## Summary
About 114 tests skipped on CI because they needed the official client files (`tiledata.mul`, map and multi files). They gave CI no signal, and locally they ran against whichever client a developer had installed. The test hosts now build their own world instead, so every test runs on CI and runs the same on every machine. CI simulation: Server.Tests 837 passed, UOContent.Tests 1131 passed, **0 skipped**.
- **Generated tile data.** The fixtures write a pre-HS `tiledata.mul` from a small invented tile kit (`Server.Tests/Terrain/TestTiles`) and load it through the real `TileData.Load()`. The test hosts no longer read any client directory (`MODERNUO_CLIENT_PATH`, `MODERNUO_TEST_DATA_DIR` and `C:\Ultima Online Classic` are gone from test code). The file is written to `SyntheticData` in each test project's output, overwritten every run and removed by `dotnet clean`.
- **Injected terrain.** `TestTerrain` stamps land and statics into Felucca and Trammel, which share one terrain. Writes after startup must go in a `TestTerrain.Scope()`, which puts back every block it touched and keeps the step cache fresh.
- **Prefab scenes.** Seven named scenes (town, causeway, sewer walkway, coastline, deep sea, map-edge sea, an upstairs room with an L-shaped counter) replace the Britain coordinates the pathing, AI and fishing tests relied on. Each scene-based test asserts its scene is present first, so a missing scene fails instead of passing on flat ground. Stamping all seven takes 3-5 ms.
- **Multi footprints.** Contrived footprints for the three multi IDs content looks up (0x74, 0x7A, 0x0) are seeded through a new internal `MultiData.SetComponents`.
- **Fingerprint.** `StepCacheFile.HashTileDataFile` is extracted so a test can show that a one-flag change to the file changes the fingerprint, while runtime table mutation does not.
### Engine changes
- `TileMatrix.GetLandBlock`/`GetStaticBlock`: on a map without its files, return the block injected with `SetLandBlock`/`SetStaticBlock`, or the default when nothing was injected. Maps with files take the same path as before.
- `MultiData.SetComponents` (internal): registers a footprint without multi files.
### Test changes worth a look
- Values that were properties of real Britain terrain (probes at Z 10, a pinned plain walk mask of 0xC1) are re-pinned to the synthetic plain (Z 0, 0xFF).
- No tests were deleted. The multi walkability and boat-deck tests assert movement behaviour over a footprint, not what a real multi looks like, so they run on the contrived footprints.
- Maps 0 and 1 keep file indexes 0 and 1, and every stamp writes both, rather than sharing one file index. On a map without files the getters never consult the shared-file cache, and its patch bits would hide one facet's injection from the other.
## Test plan
- [x] `dotnet test -p:SolutionDir=... --filter "Category!=Manual"` with the client env vars pointed at an empty directory: 837 + 1131 passed, 0 skipped, 0 failed
- [x] Mutation check: removing the step-cache clear from `TestTerrain` makes the stale-cache tests fail
- [x] CI green on all platforms
Follow-up to #2721. It fixes how the remaining tests behave and changes no production code.
## CI
- Both `dotnet test` steps pass `--filter "Category!=Manual"`. Before this, Manual-tagged tests ran on CI anyway.
- The one surviving movement-throttle latency test is the only coverage of burst forgiveness over a full, wrapped history. It loses its Manual tag, so it runs on CI.
## Tests that passed on CI without testing anything
- **Corpse and throwing tests.** They relied on tiledata for the weapon `Layer`, so on CI the equip silently failed and they asserted against empty lists. They now set `Layer` explicitly and assert the equip took effect. `TestThrown` also pins its own strength and range values, so a shard retuning SoulGlaive no longer breaks them.
- **Healthbar poison rows.** Server.Tests registers no poisons, so every row tested `null`. They now use real poison levels.
- **Account packet tests.** The mock accounts reported `Length` 0, so the character-list tests only ever encoded empty slots. They now encode the real characters.
- **Pathing and AI tests that only mean something on real Trammel/Felucca terrain** are now guarded with `TileDataRequirement.SkipIfMissing()`: Britain desk and clutter scenes, house footprints (no MultiData on CI) and fingerprints. Tests that are valid on flat blank terrain stay unguarded. (A synthetic tiledata fixture to run these on CI is a planned follow-up.)
- **Assertions that couldn't fail now check their claim.** Affected tests include the `DefaultWalker` cache use, cache on/off parity requiring a path, the recorder capability flags, the idle-pet gate, the monthly DST recurrence, the AdvancedSearch `Record.Exception` wrappers, `CanFitItem` with no branch-guarded assert, the Firewall callback, and `Import_NoMap`. The Geometry Parse asserts also now use the same input as their TryParse.
## Shared state
Every test that changes process-wide state now restores it, even when an assert fails:
- **The clock.** A new `TimerWheelScope` saves and restores `Core._tickCount`, `Core._now` and the timer wheel. `SimulatedClockScope` covers decay tests.
- **StepCache settings and caches**, via `StepCacheStateScope`.
- **Network state.** The ManualAllowlist, LoginAllowlist, firewall and BanChannel reporters are restored. Global packet handlers are now registered per test and removed afterwards, so they no longer stay registered for later tests.
- **Data and config tables.** `ArchiveJournal` statics, `TileData.ItemTable`, `ObjectPropertyList.Enabled`, `Core.Expansion` and the localization table are restored. One `MobileStatusVersion` restore was resetting a different expansion than the one the test changed.
- **Entities.** Tests with fixed serials now delete what they create. Fixed mobile serials moved to `World.NewMobile`, because deleting a hard-coded serial could unregister a live entity.
- **Collection race.** `SpiralScanTests` no longer clears the spawn cache from a separate collection that could run in parallel with the cache-manager tests.
- **Shared statics.** Classes reading shared static allowlists joined the sequential collection.
## Duplication
New shared helpers replace copy-pasted harness code:
- **Server.Tests:** `PacketAssert.Sends`, used by about 130 packet tests; `TestClientHarness`, `PersistencePipelineScope`, `NetTestHelpers`, `EntityCleanup` and one `TestMulti`.
- **UOContent.Tests:** `TimerWheelScope`, which also holds one wraparound-safe `RunFor`/`RunUntil`; `AiTestStubs`, which merges six walker copies and five identical creature stubs; `MobileTestHarness`, `CommandTestHarness` and `TempDirectory`.
Dead oracle packet classes are removed.
## Cost
| Test | Before | After |
|---|---|---|
| `VirtualSerialTests` | 1.57s | 2ms (starts near the wrap via reflection instead of drawing ~17.9M serials) |
| Event scheduler recurrence loop | 473ms | 1ms |
| CrowdSec drain | 517ms | 16ms (event-driven instead of a fixed 500ms wait) |
| AuthId tests | 248ms | 99ms (SHA2 except the two GameLogin tests) |
| Container cap tests | 5,000 items | 3,449 / 3,277 (one past each protocol cap) |
| Bulk removal | 100k children | 20k children |
| OPL hash distribution | 60k builds | 10k builds |
## Shard-tuning decoupling
- AI assertions read `ReacquireDelay` and `FollowMoveSpeed` instead of hard-coding production tuning.
- The guard friendly-fire test uses an `AI_Mage` stub instead of WhiteWyrm.
- Argon2 assertions pin the `argon2id` variant and `v=19` but read the cost parameters from the configured hasher.
## Tests
| Run | Server.Tests | UOContent.Tests |
|---|---|---|
| With client files | 812 pass | 1,123 pass |
| Without client files (CI simulation) | 800 pass, 12 skip | 1,021 pass, 102 skip |
- The UOContent fixture reads `MODERNUO_TEST_DATA_DIR`; Server.Tests reads `MODERNUO_CLIENT_PATH`.
- The 15 new UOContent skips are the map-dependent guards above.
- Total run time with client files is about 5s, down from about 8s.
Started as an allocation pass over `StepCache` and grew into a cleanup of the surrounding pathing engine. Four commits, each independently reviewable; net **−560 lines**.
Build clean (0 warnings). All 122 `Server.Tests.Pathfinding` tests pass.
---
## 1. `perf`: pool the strata buffer, cut a hot-path dictionary lookup
**The headline is that `TryGetMask` — the actual hot path — was already allocation-free.** `StepMask` is a readonly struct, `StaticTileEnumerable` is a `ref struct`, `ChunkMissState` is a struct in a `Dictionary`. So most of this is a bake-throughput and GC-churn win, with one exception noted below.
`BuildChunk` accumulated packed multi-Z strata into a `List<byte>` that grew by doubling (256 → 512 → 1024 → …) and then paid a final `ToArray()`. A full map bake runs it ~114k times. It now writes into a `byte[]` rented from `STArrayPool<byte>.Shared` through a span writer, and hands the chunk one exact-size copy.
**This required fixing a latent out-of-bounds guard.** The record-fit check reserved headroom for **8** strata (`StratumByteLength * 8`) while `ComputeStandableSurfaceZs` can return up to **16** — so a cell could write 305 bytes starting from a 65,383-byte offset. Against a `List` that was benign (it just grew past 64 KB, and emitted offsets stayed under the `NoStrata` sentinel). Against a fixed-size rented buffer it is an out-of-bounds write, so tightening it was a *prerequisite* for the pooling, not a drive-by. The guard is now exact, which additionally proves no emitted offset can collide with `NoStrata == ushort.MaxValue`.
**One genuine query-path win:** `ShouldPromoteAfterMiss` did *two* dictionary lookups per miss — a `TryGetValue`, then an indexer assignment that re-hashes and re-probes. It now mutates in place via `CollectionsMarshal.GetValueRefOrNullRef`. This runs on every uncached chunk touch during A* expansion. The window-expiry branch keeps its explicit early return, so `MissPromotionThreshold == 1` still resets rather than promoting.
Also dropped `StepProbe.ComputeStrataAt` / `ComputedStratum` (dead code, zero callers) and collapsed six 18-argument `new StepMask(0, 0, …, kind)` blocks into `Fallthrough(kind)`.
**Considered and rejected:** pooling the `Direction[]` that `Find` returns. It *escapes* the call — `MovementPath` holds it across ticks while `PathFollower` walks `m_Index` through it — so it cannot be rented-and-returned, and it cannot be borrowed from the shared `BitmapAStarAlgorithm.Instance` without one creature clobbering another's in-flight path. `CheckPath` rate-limits repaths to one per 2s per creature, putting this at roughly 60 KB/sec at 1,000 pathing creatures. Not worth a public API break plus a use-after-return footgun.
## 2. `docs`: rewrite the comments for publication
The comments had accumulated as development notes: internal phase jargon (`Tier 4`, `the Phase-2 synthesizer`), change narration aimed at a reviewer (`which the old ComputeStandingZ anchor missed`, `legacy behavior`), benchmark anecdotes (`benchmarked as near-optimal`, `a ~20 ns lookup`), and paragraphs restating the code.
Rewritten to keep the rationale you cannot recover by reading the code — why the source-Z guard cannot be widened, why multis fall through with a halo, why the promotion gate counts Finds rather than calls, why `ComputeFingerprint` must hash the *files* and not the live tile tables — and drop the history that got us there.
Three comments were **factually wrong**, not just wordy:
- `CacheEvictionTimer` and `CacheStats` documented a class called `StaticWalkabilityCache`. No such class exists — it is `StepCache`.
- `StepCacheFile` declared `File layout v8` while `FormatVersion` is 9, and called the current record layout "the v6 layout" in four places. The layout descriptions are now unversioned so they cannot drift again.
- `StepProbe.ComputeStandingZ` claimed `StepCache` uses it to bake `SourceZ`. It has not since the baker moved to the clearance-aware `ComputeStandableSurfaceZs`; only a parity test calls it.
## 3. `refactor`: simplify `StepCacheFile.Write`, consolidate the format tests
`SaveToFile` walked `_keysList` **twice** — once to count the map's chunks, then again through a `ChunkEnumerator` closure to emit them — because `Write` needed the count up front to size its index array. Both loops had the same root cause. Passing a **span** collapses them: the count is just `span.Length`.
That deletes the `ChunkEnumerator` delegate, the closure over the list enumerator, and **both `InvalidOperationException` throws**, which existed only to police the delegate's "yield exactly `chunkCount` chunks" contract — a contract a span makes unrepresentable.
`Write` now patches the header's `IndexOffset` by seeking back to it rather than reaching into the writer's live buffer with `BinaryPrimitives`. That also retires `IndexOffsetFieldPosition`, a hand-maintained byte offset that had to track the header layout, and sidesteps the stale-array hazard that motivated the manual patch (`BufferWriter` reallocates on growth).
**Tests:** `StepCacheFileV6/V7/V8Tests` were named for the format version that introduced each transform — and the format is now **v9**, so all three names described formats the loader rejects outright. Beyond triplicated builders and plumbing, two things were actually broken:
- The three near-identical rejection tests each cited a `MinSupportedVersion` that had since moved (`"version 5 < MinSupportedVersion 6"`, `"6 < 7"`, `"7 < 8"`). They passed for the wrong reason.
- `AssertBaseEqual` (used by V7 and V8) **silently skipped the swim and strata trailers**. A regression dropping either would not have failed those tests.
Now one `StepCacheFileFormatTests`, named for behavior — predictive-Z elision, compression, compact index — with a single `AssertIdentical` that does check both trailers, the three rejection tests folded into one theory that also covers a future version, and a zero-chunk case the delegate-based writer never had coverage for.
## 4. `test`: consolidate the parity and lifecycle tests
Three files tested "parity" and none of the names said *which*. They were three different layers, and the seams are the useful part, so they are now one `StepCacheParityTests` that names them:
| Test | Compares | Answers |
|---|---|---|
| `ProbeMatchesSlowPath` | StepProbe vs MovementImpl | Is the bake right? |
| `CacheMatchesProbe` | StepCache vs StepProbe | Is it stored and returned intact? |
| `CacheServesReachableWalkStates` | StepCache vs MovementImpl | End to end, over the states A* visits |
Merging removed a duplicated stub `Mobile`, duplicated region seeds, and a filename/class mismatch (`StepProbeParityTests.cs` declared `StaticWalkabilityParityTests`). `SwimBake_ProducesWetCells` moved with it — it lived in the cache parity file but never touched the cache.
Tests reached into `StepCache._chunks` via `GetField` in **9 places**, each rebuilding the key encoding and cell-index arithmetic by hand. `StepCache` now exposes `GetResidentChunk` and `ResidentIndexInSync` alongside the internal test hooks it already had (`LazyReaderHasChunk`, `CurrentFindGeneration`), and the shared arithmetic moved to `PathingTestSupport`. All 9 reflection blocks are gone.
`StepCacheLifecycleTests` is regrouped by what it covers — promotion gate, fallthrough routes, strata, swim layer, eviction — with the `Tier4*` names dropped. Removed `Singleton_IsAvailable`, which asserted an inline-initialized static property was not null; that is the entire 123 → 122 test-count delta.
---
## Verification
Tests were mutation-checked rather than just run, since round-trip and parity tests can pass while a transform silently no-ops:
- Injecting an off-by-one into the `IndexOffset` patch fails **15 of 123** — the format tests are load-bearing.
- Offsetting the cache's cell index by one fails **7 of 10** parity cases, and the 3 that stay green are exactly the ones that do not touch the cache. The layering localizes a fault rather than just reporting one.
## Problem
Three coupled issues, each hiding the next:
1. **CI passed despite failing tests, with no test logs.** ([example run](https://github.com/modernuo/ModernUO/actions/runs/28639143286/job/84931544255) — the `Test` step produced zero output and the job went green.)
2. **Two `EmitsLowerStatReqWhenPassed` tests** fail with `KeyNotFoundException: '1060435'`.
3. Once CI actually ran the tests, **~337 UOContent tests failed** with `FileNotFoundException: tiledata.mul was not found` — the test bootstrap force-loaded copyrighted client data that CI doesn't have.
## Root causes & fixes
### 1. CI ran zero tests (`fix(ci)`)
The `Test` step ran `dotnet test --no-restore`, but the `Build` step only restores/builds `Application` — never the test projects. Without a restore, the test projects have no `project.assets.json`, so `Microsoft.NET.Test.Sdk`'s targets aren't imported, they aren't recognized as test projects, and `dotnet test` runs the `VSTest` target against **zero** projects → no output, **exit 0**.
- Both jobs now run `dotnet test --logger trx --results-directory ./TestResults` (test projects restore and run) **plus a guard** that fails the job if no `.trx` is produced — a permanent backstop against silent zero-test passes.
### 2. Impossible OPL tests (`fix(ci)` + `test(opl)`)
#2501 deliberately emits `LowerStatReq` (`1060435`) **inline in each item**, not in `GetProperties`. A follow-up "fix" dropped the `lowerStatReq:` argument to make the tests compile but left the assertions expecting `1060435`.
- Removed the two impossible tests, then removed the **entire `Tests/PropertyList/` OPL attribute set** from #2501: these assert exact cliloc/value/order of OPL emission per item base — a one-time proof of the #2501 rewire, now a permanent tax on modding (any admin reorder/value change/added line reddens the build). The one non-trivial case (LowerStatReq) is what just broke, because the test was wrong. Inline emission stays covered by the `BaseArmor`/`BaseClothing` tests.
### 3. Tile-data-dependent tests crashed CI (`test(uocontent)`)
UOContent.Tests' collection-fixture constructor force-loaded `tiledata.mul` unconditionally. On CI (no client files) it threw, and xUnit failed **every test in the collection** with the same error — mostly collateral (packet/scheduler/spawner tests that don't need tile data).
- Mirror Server.Tests' graceful pattern: `TestServerInitializer` probes for `tiledata.mul` and only loads tile/multi data (and runs the tile-dependent configure steps) when present, exposing `TileDataLoaded` so the fixture no longer throws.
- Add a shared `TileDataRequirement.SkipIfMissing()` guard and apply it to exactly the **31** pathfinding/multi/AI tests that genuinely need real tile data (`[SkippableFact]`/`[SkippableTheory]`).
## Verification (all local)
| Scenario | Server.Tests | UOContent.Tests |
|---|---|---|
| **Client data absent (CI)** | 726 pass, 17 skip, **0 fail** | 469 pass, 32 skip, **0 fail** |
| **Client data present (dev)** | 726 pass, 0 skip, **0 fail** | 501 pass, 0 skip, **0 fail** |
- Full `dotnet test` exits **0**; TRX files produced; the no-test guard trips (exit 1) only when zero `.trx` are produced.
## Summary
Fixes the pathfinding step-cache (`.swb`) prebake so it bakes **once** and skips when a valid cache already exists, instead of re-baking on every boot. The root cause was the staleness fingerprint hashing mutable in-memory tile data rather than the on-disk files. This PR makes the fingerprint a pure function of the client data files and separates dynamic multis (houses/boats) from the static cache.
> This branch builds on the `ConfigurePrompts` first-boot-prompt unification (commit `5df8d0bd`, also included here) — that commit accounts for the `ServerConfiguration.cs` and `dev-docs/server-lifecycle.md` changes in the diff.
## The bug
With `pathfinding.prebakeMaps` set, the cache re-baked on **every** boot. The `.swb` staleness fingerprint hashed the live `TileData.LandTable`/`ItemTable` flags, which the server patches at runtime (`ItemFixes`, `LOSBlocker`, `PotionKeg`, `CTF`) at nondeterministic lifecycle points (Initialize-phase methods share a priority; static ctors fire lazily). So a fingerprint stamped at runtime (`[PathBake`) never matched the one recomputed during startup `Initialize()`, and the cache rebaked every time.
## Changes
**1. Fingerprint the files, not the in-memory tables** (`fix`)
Hash `tiledata.mul` (cached, computed once) plus the per-map `.mul`/`.uop` files — never the runtime-mutated `TileData` tables. The fingerprint is now lifecycle-stable. Existing `.swb` files rebake once after deploy, then stay stable.
**2. Compute the fingerprint once per boot** (`refactor`)
`Configure()`'s `AutoLoadAtStartup()` already opens and fingerprint-validates a reader for every up-to-date `.swb`. `Initialize()` now skips baking any map that already has an open reader (`StepCache.HasLazyReader`) instead of recomputing the fingerprint a second time.
**3. Bake static-only; route multis to the live path** (`refactor`)
Multis (houses/boats) are dynamic, so they're no longer baked into the static chunk cache — they were tagged with `BuiltMultisVersion`, a non-persisted session counter, which made persisting them unsafe (false matches / wasted re-bakes).
- Chunks bake land + `statics.mul` only.
- At query time, any cell whose sector (or its 1-cell halo) contains a multi routes to `Fallthrough_Multi` → the existing live, multi-aware `CheckMovement` path. The halo prevents a cell proposing a walkable edge into a neighbouring wall; interior (multi-free) cells pay one sector lookup.
- Adds `Sector.HasMultis` (one engine accessor); `.swb` format → v9 (rejects old multi-baked files); new `Fallthrough_Multi` telemetry.
- Behaviour-preserving: multis use the same live path the engine used before the cache existed.
**4. Comment polish** (`style`) — no behaviour change.
## Testing
All green: **92** pathfinding (incl. a new fingerprint-stability test and a multi-halo fallthrough test), **423** UOContent, **708** Server.
## Follow-ups (not in this PR)
- **Background bake worker** — make `[PathBake` and the boot prebake non-blocking (game thread serves tile reads to an off-thread worker).
- **Per-multi MCL cache** — cache walkability in each multi's own frame (keyed by multiID, movement-invariant) so houses/boats get a fast path instead of the live fallback.
- **House-pathfinding equivalence tests** — the one area not yet covered by a dedicated automated test; multi pathing is currently correct by delegation to the live path.
## Summary
Closes the Cold-cache regression flagged in PR #2450. `StepCache.TryGetMask` no longer eagerly runs `BuildChunk` on the first miss for a chunk that isn't in a `.swb` lazy reader. Instead it returns `Fallthrough_NotBuilt` and the caller (`BitmapAStarAlgorithm`) takes the per-cell slow path. The chunk is only promoted to the bitmap fast path after the **second** miss within a 30-second window, filtering single-touch pass-throughs.
This makes BitmapAStar's worst-case (cold cache + short hops) collapse from **12–47× slower** than FastAStar to **roughly the same**, which is the floor the slow path can deliver. Steady-state warm performance (the actual deliverable) is unchanged from PR-5 — it was always the cache fast path.
## The pet-follow scenario this fixes
A mounted player at ~4 tiles/sec with a pet/hireable following will trigger an NPC pathfind every 100–300 ms. Each pathfind is 1–6 tiles. As the player crosses chunk boundaries (~4 sec/chunk), the pet's first pathfind in the new chunk under the previous behavior triggered a full ~700 µs `BuildChunk` for a chunk the player would leave shortly after. At 50–100 mobiles per shard, this exceeded the 8 ms tick budget. PR-5 BDN data showed scenarios 6–9 (2–8 tile NPC perception) at 2,300–3,700 µs Cold vs FastAStar's 80–200 µs.
Under the new gate:
- First miss → `Fallthrough_NotBuilt` → caller uses slow path (~30–50 µs short path). No `BuildChunk`. No allocation.
- Player keeps moving → chunk never gets a second touch within window → never promoted, no rot.
- NPC patrolling a fixed territory → repeatedly hits the same chunks → second touch within window → promote → cache fast path on subsequent calls.
## What changed
- **`CacheHitKind.Fallthrough_NotBuilt = 6`** + **`CacheStats.FallthroughNotBuilt`** counter. `IsHit=false`, so the caller routes to slow path.
- **`StepCache._chunkMissTracker`** — `Dictionary<long, ChunkMissState>` capped at 4096 entries. State is `(byte missCount, uint lastMissTickStamp)` keyed by chunk key. Window-expired entries reset count to 1; capacity overflow prunes window-old entries first.
- **`StepCache.MissPromotionThreshold`** (default `2`) and **`StepCache.MissPromotionWindowMs`** (default `30_000`) — tunable, can be wired through `ServerConfiguration` if shards want different policy. Setting threshold to `1` restores legacy eager-build behavior (used by tests that prime chunks via single `TryGetMask` call).
- **`StepCache.TryGetMask` miss branch** — try lazy reader first (file-loaded chunks bypass the tracker entirely; an `.swb` represents an explicit prior decision to keep the chunk warm). Otherwise consult the tracker.
- **`BitmapAStarAlgorithm.GetSuccessorsSlowPath`** now layers `IsBlockedByDynamic` on top of `CalcMoves.CheckMovement`. Previously the slow path only ran for `CanFly` creatures and rare cache fallthroughs — `CheckMovement` doesn't iterate same-cell mobiles, so the bitmap fast path's `IsBlockedByDynamic` was the only mobile-blocking check. Now first-touch pathfinds run through the slow path, so the gap had to close.
## Tests
50 pathfinding tests pass (was 47). New / updated:
- **`TryGetMask_FirstTouchOnUnbuiltChunk_DefersBuildAndReturnsFallthrough`** — single TryGetMask call returns `Fallthrough_NotBuilt`, no chunk built, no allocation.
- **`TryGetMask_SecondTouchWithinWindow_PromotesAndBuilds`** — second call inside the 30s window builds + serves.
- **`TryGetMask_SecondTouchAfterWindow_RestartsCounterAndDefers`** — second call outside the window restarts the count, returns Fallthrough again.
- **`TryGetMask_DistinctChunks_TrackedIndependently`** — counters are per-chunk; one touch on each of two adjacent chunks both stay in fallthrough.
- **`LazyReaderHit_BypassesMissTrackerOnFirstTouch`** — open `.swb` + first touch hits without consulting the tracker. Production with `.swb` loaded skips the gate entirely.
- **`MultisVersion_Bump_TriggersDirtyRebuild`** — updated to reflect the new 3-step flow (Fallthrough → Miss_NotBuilt → Miss_DirtyRebuild).
- Tests that prime chunks via a single `TryGetMask` call (multi-Z, Tier4, lifecycle, parity, BitmapAStar uses-cache) set `MissPromotionThreshold = 1` to opt into eager behavior.
## Expected BDN impact
The Cold column from PR-5's BDN should change as follows once the bench's submodule pointer is updated to this branch:
| # | Scenario | Cold (PR-5) | Cold (PR-6 expected) | FastAStar Cold |
|--:|-----------------|-------------:|---------------------:|---------------:|
| 2 | sewer corridor | 1,627 µs | ~36 µs | 36 µs |
| 4 | causeway | 1,533 µs | ~39 µs | 39 µs |
| 6 | pet 2-tile | 2,364 µs | ~80 µs | 81 µs |
| 8 | npc 5-tile | 3,708 µs | ~140 µs | 141 µs |
| 9 | npc 8-tile | 2,386 µs | ~200 µs | 197 µs |
WarmNoFile and LazyWarm rows should be unchanged — they were always cache-warm. The miss tracker only fires when neither resident chunks nor the lazy reader can satisfy the request.
## Future work (not in this PR)
- **Background-thread bake**: builds outside the game thread so even promoted chunks don't pay the 700 µs build cost on the main thread. Rule 10 (no Task.Run) applies, so this needs careful design — the bake is a pure data transform but main-thread synchronization on chunk-state transitions has to be threaded through. Defer to a follow-up.
- **Long-traverse BDN scenario**: a multi-Find benchmark simulating 50 pet repaths across chunk transitions. Requires restructuring the bench harness; the existing 10-scenario corpus + Cold provider already exercises the gate.
- **Swim sourceZ bake**: scenario 5 (sea serpent) shows 56 B alloc on warm paths because the cache's SourceZ is computed under default-walker rules. Swim creatures fall through to slow path. Independent of this PR.
## Summary
Adds two pieces of pathfinding tooling on top of PR #2448's lazy `.swb` infrastructure:
- **`PathfindRecorder`** — admin-toggled JSONL telemetry capture; one record per `BitmapAStarAlgorithm.Find` call. Output format matches the BDN harness corpus, so production traffic can be captured and replayed in benchmarks without an adapter.
- **Public bake helpers on `StepCache`** — `ComputeLiveTileDataHash`, `TryReadTileDataHashFromFile`, `BakeMap`, `ClearResidentChunks`. Lets the benchmark project (and any future bake utility) drive cache fill + persist without exposing internal types.
The companion BDN harness update lives in [ModernUO-Benchmarks#kb/pathfinding-pr4-bench](https://github.com/modernuo/ModernUO-Benchmarks/tree/kb/pathfinding-pr4-bench): porting `Benchmarks/PathfindInGame/` from the `kb/ai_pathfinding` branch to the API shipped in #2446–#2448.
## What's in this PR
### `PathfindRecorder` (`PathfindRecorder.cs`)
- Holds a single `StreamWriter` open while recording; its internal buffer absorbs per-record writes without per-call `File.AppendAllText`.
- Single `bool` check on the hot path; cheap when disabled.
- Disabling flushes + disposes; an IO failure during write also disables the recorder.
- Server config:
- `pathfinding.recorder.enable` — bool, default `false`. Read on boot via `GetOrUpdateSetting`.
- `pathfinding.recorder.path` — default `<basedir>/Data/Pathfinding/recordings/pathfinds.jsonl`.
- Hooked into `BitmapAStarAlgorithm.Find` — runs once per call, does nothing when disabled.
- Admin command: `[PathRecord [on|off|flush|status]` (default `status`).
### Public cache helpers
- `static ulong StepCache.ComputeLiveTileDataHash()` — wraps the file module's hash function for staleness checks.
- `static bool StepCache.TryReadTileDataHashFromFile(string, out ulong)` — peeks at a `.swb` file's hash field (20 bytes).
- `int StepCache.BakeMap(int, string)` — walks every chunk in the map, populates resident set, saves. Offline / fixture use; blocks for many seconds on a full-map walk.
- `void StepCache.ClearResidentChunks()` — drops chunks + zeros counters but keeps lazy readers open. Lets benchmark loops measure "first query after boot" cost across iterations without the lazy-reader reopen overhead.
## Summary
Adds a binary disk format + lazy reader so the step cache can warm-start from a precomputed file without paying chunk-build cost on the first pathfind through a region. **Resident memory stays bounded by `MaxResidentChunks` regardless of file size** — opening a `.swb` reads only the header + chunk-offset index (~16 bytes per indexed chunk), and individual chunks are seeked + deserialized only when `ResolveMissingChunk` asks for them.
The lazy design (vs. an eager bulk load): a 250 MB bake on a RAM-constrained shard never materializes more than the LRU cap (~40 MB at the default 8192-chunk cap), and unwanted regions never enter memory at all.
Builds on PR #2447.
## What changed
- **`StepCacheFile`** — binary reader/writer module. Writer emits header → chunks (offsets recorded) → index trailer, then patches the header's `IndexOffset` field. Reader is `OpenForLazy(path)` returning a `LazyReader` that holds an open `FileStream` + offset dictionary.
- **`StepCacheFile.LazyReader`** — `TryReadChunk(chunkX, chunkY)` does a single seek + bulk read for one record. `Dispose` releases the underlying stream. Files are opened with `FileShare.Read | FileShare.Delete` so admin tooling can replace them.
- **TileData fingerprint via XxHash3.** The `.swb` header carries a hash of `LandTable + ItemTable` flags. Load rejects any file whose hash doesn't match the running server. Computed via `HashUtility.ComputeHash64` (engine-blessed hasher) — adds a `ReadOnlySpan<byte>` overload alongside the existing `ReadOnlySpan<char>` one for parity.
- **`StepCache.SaveToFile(path, mapId)`** — writes resident chunks for the given map.
- **`StepCache.TryOpenLazyReader(path, mapId)`** — opens the file, validates header, holds the reader for the map's lifetime.
- **`StepCache.ResolveMissingChunk`** — now consults the lazy reader before invoking the runtime baker. A loaded chunk whose `BuiltMultisVersion` doesn't match the live sector falls through to the baker (snapshot was made before a multi was added/removed in that sector).
- **`StepCache.Clear` closes lazy readers.** Test cleanup can delete `.swb` files cleanly.
- **Auto-load at startup.** `PathCacheCommands.Configure()` opens `Data/Pathfinding/<mapId>.swb` as a lazy reader for every map.
- **`[PathCacheSave`** / **`[PathCacheLoad`** — admin commands for the same workflow.
- **`pathfinding.maxResidentChunks` shard-tunable.** Read from `server.cfg` at boot via `ServerConfiguration.GetOrUpdateSetting` (default 8192 ≈ 40 MB). Small shards can tune down; large shards with substantial bakes can tune up to reduce eviction churn. Default is written back to `server.cfg` on first boot, matching the engine pattern used by other settings.
## File layout (v1)
```
Header (48 bytes):
u32 Magic = 0x42575300 ('SWB\0')
u32 Version = 1
u32 MapId
u64 TileDataHash XxHash3 over LandTable + ItemTable flags (HashUtility)
u64 BakeTimestamp informational
u32 ChunkCount
u64 IndexOffset file position where the chunk index begins
Chunk records (fixed size, ~5,393 bytes each, +32 if multi-Z):
u16 ChunkX
u16 ChunkY
u32 BuiltMultisVersion
u8 HasMultiZ
byte WalkMask[256], WetMask[256]
sbyte SourceZ[256], WalkZN..WalkZNW[256], SwimZN..SwimZNW[256]
[byte MultiZCells[32] when HasMultiZ == 1]
Index trailer (16 × ChunkCount bytes):
(u64 chunkKey, u64 fileOffset)
```
## Memory math
| Scenario | Disk file | RAM at boot | Notes |
|---|---|---|---|
| Empty / no `.swb` files | — | 0 | Silent; cache builds on demand. |
| Admin-curated towns (5K chunks) | 25 MB | 0 + per-query | Index ≈ 80 KB. Resident grows to the configured cap under steady-state queries. |
| Full-map bake (50K chunks) | 250 MB | 0 + per-query | Index ≈ 800 KB. Same configured cap. Cold areas never load. |
| All 5 maps fully baked | 1.25 GB | 0 + per-query | Index ≈ 4 MB total. Same configured cap. |
## Hash choice (FNV-1a → XxHash3)
The original draft used inlined FNV-1a-64. Switched to XxHash3 via `HashUtility`:
- ~30× faster on this workload (~30 GB/s SIMD vs ~2 GB/s byte-by-byte). Boot-time only, so absolute saving is microseconds — the real wins are elsewhere.
- Stronger collision resistance and distribution.
- Drops ~25 lines of inlined hash code; matches the rest of the codebase's hashing pattern.
- Hash is stable as long as `HashUtility`'s `xxHash3Seed` constant doesn't change (already marked `// DO NOT CHANGE THIS NUMBER`).
Kamron Batman