## What
- Bind the login auth id to the account **and** origin address that earned it, make it a CSPRNG draw, expire it after two minutes, and spend it only once its owner presents it.
- Skip the password verify on `GameLogin` (0x91) when the presented id vouches for the submitted username and address.
## Why
A full client login hashes the password twice — `AccountLogin` (0x80) and then `GameLogin` (0x91). At the current Argon2 parameters that is **most of a 16 ms frame each, on the single-threaded game loop**, for every login attempt.
The second verify is redundant. `GameLogin` already requires an id from `_authIDWindow`, and that window is only populated by `GenerateAuthID`, called from `PlayServer` — reachable only after 0x80 has already authenticated the account **in this same process**. ModernUO Gateway has its own auth-id passing mechanism and is out of scope here.
## Why the id needed hardening first
Skipping the verify promotes the id from a correlation token to a bearer token, and it was not one:
- drawn from `Utility.Random` → `BuiltInRng`, a non-cryptographic PRNG
- bound to nothing — `AuthIDPersistence` carried only `Age` and `Version`
- never expiring; `Age` was only read to pick an eviction victim
A guessed id got you nothing while the password was still checked. Without that check it would have been an account takeover, so the id is now a CSPRNG draw, single-use, two-minute TTL, and bound to both the account and the origin address.
What remains is observing a live id on the client's network or machine — which the server cannot defend against under any design, and which already yields the password itself, since the client transmits it in the same handshake.
Network switching mid-login is deliberately unsupported.
## Behaviour
A full verify was always required before this change, and ids never expired, so every "before" is a password check.
| Case | Before | After |
|---|---|---|
| Id absent | Disconnect | Disconnect |
| Address mismatch | Verify | **Disconnect** |
| Account mismatch | Verify | **Disconnect** |
| Expired | Verify | **Verify** |
| Id vouches | Verify | **Skip** |
No case grants access the previous code would have denied. Expiry deliberately falls back to the verify rather than disconnecting — a player can idle, and turning that into a lockout would be a regression for no gain.
## Look, then take
An id is not consumed until the presenter has shown it is theirs. Removing it first would let anyone who lands on a live id burn it, and its owner would arrive to `"Unable to find auth id."` and have to log in again over a packet they had no part in.
The **address is compared before the account**, so a guesser from anywhere else is rejected before a username is ever looked at. That is what makes it safe to leave the id in place on a mismatch: there is no username-enumeration risk to trade against, and the only presenter who could enumerate is already on the victim's own address.
## The window is not a cap
It was 128 entries with the oldest evicted to make room. That is a cap on *concurrent logins*, not a resource bound: 800 people picking a server at once would have live ids discarded and those clients would arrive to `"Unable to find auth id."` — a failed login caused by nothing except other people logging in.
Issuing now sweeps expired entries and lets the window grow if everything in it is still live. Unbounded is safe here: an entry costs a **successful** password verify to create and dies after two minutes, so its size tracks logins genuinely in flight.
Removing an id when its connection drops is not an option, and this was checked rather than assumed — `NetState.cs:787` disconnects the login connection *deliberately*, immediately after the id is issued, and that disconnect is never cancelled. Surviving it is the whole purpose of the id. Expiry is the only correct reclamation.
## Handshake hardening
Choosing a server queues a disconnect, but the queue drains on the *next* slice, so a client pipelining into the same recv buffer can reach the handshake handlers again. Two had no do-once guard:
- `LoginServerSeed` (0xEF) now rejects when `state.Seeded` is already set.
- `PlayServer` (0xA0) now rejects when `state.AuthId != 0` — otherwise a connection that had already spent its id would be handed the spent one back.
Issuing is also idempotent (`EnsureAuthId`), so a connection holds exactly one id by construction and an orphan is impossible rather than something to clean up. The login state machine itself is untouched.
Also fixes a fall-through: the "Unable to find auth id" branch disconnected without returning, then continued with a default entry and nulled `state.Version`.
## Testing
`ConsumeAuthId` is a seam with no `NetState` dependency, so the auth decision is tested directly: vouching, account mismatch, address mismatch, case-insensitive usernames, IPv4-mapped-IPv6, unknown ids, single-use by the owner, **a rejected attempt leaving the id redeemable**, expiry-into-verify, and an 800-id login rush that must evict nobody. Expiry is driven by moving `Core._now`, not by waiting. Every new clause was verified to discriminate by removing it and confirming only its own tests fail.
## Cost
Halves the per-login game-loop cost. This does not make hashing cheaper or move it off the loop — that is gated on a measurement described in `docs/handoffs/2026-08-07-off-loop-argon2-hashing.md`.
> ⚠️ **Rollback hazard — one-way door once logins are taken.** Serialization is unchanged, so a save
> written by this build still *loads* on the previous one. Its contents do not survive the trip: on
> its first successful login each account is rehashed to `$argon2id$`, and the previous build ships
> Argon2.Bindings 1.19.0, whose `Verify` is gated by the verifier's own configured type and answers
> `false` for an `$argon2id$` hash. **After a shard running this build has accepted logins, do not
> roll back past this commit** — every account that logged in is locked out on the older binary, and
> the only recovery is rolling forward again or resetting passwords by hand. Roll back only from a
> save taken before the first post-deploy login.
Requires [Argon2.Bindings 1.20.0](https://github.com/modernuo/Argon2.Bindings/pull/14), now published.
## What
- Consume `Argon2.Bindings` 1.20.0, which resolves the Argon2 type from the stored PHC string rather than from the verifier's own configuration.
- Default to **Argon2id, m=16384, t=1, p=1** — 8.51 ms against the old Argon2i 8 MiB t=3 at 10.11 ms. Cheaper *and* stronger.
- Rehash on a successful login whenever the stored parameters are stale, not only when the algorithm changes.
- Fix `SetPassword`, which derived the password phrase from the outgoing algorithm while storing it under the incoming one.
## Why
**Verification was gated by the verifier's configured type.** `Verify` passed the instance's own `ArgonType` to native `argon2_verify`, whose `decode_string` rejects a disagreeing `$argon2i$`/`$argon2id$` prefix and returns `DECODING_FAIL` — folded into `false`, the same answer as a wrong password. Switching the default type would have locked out every existing account, and `VerifyAndUpdate` could not have migrated them either: it delegates to the same type-fixed `Verify` and never compared `ArgonType`. Fixed upstream in 1.20.0. The pinned legacy-`$argon2i$` test here fails on 1.19.0 for exactly that reason, which is what makes the package bump load-bearing rather than incidental.
**Changing the defaults would otherwise have reached nobody.** Argon2's PHC string embeds `m`, `t` and `p`, so verification uses the parameters stored with each account, not the configured ones — and verification is the hot path. `CheckPassword` only rehashed when the *algorithm* changed, never when its cost parameters did, so on an established shard the new defaults would have applied to new accounts only. `IPasswordProtection.NeedsRehash` closes that: it defaults to `false`, so PBKDF2 and the `HashAlgorithm` protections are untouched — only Argon2 carries its cost inside the stored value.
**`SetPassword` picked the phrase rule from the wrong algorithm.** SHA1 and SHA2 salt the phrase with the username; Argon2 and PBKDF2 do not. It chose the rule from the *outgoing* algorithm while storing under the *incoming* one, so any algorithm change wrote a credential its own next verify could not reproduce. It now assigns `PasswordAlgorithm` first and derives the phrase from that. Note this ordering is load-bearing and invisible — `UpgradingAlgorithm_DoesNotLockTheAccountOut` is what pins it.
## Cost
Verification is re-derivation, so these are login numbers. A full login calls `CheckPassword` twice — `AccountLogin` (0x80) then `GameLogin` (0x91): **~20 ms before, ~17 ms after**, plus a one-time ~8.5 ms rehash on each account's migrating login.
That cost is still paid on the game loop. Moving hashing off-loop is deliberately **not** in this PR — it needs a pending-auth state in the login handlers, bounding of in-flight hashes, and login rate limiting.
### Summary
.NET 8 supports Xoroshiro 256** off the shelf and added Shuffle. Switching to that implementation.
### Developer Notes
* Removed many convenience methods that weren't used.
**Only one functional change**
* Fixes a bug in LogFactory where `Warning` is being logged as `Information`
Non-functional changes:
* Updates/Fixes copyright headers
* Removes namespace scopes for core files.
View with [whitespace off](https://github.com/modernuo/ModernUO/pull/1187/files?w=1).
