## Summary
About 114 tests skipped on CI because they needed the official client files (`tiledata.mul`, map and multi files). They gave CI no signal, and locally they ran against whichever client a developer had installed. The test hosts now build their own world instead, so every test runs on CI and runs the same on every machine. CI simulation: Server.Tests 837 passed, UOContent.Tests 1131 passed, **0 skipped**.
- **Generated tile data.** The fixtures write a pre-HS `tiledata.mul` from a small invented tile kit (`Server.Tests/Terrain/TestTiles`) and load it through the real `TileData.Load()`. The test hosts no longer read any client directory (`MODERNUO_CLIENT_PATH`, `MODERNUO_TEST_DATA_DIR` and `C:\Ultima Online Classic` are gone from test code). The file is written to `SyntheticData` in each test project's output, overwritten every run and removed by `dotnet clean`.
- **Injected terrain.** `TestTerrain` stamps land and statics into Felucca and Trammel, which share one terrain. Writes after startup must go in a `TestTerrain.Scope()`, which puts back every block it touched and keeps the step cache fresh.
- **Prefab scenes.** Seven named scenes (town, causeway, sewer walkway, coastline, deep sea, map-edge sea, an upstairs room with an L-shaped counter) replace the Britain coordinates the pathing, AI and fishing tests relied on. Each scene-based test asserts its scene is present first, so a missing scene fails instead of passing on flat ground. Stamping all seven takes 3-5 ms.
- **Multi footprints.** Contrived footprints for the three multi IDs content looks up (0x74, 0x7A, 0x0) are seeded through a new internal `MultiData.SetComponents`.
- **Fingerprint.** `StepCacheFile.HashTileDataFile` is extracted so a test can show that a one-flag change to the file changes the fingerprint, while runtime table mutation does not.
### Engine changes
- `TileMatrix.GetLandBlock`/`GetStaticBlock`: on a map without its files, return the block injected with `SetLandBlock`/`SetStaticBlock`, or the default when nothing was injected. Maps with files take the same path as before.
- `MultiData.SetComponents` (internal): registers a footprint without multi files.
### Test changes worth a look
- Values that were properties of real Britain terrain (probes at Z 10, a pinned plain walk mask of 0xC1) are re-pinned to the synthetic plain (Z 0, 0xFF).
- No tests were deleted. The multi walkability and boat-deck tests assert movement behaviour over a footprint, not what a real multi looks like, so they run on the contrived footprints.
- Maps 0 and 1 keep file indexes 0 and 1, and every stamp writes both, rather than sharing one file index. On a map without files the getters never consult the shared-file cache, and its patch bits would hide one facet's injection from the other.
## Test plan
- [x] `dotnet test -p:SolutionDir=... --filter "Category!=Manual"` with the client env vars pointed at an empty directory: 837 + 1131 passed, 0 skipped, 0 failed
- [x] Mutation check: removing the step-cache clear from `TestTerrain` makes the stale-cache tests fail
- [x] CI green on all platforms
## Summary
`BaseCreature` stored the pet owner (`ControlMaster`) and the summoner (`SummonMaster`) in two fields. Every flow that manages pets kept them in step by hand: summon, transfer, stable, claim, ball of summoning and GM obey. They now share one `_master` field, and the two properties read it through the Controlled and Summoned flags:
```csharp
ControlMaster => Controlled ? master : null
SummonMaster => Controlled && !Summoned ? null : master
```
Every existing reader keeps its meaning:
- `ControlMaster` is still "the owner".
- `SummonMaster` is still "the summoner, controlled or not".
Blade spirits, energy vortexes, clones, undead minions and enraged creatures (a summon master without `Summoned`) never become visible through `ControlMaster`, so the ungated readers (ML notoriety, aggressor entries and similar) behave as before.
- Setting `SummonMaster` on a plain pet does nothing, instead of quietly replacing the owner.
- `SetControlMaster` now keeps both masters in step, so the hand-written `SummonMaster` copies are removed from ball of summoning, GM obey, pet transfer, auto-stable and claim, the animal trainer's stable and claim, and jail stabling.
## Serialization
BaseCreature moves to v24 with one serialized master (slot 15); the old `SummonMaster` slot is dropped.
- `MigrateFrom(V23Content)` resolves absent fields through the same default-value methods the live reader uses.
- A save that carried both masters (a summon traded before ownership followed transfers) resolves to the owner. Legacy pre-codegen streams follow the same rule.
Requires `ModernUO.Serialization.Generator` 4.2.0 (#2671). `UOContent.Tests` was still on 4.1.0 and is bumped to match.
## Test plan
- [x] `MasterShapes_RoundTrip`: controlled pet, controlled summon, energy vortex, enraged creature
- [x] `SummonMaster_OnPlainPet_KeepsTheOwner`: owner and follower counts unchanged
- [x] `LegacyV22Stream_DifferingMasters_OwnerWins`
- [x] `V23Stream_MigratesToOneMaster_AndDefaultsAbsentFields`: both master slots -> owner; flags past bit 32; absent fields take class defaults
- [x] UOContent.Tests (1168 passed, 2 skipped) and Server.Tests (907) green
## Summary
- `AnchoredItemSerializationTests.LastMovedAndDecayReset_RoundTripExactly` never deleted its deserialized copy. `Item.Deserialize` enters the item into its map's sectors, so the copy stayed live on Felucca at (121,100). `ItemEnumerator_FiltersByBoundsAndOrder`, `ItemByDistanceEnumerator_Bounds_FindsItemsInBounds` and `ItemByDistanceEnumerator_Bounds_MakeBoundsInclusive` scan that area and found an extra item whenever the serialization test ran before them, so they failed depending on test order. The copy is now deleted in a `finally`.
- Bump MailKit 4.17.0 → 4.18.0 and Microsoft.NET.Test.Sdk 18.10.0 → 18.10.1.
## Test plan
- [x] Probe test: a deserialized copy shows up in `GetItemsInBounds` (reproduced), and after the fix the area is empty
- [x] Server.Tests: 907/907 pass
- [x] UOContent.Tests: 1126 pass, 2 skipped
- [x] Solution builds with 0 errors
## Summary
Moves spawner entry storage out of the abstract `BaseSpawner` into the concrete owner, so a spawner subclass can store its own entry type while every stock code path keeps working. Motivation: an out-of-tree spawner (ModernSpawner) needs `ModernSpawnerEntry : SpawnerEntry` with extra fields; today `BaseSpawner` owns `List<SpawnerEntry>` and a family of non-virtual members, and the serialization generator constructs list elements from the declared element type, so storage has to live in the class that declares the concrete list.
### What changed
- **`BaseSpawner` v13** no longer owns `_entries`. It reads entries through an abstract view and mutates them through an owner contract (`BaseSpawner.Entries.cs`):
`Entries` (`IReadOnlyList<SpawnerEntry>`, `[IgnoreDupe]`), `EntrySpan` (`ReadOnlySpan<SpawnerEntry>` for hot loops), `CreateEntry`, `AddEntryCore`, `RemoveEntryCore`, `ClearEntriesCore`, `AdoptEntries`, `CloneEntry`, `TransferSpawned`, plus public `RemoveAllEntries()`, `CopyEntriesTo(target)` and protected `RebuildSpawned()`. Every loop inside `BaseSpawner` is an indexed `for` over `EntrySpan`.
- **`Spawner` v2** owns `[SerializedIgnoreDupe] List<SpawnerEntry> _entryList` (generated `EntryList`, protected). `ProximitySpawner`/`RegionSpawner` inherit it unchanged. The `Spawned` rebuild and timer re-arm moved from the base `[AfterDeserialization]` (which runs before derived fields are read) into `Spawner`'s.
- **Save migration**: `MigrateFrom(V12Content)` (and the v10/v11/legacy readers) hand the old list to the owner via `AdoptEntries`; `Spawner.MigrateFrom(V1Content)` restores its own fields and leaves the adopted list alone. Three v12/v1/v0 save blobs captured before the change are committed as fixtures and loaded by tests.
- **Lifecycle hooks** (`BaseSpawner.Hooks.cs`, all no-op by default): `OnStarted`, `OnStopped`, `OnBeforeSpawn(entry)` veto, `OnConfigureSpawned(entry, spawned)` before positioning, entry-aware `GetSpawnPosition(entry, spawned, map)`, `OnSpawned(entry, spawned)`, `OnSpawnedDeath(entry, spawned, killer)`. `BaseCreature.OnDeath` calls `NotifySpawnedDeath` before base death (which deletes the mobile and unlinks the spawner). `Start()` and the `NextSpawn` setter share one start core so `OnStarted` fires on both.
- **`SpawnerEntry` v2**: per-entry `Disabled` (XmlSpawner's entry "lock"), stored inverted so the common case writes nothing in binary or JSON; skipped by weighted selection, live spawns untouched; toggle button per row in `SpawnerGump`. `SetParent` is public and `Parent` is protected so an out-of-tree entry subclass can adopt and dirty-track.
- **DTO**: `SpawnerDto` loses `Entries`; each concrete record declares its own `entries` at the same JSON order, so `Distribution/Data/Spawns/**` is byte-identical. Import adopts the deserialized entry objects instead of recreating them through `AddEntry`, which is what preserves subtype fields (and `disabled`).
### Breaking changes and behaviour changes
- **API:** `BaseSpawner.Entries` is `IReadOnlyList<SpawnerEntry>` instead of `List<SpawnerEntry>`. The generated `AddToEntries`/`RemoveFromEntries`/`InsertIntoEntries`/`RemoveFromEntriesAt`/`ClearEntries` helpers on `BaseSpawner` are gone; use `AddEntry`/`RemoveEntry`/`RemoveAllEntries`/`CopyEntriesTo`. `RemoveAllEntries()` deletes the entries' live spawns as well as the entries (the old generated `ClearEntries()` only cleared the list), which is why it has a new name rather than the old one.
- `SpawnerControllerGump` "copy entries" now goes through `CopyEntriesTo`, which deletes the target's live spawns (previously it cleared the list and left the spawns orphaned) and is a no-op when source == target (previously that wiped the source).
- `RemoveEntry` with an entry the spawner does not own is now a no-op (previously it deleted that entry's spawns).
- `Respawn()` honours `Disabled` because it calls `Spawn()`; `Spawn(int index)`, `RemoveSpawn`, and `RemoveSpawns` ignore it.
- Copying entries between spawners no longer forces a 1-second first spawn; the target re-arms on its normal delay.
- Subclasses that own a different entry list than `Spawner`'s must call `RebuildSpawned()` from their own `[AfterDeserialization]` (`Spawner`'s call runs before their list is read) and, when converting adopted entries into their own type, carry live spawns across with `TransferSpawned`. The in-repo test subclass demonstrates both.
### Performance
Manual harness (`Benchmark_SpawnPath_Manual`, skipped by default): 100k calls, entries all full so `Spawn()` does selection only.
| Path | Before (4bad0cc9e) | After |
|---|---|---|
| `Spawn()` 1 entry | 48.7 ns | 53.2 ns (within run-to-run noise) |
| `Spawn()` 10 entries | 243.7 ns | 153.1 ns |
| `Spawn()` 50 entries | 1077.6 ns | 645.1 ns |
| `Remove()` 10 entries | 139.6 ns | 83.6 ns |
Hooks are no-ops for stock spawners; `OnMovement` is untouched.
### Tests
- `SpawnerEntryOwnershipTests` (add/remove/clear, start after stop, dupe, copy, self-copy, foreign-entry removal, Disabled binary/JSON)
- `SpawnerHookTests` (hook order for mobiles and items, veto, death notification, `NextSpawn` start, a subclass with its own `List<TestEntry>` round-tripping and duping)
- `SpawnerSaveMigrationTests` (v12 fixtures through `Spawner`, `ProximitySpawner`, `RegionSpawner`; new-format byte-identical round trip with a live spawn reference)
- `SpawnerDtoEntryTests` (compact JSON position of `entries`, `disabled` only when set, import adopts the deserialized objects)
- Existing DTO/JSON/spawn-data tests unchanged. UOContent.Tests 801 passed, Server.Tests 869 passed. Migration schemas regenerated (`BaseSpawner.v13`, `Spawner.v2`, `SpawnerEntry.v2`).
Coverage caveats, stated plainly: v10, v11 and the pre-codegen legacy reader could not be captured as fixtures by the current code; each changed only `_entries = …` → `AdoptEntries(…)` into the same sink the v12 fixtures exercise, and is covered by review. The captured v12 fixtures carry no live spawns, so re-linking live `ISpawnable` references is proven by the new-format round trip, not by a legacy blob. The `SpawnerGump` toggle layout could not be checked in a client; the delete button moved from x=38 to x=46 to make room.
### Summary
* Upgrades Serialization Generator to v3. This contains numerous bug fixes and a significant performance improvement.
* Bumps other dependencies.
### Summary
* Bumps to .NET 9 with updated dependencies
* Comparing a value type against null is no longer allowed
* CI/CD now uses the version specified in global.json
* Serialization generator updated to .NET 9 with bug fixes, fixes to turkish language, and parallelization
> [!Note]
> **Developer Note**
> Now developers will only need to build/run the Application project instead of everything.
> When adding new projects, make sure to:
> 1. Add a reference to that project in the Application project.
> 2. Add the dll file to the Distribution/Data/assemblies.json file
### Summary
- Adds an application project
- Consolidates process restarts to use `Core.Kill(true)`
- Removes some old messaging, for example processor optimization
- Fixes missing build cleanup
