumerates `pm.Stabled` and drains through `RemoveStabled`, which nulls the `Stabled` field once it empties — safe for an in-flight enumerator, which holds the set reference rather than the field, but subtle enough not to be worth inlining on a cold path.
## Verification
`dotnet build` clean with 0 warnings; 810 Server and 684 UOContent tests pass.
## Why
The shard owner, on a Starlink CGNAT address, was blocked by the imported reputation blocklist.
The cause was not CrowdSec. The address was a literal line in `ip-blocklist.txt`, so `BlocklistFilter` denied it at accept and then promoted it — and clearing the CrowdSec decision could not fix it either, because the file entry re-reports within `promoteSuppression` of every reconnect attempt.
This is structural, not a one-off. Reputation feeds list shared consumer address space constantly: on CGNAT one public address fronts many subscribers **at the same time**, so a single abusive customer gets the address listed and everyone else behind it is blocked with them. Where leases rotate, a listing says little about whoever holds the address now. Around 1,000 Starlink addresses sit in the current list.
So exemptions go where they cost nothing, and escalation is driven by what a connection actually does.
## Generator — `tools/Export-IpBlocklist.ps1`
`-AllowlistFile` takes multiple paths, subtracted from the merged set before the output is written. Defaults to every `ip-allowlist*.txt` beside the output, merged into one allow set:
- `ip-allowlist.txt` — operator exemptions, created once and **never rewritten**
- `ip-allowlist-<name>.txt` — a carve-out you built, regenerable and copyable between shards
**Subtraction is range-correct.** An allowlisted address inside a blocked CIDR splits that CIDR around the hole rather than being silently ignored. This also fixes `-ExcludeAnonymizers`, which parsed CIDR entries into `$anonCidr` and then only ever subtracted singles.
**No carve-out ships.** A carve-out names a real network, and which ones a shard should exempt depends on where its players actually are — so publishing one would make that policy call for every shard and put a specific provider's address space in the repo. The script builds them on request instead:
```powershell
.\Export-IpBlocklist.ps1 -AddCarveout starlink -Asn 14593
```
Carve-outs are **discovered, not configured**: every `ip-allowlist*.txt` beside the output is subtracted, by the generator and by the shard, so a file an admin adds needs no config edit and no code change. Each carries an `asn=` marker in its header, which is how `-RefreshCarveouts` rebuilds it without the script keeping a list of anyone's networks; a hand-written allowlist has no marker and is never rewritten.
Prefixes come from **announcements, not ownership records**, because registry data disagrees with what is actually routed and silently caps result sets: ARIN whois returns at most 256 rows and gives per-customer /24s, and `206.83.96.0/19` reads as APNIC in RDAP even though `206.83.96/21` is announced by Starlink.
Editing an allowlist bypasses `-MinInterval`, so a just-added exemption isn't indistinguishable from the allowlist not working. A Starlink carve-out, if you build one, costs **~4,300 IPs + ~144 CIDRs of 4.2M (0.10%)**.
## Allowlists
**`FileAllowlist`** reads the same files the generator subtracts, so an operator entry means "leave this address alone" for real. Subtraction alone only covers being *blocked*; behavioural detections never consult the blocklist, so without this a carve-out was quietly routed around — one scanner behind a shared address was enough to get everyone behind it contributed and firewalled, with nothing in the shard's own config explaining why. Reading the files also means an entry applies on the next reload rather than the next regeneration, which is what matters when someone is complaining now.
**`LoginAllowlist`** is earned by authenticating, with a 90-day TTL because an address that logged in years ago is a stranger. Its own store rather than `Account.LoginIPs`, which has no timestamps and cannot be backfilled. An entry is evidence rather than a licence: 10 suppressed contributions in an hour revokes it, and a fresh login forgives the tally.
Both are consulted **only after the blocklist has already matched**, so a normal accept pays nothing for them and the accept gate stays allowlist-free. `BanExemptions` combines them behind `BanChannel.IsExempt` and suppresses escalation only — every local defence still applies.
Two limits, both deliberate and documented in the class: `LoginAllowlist` **cannot bootstrap** (an entry is only earned by getting in, so it never repairs an existing false positive), and it is weakest on rotating CGNAT. That is why `FileAllowlist` is the fix for those, and why it is manual.
## Behavioural detection
| Reason | Trigger |
|---|---|
| `silent-connect` | Reaped after 5s having sent **zero bytes** |
| `invalid-seed` | Opened with a zero seed |
| `foreign-protocol` | Positively identified as HTTP, TLS or SSH |
**`ForeignProtocol` inverts the test.** Asking "is this a good UO client?" cannot work: `LoginEncryption.ClientDecrypt` is a byte-for-byte stream XOR, so a legitimate client with encryption enabled when the shard expects none sends a structurally perfect connection whose payload is noise. "Speaks HTTP" is safe where "unreadable" is not — however misconfigured a UO client is, it never sends `GET / HTTP/1.1`.
Nothing assumes arrival framing. TCP has no message boundaries, so a rule of the form "these bytes must arrive together" is broken by construction and drops real players on poor links. A prefix match with too few bytes to confirm waits for more. A four-byte seed can legitimately spell `GET ` (the address 71.69.84.32) or `0x16 0x03 0x0?` (22.3.x.x), so confirmation requires the request line to continue in printable ASCII or an actual ClientHello inside a plausible record — a real client's fifth byte is a packet id (`0x80`, `0x91`, `0xEF`), none of them printable, so those collisions fall through.
Everything is keyed on **bytes-received rather than elapsed time**. A connection that sent something and ran out of time is far more likely a slow link than an attack, and banning those produces the worst failure mode available: the player retries, trips the rate limiter, and compounds a bad connection into hours of being firewalled off.
## `AutoDenylist`
A short-lived local hold (15m) on behavioural detections, as `IConnectionFilter` + `IBanReporter` over one store so the engine detection sites never reach into content.
This closes the gap where a flood pays for a socket, buffer and `NetState` slot per connection while waiting for the OS bouncer — the verdicts that matter most are reachable only *after* reading bytes — and it is the entire defence on a shard running no bouncer, which is the default config. Not persisted: a holding pen that survives restarts is a ban without a ban's review.
Cost: one dictionary lookup on a usually-empty dict per accept.
## `BanReasons`
Centralises the reason slugs. `IsBehavioral` is an **opt-in** set, not "everything except manual", so a future reason escalates normally instead of silently inheriting an exemption or entering a local denylist.
This caught a real bug during review: the first cut of the exemption swallowed `manual` admin bans (`Commands.cs`, three sites in `AdminGump`) for any allowlisted address.
## Fixes found in review
- **`BanConfiguration.Settings` was null until `Configure()` ran**, while the reap path dereferences it every `Slice()`. A harness driving `NetState.Slice()` directly hit an NRE that presented as flaky because it depended on whether an earlier test had already called `Configure()` — which is why it failed on some CI platforms and not others. Now starts at the record's defaults, with idempotency tracked by a flag; this also removes the same latent NRE from the pre-existing rate-limit path.
- **`-AllowlistFile` was typed `[string]`** while documented and used as a list, so passing two paths would have collapsed them into one string.
## Layout and docs
Content network code moves out of `Misc/` into `UOContent/Network/`, one concern per folder — `AutoDenylist/`, `Blocklist/`, `CrowdSec/`, `Firewall/`, `LoginAllowlist/`, `Packets/`. **Namespaces are untouched**, so these are pure file moves (git tracks all 16 as renames).
`dev-docs/ip-bans-and-allowlists.md` documents the subsystem, leading with the operator process for unblocking a player — including the three things that look sufficient and are not: deleting the CrowdSec decision alone, editing `ip-blocklist.txt` by hand, and `cscli allowlists` alone. `.gitignore` covers the new config files.
## Testing
Build clean. **Server.Tests 810 passed**, **UOContent.Tests 637 passed**, zero warnings. This branch adds 38 tests; the rest of the delta is main's, since this is rebased on current `main`.
New coverage: TTL boundary and renewal, private-address exclusion, manual-ban-never-exempt, unopted-reason-never-exempt, strike revocation, quiet-window reset, login forgiveness, file-allowlist CIDR coverage, file-allowlist not spending the earned list's strikes, denylist expiry-on-read, cap enforcement, lapsed-entry reclaim, HTTP/TLS/SSH identification, seed-collision fall-through, and encrypted-login-is-not-foreign.
Generator verified end-to-end against live feeds: a clean run ships no carve-out, `-AddCarveout starlink -Asn 14593` fetches and collapses 213 prefixes to 115 ranges in 0.1s over 4.2M entries, `-RefreshCarveouts` rediscovers it by its `asn=` marker, a hand-written allowlist is left untouched, and deleting a carve-out drops it rather than having it rewritten. CIDR splitting verified exhaustively: a single-IP hole in a /24 leaves exactly 255 of 256 addresses blocked.
## Operator note
Existing installs are unaffected until the generator next runs, which creates `ip-allowlist.txt` and nothing else. To unblock someone: add the address to that file and delete any live CrowdSec decision — the existing ban outlives the config change. The shard picks the entry up on its next reload, so re-running the generator is optional.
A shard whose players are on CGNAT (satellite, mobile, or an ISP short on IPv4) will likely also want `-AddCarveout`; see `dev-docs/ip-bans-and-allowlists.md`.
## Also included: a latent CI failure this PR surfaced
`fix(tests): serialize test classes that rent through STArrayPool` touches a property-list test file that has nothing to do with this feature. It is here because it was failing macOS CI, and it is trivially cherry-pickable out if you would rather it went to `main` on its own — **which may be the better call, since it is failing `main` today.**
CI has since gone green with it applied.
`STArrayPool` is single-threaded by design and its bucket cache is a plain `static`, not `[ThreadStatic]`, with a check-then-act initialize in `Return()`:
```csharp
var cacheBuckets = _cacheBuckets ?? InitializeBuckets();
```
Two threads both see null, both initialize, and the loser trips `Debug.Assert(_cacheBuckets is null)`. Anything renting from it has to stay off parallel test threads — which is what the `DisableParallelization` collections are for.
- `ObjectPropertyListReentrancyTests` and `ObjectPropertyListNestedBuildTests` (added in #2555) build property lists, which rent the interpolation buffer, but were not in the sequential collection — unlike `PropertyListInvalidationDuringBuildTests` in the same file. This is a **latent failure already on `main`**; it is timing-dependent, so it shows on some platforms and not others.
- `AutoDenylistTests` (added here) has the same exposure: its cap tests reach `AutoDenylist.Sweep`, which rents a `PooledRefList` without `mt`. The blocklist tests need no marking because `BlocklistSnapshot.Build` asks for the `mt` pool explicitly.
No production change — `STArrayPool` is the right pool on the game loop, where both `Sweep` and the property list actually run.
## Deliberately not included
Waiting for a fragmented four-byte seed at `AwaitingSeed`. It looked like a bug but the disconnect is a deliberate defence: only pre-0xEF clients reach it (0xEF goes through `HandlePacket`, which already waits for its 21 bytes), and waiting converts an instant drop into a full 5s slot hold for a client sending one or two bytes, or a loris dribbling a byte every few seconds. Against a fixed 4096-entry `MaxConnections` table that trades capacity that matters for a fragmentation case a reconnect already fixes.
Kamron Batman