## Why
The shard owner, on a Starlink CGNAT address, was blocked by the imported reputation blocklist.
The cause was not CrowdSec. The address was a literal line in `ip-blocklist.txt`, so `BlocklistFilter` denied it at accept and then promoted it — and clearing the CrowdSec decision could not fix it either, because the file entry re-reports within `promoteSuppression` of every reconnect attempt.
This is structural, not a one-off. Reputation feeds list shared consumer address space constantly: on CGNAT one public address fronts many subscribers **at the same time**, so a single abusive customer gets the address listed and everyone else behind it is blocked with them. Where leases rotate, a listing says little about whoever holds the address now. Around 1,000 Starlink addresses sit in the current list.
So exemptions go where they cost nothing, and escalation is driven by what a connection actually does.
## Generator — `tools/Export-IpBlocklist.ps1`
`-AllowlistFile` takes multiple paths, subtracted from the merged set before the output is written. Defaults to every `ip-allowlist*.txt` beside the output, merged into one allow set:
- `ip-allowlist.txt` — operator exemptions, created once and **never rewritten**
- `ip-allowlist-<name>.txt` — a carve-out you built, regenerable and copyable between shards
**Subtraction is range-correct.** An allowlisted address inside a blocked CIDR splits that CIDR around the hole rather than being silently ignored. This also fixes `-ExcludeAnonymizers`, which parsed CIDR entries into `$anonCidr` and then only ever subtracted singles.
**No carve-out ships.** A carve-out names a real network, and which ones a shard should exempt depends on where its players actually are — so publishing one would make that policy call for every shard and put a specific provider's address space in the repo. The script builds them on request instead:
```powershell
.\Export-IpBlocklist.ps1 -AddCarveout starlink -Asn 14593
```
Carve-outs are **discovered, not configured**: every `ip-allowlist*.txt` beside the output is subtracted, by the generator and by the shard, so a file an admin adds needs no config edit and no code change. Each carries an `asn=` marker in its header, which is how `-RefreshCarveouts` rebuilds it without the script keeping a list of anyone's networks; a hand-written allowlist has no marker and is never rewritten.
Prefixes come from **announcements, not ownership records**, because registry data disagrees with what is actually routed and silently caps result sets: ARIN whois returns at most 256 rows and gives per-customer /24s, and `206.83.96.0/19` reads as APNIC in RDAP even though `206.83.96/21` is announced by Starlink.
Editing an allowlist bypasses `-MinInterval`, so a just-added exemption isn't indistinguishable from the allowlist not working. A Starlink carve-out, if you build one, costs **~4,300 IPs + ~144 CIDRs of 4.2M (0.10%)**.
## Allowlists
**`FileAllowlist`** reads the same files the generator subtracts, so an operator entry means "leave this address alone" for real. Subtraction alone only covers being *blocked*; behavioural detections never consult the blocklist, so without this a carve-out was quietly routed around — one scanner behind a shared address was enough to get everyone behind it contributed and firewalled, with nothing in the shard's own config explaining why. Reading the files also means an entry applies on the next reload rather than the next regeneration, which is what matters when someone is complaining now.
**`LoginAllowlist`** is earned by authenticating, with a 90-day TTL because an address that logged in years ago is a stranger. Its own store rather than `Account.LoginIPs`, which has no timestamps and cannot be backfilled. An entry is evidence rather than a licence: 10 suppressed contributions in an hour revokes it, and a fresh login forgives the tally.
Both are consulted **only after the blocklist has already matched**, so a normal accept pays nothing for them and the accept gate stays allowlist-free. `BanExemptions` combines them behind `BanChannel.IsExempt` and suppresses escalation only — every local defence still applies.
Two limits, both deliberate and documented in the class: `LoginAllowlist` **cannot bootstrap** (an entry is only earned by getting in, so it never repairs an existing false positive), and it is weakest on rotating CGNAT. That is why `FileAllowlist` is the fix for those, and why it is manual.
## Behavioural detection
| Reason | Trigger |
|---|---|
| `silent-connect` | Reaped after 5s having sent **zero bytes** |
| `invalid-seed` | Opened with a zero seed |
| `foreign-protocol` | Positively identified as HTTP, TLS or SSH |
**`ForeignProtocol` inverts the test.** Asking "is this a good UO client?" cannot work: `LoginEncryption.ClientDecrypt` is a byte-for-byte stream XOR, so a legitimate client with encryption enabled when the shard expects none sends a structurally perfect connection whose payload is noise. "Speaks HTTP" is safe where "unreadable" is not — however misconfigured a UO client is, it never sends `GET / HTTP/1.1`.
Nothing assumes arrival framing. TCP has no message boundaries, so a rule of the form "these bytes must arrive together" is broken by construction and drops real players on poor links. A prefix match with too few bytes to confirm waits for more. A four-byte seed can legitimately spell `GET ` (the address 71.69.84.32) or `0x16 0x03 0x0?` (22.3.x.x), so confirmation requires the request line to continue in printable ASCII or an actual ClientHello inside a plausible record — a real client's fifth byte is a packet id (`0x80`, `0x91`, `0xEF`), none of them printable, so those collisions fall through.
Everything is keyed on **bytes-received rather than elapsed time**. A connection that sent something and ran out of time is far more likely a slow link than an attack, and banning those produces the worst failure mode available: the player retries, trips the rate limiter, and compounds a bad connection into hours of being firewalled off.
## `AutoDenylist`
A short-lived local hold (15m) on behavioural detections, as `IConnectionFilter` + `IBanReporter` over one store so the engine detection sites never reach into content.
This closes the gap where a flood pays for a socket, buffer and `NetState` slot per connection while waiting for the OS bouncer — the verdicts that matter most are reachable only *after* reading bytes — and it is the entire defence on a shard running no bouncer, which is the default config. Not persisted: a holding pen that survives restarts is a ban without a ban's review.
Cost: one dictionary lookup on a usually-empty dict per accept.
## `BanReasons`
Centralises the reason slugs. `IsBehavioral` is an **opt-in** set, not "everything except manual", so a future reason escalates normally instead of silently inheriting an exemption or entering a local denylist.
This caught a real bug during review: the first cut of the exemption swallowed `manual` admin bans (`Commands.cs`, three sites in `AdminGump`) for any allowlisted address.
## Fixes found in review
- **`BanConfiguration.Settings` was null until `Configure()` ran**, while the reap path dereferences it every `Slice()`. A harness driving `NetState.Slice()` directly hit an NRE that presented as flaky because it depended on whether an earlier test had already called `Configure()` — which is why it failed on some CI platforms and not others. Now starts at the record's defaults, with idempotency tracked by a flag; this also removes the same latent NRE from the pre-existing rate-limit path.
- **`-AllowlistFile` was typed `[string]`** while documented and used as a list, so passing two paths would have collapsed them into one string.
## Layout and docs
Content network code moves out of `Misc/` into `UOContent/Network/`, one concern per folder — `AutoDenylist/`, `Blocklist/`, `CrowdSec/`, `Firewall/`, `LoginAllowlist/`, `Packets/`. **Namespaces are untouched**, so these are pure file moves (git tracks all 16 as renames).
`dev-docs/ip-bans-and-allowlists.md` documents the subsystem, leading with the operator process for unblocking a player — including the three things that look sufficient and are not: deleting the CrowdSec decision alone, editing `ip-blocklist.txt` by hand, and `cscli allowlists` alone. `.gitignore` covers the new config files.
## Testing
Build clean. **Server.Tests 810 passed**, **UOContent.Tests 637 passed**, zero warnings. This branch adds 38 tests; the rest of the delta is main's, since this is rebased on current `main`.
New coverage: TTL boundary and renewal, private-address exclusion, manual-ban-never-exempt, unopted-reason-never-exempt, strike revocation, quiet-window reset, login forgiveness, file-allowlist CIDR coverage, file-allowlist not spending the earned list's strikes, denylist expiry-on-read, cap enforcement, lapsed-entry reclaim, HTTP/TLS/SSH identification, seed-collision fall-through, and encrypted-login-is-not-foreign.
Generator verified end-to-end against live feeds: a clean run ships no carve-out, `-AddCarveout starlink -Asn 14593` fetches and collapses 213 prefixes to 115 ranges in 0.1s over 4.2M entries, `-RefreshCarveouts` rediscovers it by its `asn=` marker, a hand-written allowlist is left untouched, and deleting a carve-out drops it rather than having it rewritten. CIDR splitting verified exhaustively: a single-IP hole in a /24 leaves exactly 255 of 256 addresses blocked.
## Operator note
Existing installs are unaffected until the generator next runs, which creates `ip-allowlist.txt` and nothing else. To unblock someone: add the address to that file and delete any live CrowdSec decision — the existing ban outlives the config change. The shard picks the entry up on its next reload, so re-running the generator is optional.
A shard whose players are on CGNAT (satellite, mobile, or an ISP short on IPv4) will likely also want `-AddCarveout`; see `dev-docs/ip-bans-and-allowlists.md`.
## Also included: a latent CI failure this PR surfaced
`fix(tests): serialize test classes that rent through STArrayPool` touches a property-list test file that has nothing to do with this feature. It is here because it was failing macOS CI, and it is trivially cherry-pickable out if you would rather it went to `main` on its own — **which may be the better call, since it is failing `main` today.**
CI has since gone green with it applied.
`STArrayPool` is single-threaded by design and its bucket cache is a plain `static`, not `[ThreadStatic]`, with a check-then-act initialize in `Return()`:
```csharp
var cacheBuckets = _cacheBuckets ?? InitializeBuckets();
```
Two threads both see null, both initialize, and the loser trips `Debug.Assert(_cacheBuckets is null)`. Anything renting from it has to stay off parallel test threads — which is what the `DisableParallelization` collections are for.
- `ObjectPropertyListReentrancyTests` and `ObjectPropertyListNestedBuildTests` (added in #2555) build property lists, which rent the interpolation buffer, but were not in the sequential collection — unlike `PropertyListInvalidationDuringBuildTests` in the same file. This is a **latent failure already on `main`**; it is timing-dependent, so it shows on some platforms and not others.
- `AutoDenylistTests` (added here) has the same exposure: its cap tests reach `AutoDenylist.Sweep`, which rents a `PooledRefList` without `mt`. The blocklist tests need no marking because `BlocklistSnapshot.Build` asks for the `mt` pool explicitly.
No production change — `STArrayPool` is the right pool on the game loop, where both `Sweep` and the property list actually run.
## Deliberately not included
Waiting for a fragmented four-byte seed at `AwaitingSeed`. It looked like a bug but the disconnect is a deliberate defence: only pre-0xEF clients reach it (0xEF goes through `HandlePacket`, which already waits for its 21 bytes), and waiting converts an instant drop into a full 5s slot hold for a client sending one or two bytes, or a loris dribbling a byte every few seconds. Against a fixed 4096-entry `MaxConnections` table that trades capacity that matters for a fragmentation case a reconnect already fixes.
## Summary
Two related fixes on the outbound path:
1. Consume **IORingGroup 1.0.8**, which allows more than one send in flight per socket, and expose the two settings that go with it.
2. Stop `NetState.Send` silently discarding packets when the send buffer fills — including an out-of-bounds write reachable in that state.
## 1. Send-path stall (RIO)
RIO reports send completion on **acknowledgement**, not on copy, so a completion cannot arrive sooner than one round trip. With one send in flight, `PostSend` refused to post again until the previous completion arrived — capping a connection at **one send per RTT** whenever it had data queued.
Measured on a 50ms-RTT production shard:
| | before | after |
|---|---|---|
| in-game latency, data flowing | **101–146 ms** | **48–51 ms** |
| p95 | ~135 ms | 52.8 ms |
| samples > 70 ms | 20 | **0** |
The control that confirms the mechanism: server-side post→completion was **unchanged** at median 92ms across both runs. The ACK-binding is inherent to RIO and did not move; only its propagation into application latency did.
Two things worth recording, because they explain why this went unnoticed:
- As little as **6 bytes** of queued data held the gate shut, so it reproduced in empty areas, not just crowded ones.
- The same measurement at loopback RTT is **microseconds**, so local testing could never surface it.
New settings, both restart-time:
- **`network.maxOutstandingSends`** (default 32) — sends in flight per connection. Honoured by RIO only; other backends complete sends on copy and report 1. Costs a request-queue and completion-queue slot per send, **not another buffer**, since every outstanding send addresses a different range of the same registered buffer. Worst-case added latency is roughly `completion RTT / value`.
- **`network.sendBufferSize`** (default 256KB) — per-connection send buffer, coerced to a power of two of at least the platform allocation granularity. This is the lever for the disconnects below, and the per-connection memory ceiling.
## 2. Send buffer full
`NetState.Send` had three failure modes once the buffer filled, none of them visible:
| writable | behaviour |
|---|---|
| `0` | `GetSendBuffer` returned false → **packet dropped**, no log, no disconnect |
| `4 … needed-1` | `Compress` returned 0 → `CommitWrite(0)` → **packet dropped** the same way |
| `1 … 3` | `safeOutputLength = (nuint)output.Length - 4` **underflows** → hot-loop bounds check never trips → **writes past the span** |
The first two leave a client connected while quietly missing game state, which is undiagnosable from either end. The third corrupts the in-flight region of the ring buffer, and is reachable precisely when a connection is congested, since callers only check for non-zero space.
`Compress` now refuses an output too small to bound, and `Send` reports exhaustion instead of dropping — logging and disconnecting with **needed / writable / unacked / capacity**. Those numbers separate a slow client holding the buffer from a buffer genuinely too small for the shard, which is the case that warrants raising `network.sendBufferSize`.
## Testing
`NetworkCompressionBoundsTests` covers the underflow using sentinel bytes around the output window. **Verified to fail without the guard** (4 failures from overwritten sentinels), confirming the out-of-bounds writes were real rather than theoretical.
Full suites green: **788 Server.Tests**, **597 UOContent.Tests**, Release build clean against the published 1.0.8.
## Notes for reviewers
- Upstream change: modernuo/IORingGroup#9.
- The buffer-full path is now *loud* where it used to be silent. If a shard has been quietly dropping packets under load, this will surface as disconnects — that is the intended outcome, and the log line says which setting to raise.
- Follow-up under discussion: promoting a connection to a larger buffer instead of disconnecting, which looks feasible on a live connection since buffers are referenced per-operation rather than bound to the request queue.
## Summary
Migrates the Old Guild System (pre-AOS guild stones) gumps from the legacy `Gump` class to `DynamicGump`, following the same pattern used for the Quest gump migration in #2416. All concrete gumps now have private constructors gated by static `DisplayTo` entry points (empty-gump rule), and `Singleton => true` is set across the board so reopening a sibling dialog automatically closes the previous one.
**Migrated gumps:**
- `GuildGump` - main guild dialog
- `GuildmasterGump` - guildmaster functions
- `GuildCharterGump` - charter and website display
- `GuildWarGump` - warfare status (kept as player-facing)
- `GuildWarAdminGump` - war menu (retained as player-facing - reachable from `GuildmasterGump`'s WAR button by guildmasters)
- `GuildChangeTypeGump` - Standard/Order/Chaos selection
**Abstract bases:** `GuildListGump` and `GuildMobileListGump` keep their shared list-rendering chrome inside a single concrete `BuildLayout` on the abstract class and expose a `protected abstract void BuildHeader(ref DynamicGumpBuilder builder)` hook for subclasses (replacing the old `Design()` override). This mirrors the abstract-base treatment used for the ML quest base in the quest-gump migration PR.
**Concrete subclasses migrated alongside the abstract bases:**
- `GuildListGump` subclasses: `GuildAcceptWarGump`, `GuildDeclarePeaceGump`, `GuildDeclareWarGump`, `GuildRejectWarGump`, `GuildRescindDeclarationGump`
- `GuildMobileListGump` subclasses: `DeclareFealtyGump`, `GrantGuildTitleGump`, `GuildAdminCandidatesGump`, `GuildCandidatesGump`, `GuildDismissGump`, `GuildRosterGump`
**Cliloc rule:** Every gump bakes per-instance dynamic content (guild names, member names, war declarations, candidate lists), which would defeat `StaticGump<T>` caching. Per the cliloc rule, all are `DynamicGump`.
**External callers updated:** the prompt files (`GuildAbbrvPrompt`, `GuildCharterPrompt`, `GuildDeclareWarPrompt`, `GuildNamePrompt`, `GuildTitlePrompt`, `GuildWebsitePrompt`), `RecruitTarget`, the `Guildstone` item, and the New Guild System `GuildInfoGump`'s Order/Chaos handler all now go through static `DisplayTo` entry points instead of `new XGump(...)`.
## Summary
Server-side movement throttle that prevents speed hacking while accurately identifying cheaters with detection of lagging connections.
**Key features:**
- Credit buffer (200ms) absorbs timing jitter from legitimate players
- Movement queue handles larger bursts, draining at proper game-tick intervals
- RTT measurement distinguishes network lag from speed hacks
- Queue depth detection catches ACK-throttled speed hacks (going straight)
## How It Works
**Throttle** (prevention): Movements arriving too early either consume credit or get queued. The queue drains at
correct intervals, so speed hackers can't move faster regardless of what they send.
**Detection** (identification): Combines multiple signals to identify cheaters:
| Signal | What it catches |
|--------|-----------------|
| Queue depth ≥4 sustained | ACK-throttled speed hacks (client limits unacked moves to 5) |
| Movement rate >1.05x | Direction-change speed hacks where timing is visible |
| Stable RTT + high queue | Eliminates false positives from laggy players |
**RTT-Aware Logic:**
- Probes only sent to players actively moving (event-driven, not global loop)
- Stable low-latency + problems = suspicious
- Unstable/high-latency + problems = probably just lag, throttle handles it
## Configuration
```json
{
"movementThrottle.maxCredit": 200,
"movementThrottle.softQueueLimit": 6,
"movementThrottle.hardQueueLimit": 10,
"movementThrottle.debugLogging": false
}
```
### Summary
- Bump IORingGroup 1.0.0 → 1.0.1 — fixes a disconnect handling bug in the native ring layer
- Fix ghost NetStates — Dispose() set _running = false before checking it, so the "force immediate disconnect" path
was dead code. Capture wasRunning before clearing it, add [Obsolete] guard, and route internal callers through
DisposeInternal()
- Fix unauthenticated socket cleanup — graceful disconnect on unauthed connections could get stuck with pending sends;
now force-immediate after Disconnect() if DisconnectPending is already set
- Replace ConcurrentQueue<NetState> _disposed with Queue<NetState> — server is single-threaded; moved the field into
the Network partial class where it's consumed
- Move ConnectingSocketIdleLimit into the Network partial class alongside DisconnectUnattachedSockets
- Reset activity timer on receive, not just send — receiving data directly proves liveness instead of relying on the
ping→pong→send round-trip to reset the timer
- Move CheckAllAlive from Timer into Slice — the timer fired before I/O completions were processed, so after server
stalls (world saves), buffered client pings hadn't reset timestamps yet, causing false disconnects. Now runs at the
end of Slice() after all recv completions are handled
- Lower inactivity timeout 90s → 30s, check interval 90s → 5s — clients ping every ~1s, so 30s of silence is ~30
missed pings; worst-case detection drops from ~180s to ~35s
- Simplify CheckAlive — early-return when socket is null or alive; force-kill stuck DisconnectPending sockets
immediately instead of calling Disconnect() again
- Remove unused imports from GameEncryption.cs
> [!IMPORTANT]
> **Breaking Changes**
> - DecodePacket and EncodePacket delegates replaced with IClientEncryption interface
> - NetState.Connection (Socket) replaced with internal RingSocket management
> - NetState.RecvPipe and NetState.SendPipe removed (buffers managed internally)
## Summary
Upgrades the networking stack from PollGroup-based I/O to io_uring, significantly improving I/O performance on Linux.
This also adds native client encryption support for encrypted UO clients.
## Major Changes
io_uring Networking Architecture
- Replaced PollGroup with IORingGroup for async socket I/O operations
- Removed Pipe.cs (mirrored ring buffer) and TcpServer.cs in favor of RingSocketManager
- Added NetState.Network.cs - centralized network infrastructure handling accept, recv, send, and disconnect
completions
- Added SocketHelper.cs - platform-specific socket utilities for raw socket handle operations (getpeername,
getsockname)
- Buffer management now handled by RingSocketManager with configurable slab allocation
### Client Encryption Support
- Added full encryption stack in Network/Encryption/:
- EncryptionConfig.cs - configurable encryption modes (None, Unencrypted, Encrypted, Both)
- EncryptionManager.cs - encryption detection and initialization for login/game packets
- LoginEncryption.cs - handles login packet encryption with version-derived keys
- GameEncryption.cs - handles game server encryption using Twofish
- TwofishEngine.cs - optimized Twofish block cipher implementation
- LoginKeys.cs - encryption key table for client versions
- IClientEncryption.cs - interface for client encryption implementations
### NetState Improvements
- Replaced Socket Connection with RingSocket _socket for managed socket lifecycle
- Changed from GCHandle polling to event-based completion processing
- Disconnect handling now properly waits for pending sends to flush
- Simplified connecting socket management using lazy queue removal
### Configuration
- New settings: network.encryptionMode and network.encryptionDebug
- Encryption mode flags: Unencrypted, Encrypted, or Both
### Dependencies
- Replaced PollGroup NuGet package with IORingGroup
- Linux requires liburing-dev / liburing-devel package
### Test plan
- Verify server starts and accepts connections on Linux with io_uring
- Verify server starts and accepts connections on Windows (fallback to IOCP)
- Test unencrypted client connections (ClassicUO with encryption disabled)
- Test encrypted client connections if available
- Verify graceful disconnect flushes pending data
- Confirm CI builds pass on all target platforms
### Summary
* Bumps to .NET 9 with updated dependencies
* Comparing a value type against null is no longer allowed
* CI/CD now uses the version specified in global.json
* Serialization generator updated to .NET 9 with bug fixes, fixes to turkish language, and parallelization
### Summary
- Puts back `EventSink.SocketConnect`.
- Reverts networking change to push the networking to a separate thread.
- Reverts changes to the firewall by removing the firewall queue.
- Fixes listeners not shutting down with the server.
- Fixes race condition causing connections to get stuck even after they are disposed.
> [!NOTE]
> **Developer Note**
> Networking has been reverted back to using the main thread instead of a background thread. This alleviated complexity and the requirement for concurrent queues all over the place.
> [!Important]
> **Developer Note**
> This code change will **completely move gumps out of the core**
### Summary
- Adds `GetGumps()` convenience which exposes methods to Find/Close/Send multiple gumps. This helper is a performance improvement by eliminating the Dictionary<Player, List> lookup for gumps.
### Summary
- Fixes various exploits that can crash the shard when the client misbehaves.
- Clients will now be disconnected if they send packets that are marked as out of game only (new flag), while they are in-game.
> [!Note]
> **Developer Note**
> Added an `OutOfGameOnly` which should be used to flag packets as only available out of the game.
> This is the opposite of, yet not the converse to `InGameOnly`.
> [!Warning]
> **Developer Warning**
> The `PacketThrottle` callback return value is now reversed. `true` indicates the connection is _throttled_.
### Summary
- Fixes an issue where connections get stalled forever
- Fixes an issue where the throttler is not working properly
- Removes account attack limiter
- Rewrites IP limiter
- Removes IP restrictions (they weren't used, and not practical)
- Fixes issue where IP limiter was counting before firewall was blocking.
View without whitespace:
https://github.com/modernuo/ModernUO/pull/1796/files?diff=split&w=1
# New Gump API
We are pleased to release a new API that is faster, allocates nearly zero memory, and still feels very similar to the original API. The API is broken into 3 types of gumps, dynamic, static with placeholders, and static without placeholders.
### Dynamic Gumps
These gumps will inherit `DynamicGump` and are meant for gumps that have a dynamic layout. This includes specifying dynamic arguments to HtmlLocalized entries.
## Static Gumps
Static gumps are those where the function to the build the layout is called only once and cached forever. They can optionally have placeholders. These placeholders allow the developer to specify the string values later, dynamically in a `BuildStrings` method on the gump. If a gump does not have any placeholders, the string entries will also be cached forever.
## Benchmarks
To make sure we were going in the right direction and not wasting time, we took copious benchmarks. Here are the final benchmarks for a really simple gump.
Note:
* The majority of creating a gump is compressing the layout and the strings. Compressing each section takes ~6,000ns (12us total).
```cs
| Method | Mean | Error | StdDev | Median | Ratio | RatioSD | Gen0 | Allocated | Alloc Ratio |
|------------------------------- |-------------:|-------------:|-------------:|-------------:|------:|--------:|-------:|----------:|------------:|
| OldGump | 13,308.29 ns | 1,059.695 ns | 1,883.608 ns | 14,330.72 ns | 1.000 | 0.00 | 0.1526 | 2400 B | 1.00 |
| DynamicLayoutGump | 13,357.86 ns | 129.144 ns | 226.185 ns | 13,323.60 ns | 1.029 | 0.17 | - | 48 B | 0.02 |
| StaticLayoutDynamicStringsGump | 6,653.10 ns | 81.815 ns | 143.292 ns | 6,617.45 ns | 0.514 | 0.09 | - | 40 B | 0.02 |
| StaticLayoutGump | 86.33 ns | 0.760 ns | 1.350 ns | 86.07 ns | 0.007 | 0.00 | 0.0020 | 32 B | 0.01 |
```
# Non-Breaking Changes
* All gump components in the core have been moved to `Gumps/Legacy`.
* All legacy gumps will still inherit `Gump`, which now inherits `BaseGump`
# Special Thanks
Thank you to @stefanomerotta for considerable contributions/benchmarking/testing to make this effort a reality! We collectively went through over 10 iterations, but it is finally ready.
## Breaking Changes
* The Firewall and IP Limiter have been rewritten. Please read the notes carefully!
* `TcpServer.Instances` moved back to `NetState.Instances` - sorry - it was stupid to move it to begin with.
> [!Note]
> Sockets that fail the IP Limiter or Firewall will be immediately and forcibly disconnected.
> This means they will be stuck at "Verifying account..." if it was a real client.
### Summary
- Removes firewall wildcard support.
- Removes `AccessRestrictions`.
- Moves Firewall/IPLimiter to the core.
- Moves `TcpServer` to its own thread.
- Removes the `SocketConnect` and `SocketDisconnect` event sinks.
- Moves `Instances` back to `NetState.Instances`.
- Fixes a long standing bug with bad handling of duplicate listener addresses.
#### Firewall
The firewall has been completely rewritten. There is now an "Admin Firewall" which saves to the config file. Secondarily, there is an internal firewall used exclusively by the TcpServer while processing sockets. The Admin firewall mirrors it's additions/deletions to the internal firewall by adding requests to a queue.
> [!IMPORTANT]
> **Wildcard firewall entries, such as `X`, `*`, `?` are not allowed.**
> **Ranges in between IP classes or sextets are not allowed.**
> **Please make sure to use one of the following:**
> * IP Address - `192.168.1.1`
> * CIDR - `192.168.1.0/24`
> * Range - `192.168.1.1-192.168.1.100`
#### IP Limiter
The IP Limiter has been completely rewritten. The available configurations are:
```json
"ipLimiter.enable": "True",
"ipLimiter.maxConnectionsPerIP": 10,
"ipLimiter.clearConnectionAttemptsDuration": "00:00:00:10",
"ipLimiter.clearThrottledDuration": "00:00:02:00",
```
The IP Limiter is set up to prevent spamming connections from the same IP. Every time an IP connects, it is added to a connection list. After 10 attempts, the IP is added to the throttle list. To keep the system fast, the connection list is entirely wiped every 10 seconds, and the throttle list is entirely wiped every 2 minutes.
### Summary
* Fixes syntax compile error when THREADGUARD is enabled.
* Removes `int packetLength` from incoming packet handles since they aren't needed.
### Developer Notes
Incoming packet handler `SpanReader` is now properly scoped to that packet by length.
## Breaking Changes
Incoming packet registration signature has changed to:
```cs
delegate* void OnReceiveCallback(NetState state, SpanReader reader, int packetLength);
IncomingPackets.Register(int packetID, int length, bool ingame, OnReceiveCallback onReceive);
```
For example, an incoming packet handler signature would now look like this:
```cs
public static void SomeIncomingPacket(NetState state, SpanReader reader, int packetLength)
{
// Parse the data
}
```
## Summary
Updates the network Pipe class to use a mirrored memory technique. This technique involves mapping the same physical memory to two contiguous virtual memory spaces so the byte buffer appears duplicated. This allows writing to a double-sized array to wrap around without the need for the `CircularBuffer` classes.
In practice this allows us to use `Span<byte>` as if the buffer was a regular array.
### Bug Fixes
- [X] Fixes bad fixed length string parsing
### Summary
- Removes Fastwalk system
- Removed the following settings:
- `movement.enableFastWalkPrevention`
- `movement.fastwalkExemptionLevel`
- Adds movement throttle system.
- Adds the following settings:
- `movement.throttleReset` - Default value is `1000` (1 second).
- `movement.throttleThreshold` - Default value is `400` (400ms).
### Movement Throttling
This new system will trigger if a player requests 400ms (configurable) worth of movements quicker than wall clock time. When this happens, the player is throttled (all incoming packets to the server are halted) until wall clock time catches up with the requests. Upon each throttle, the player receives enough credit to handle up to 400ms of "lag" as a grace/catch-up.
### Developer Notes
We use two throttle queues to prevent an infinite loop.
**Only one functional change**
* Fixes a bug in LogFactory where `Warning` is being logged as `Information`
Non-functional changes:
* Updates/Fixes copyright headers
* Removes namespace scopes for core files.
View with [whitespace off](https://github.com/modernuo/ModernUO/pull/1187/files?w=1).
- [X] Fixes issue with wepoll losing GCHandle.
- [X] `NetState.Disconnect()` is no longer thread safe.
- Use `Core.LoopContext.Post()` to post disconnects
- [X] Optimizes PollGroup by not processing IntPtr -> GCHandle for discard polls.
Fixes an issue with DropReq where an old client was sending in 14 bytes, but the server was expecting 15 bytes.
To fix this we introduced a new packet handler, `ContainerGridPacketHandler` and changed the code to determine the length of the packet dynamically using `GetLength(NetState)`.
Also fixed throttling so dropped packets are properly skipped.
* Adds MinRequired and MaxRequired settings
* Removes god client detection
* Streamlines the kick messaging
* Fixes detecting client version on mac/linux
### Enabling Packet Logging
`[packetlogging on` and target the user.
Supports command modifiers such as:
`[online packetlogging on where accesslevel = player`
Logs are saved in `path/<ip address>/packets.log`. It is a simple append-format log with no date splitting.
* Now reads Prof.txt to get the professions
* The templated professions are based on profession `TrueName`
* Adds missing starting equipment
* Implements gargish starting equipment
* Consolidates some of the code
* Moves TC stuff to the TC file.
* Fixes some starting equipment that was wrong.
Note:
* Implementing the original T2A professions is possible on the client side, but requires moving the old clilocs to the current clilocs file. In the current file the entries are blank.
* Using the original LBR professions (they match AOS but without necromancy/chivalry) is kind of confusing because the profession indexes are ripped out of the UOTD/UOR ones and have non-sequential indexes. This will probably cause confusion and people will get no templated items when they select the wrong profession.
