## Why
The shard owner, on a Starlink CGNAT address, was blocked by the imported reputation blocklist.
The cause was not CrowdSec. The address was a literal line in `ip-blocklist.txt`, so `BlocklistFilter` denied it at accept and then promoted it — and clearing the CrowdSec decision could not fix it either, because the file entry re-reports within `promoteSuppression` of every reconnect attempt.
This is structural, not a one-off. Reputation feeds list shared consumer address space constantly: on CGNAT one public address fronts many subscribers **at the same time**, so a single abusive customer gets the address listed and everyone else behind it is blocked with them. Where leases rotate, a listing says little about whoever holds the address now. Around 1,000 Starlink addresses sit in the current list.
So exemptions go where they cost nothing, and escalation is driven by what a connection actually does.
## Generator — `tools/Export-IpBlocklist.ps1`
`-AllowlistFile` takes multiple paths, subtracted from the merged set before the output is written. Defaults to every `ip-allowlist*.txt` beside the output, merged into one allow set:
- `ip-allowlist.txt` — operator exemptions, created once and **never rewritten**
- `ip-allowlist-<name>.txt` — a carve-out you built, regenerable and copyable between shards
**Subtraction is range-correct.** An allowlisted address inside a blocked CIDR splits that CIDR around the hole rather than being silently ignored. This also fixes `-ExcludeAnonymizers`, which parsed CIDR entries into `$anonCidr` and then only ever subtracted singles.
**No carve-out ships.** A carve-out names a real network, and which ones a shard should exempt depends on where its players actually are — so publishing one would make that policy call for every shard and put a specific provider's address space in the repo. The script builds them on request instead:
```powershell
.\Export-IpBlocklist.ps1 -AddCarveout starlink -Asn 14593
```
Carve-outs are **discovered, not configured**: every `ip-allowlist*.txt` beside the output is subtracted, by the generator and by the shard, so a file an admin adds needs no config edit and no code change. Each carries an `asn=` marker in its header, which is how `-RefreshCarveouts` rebuilds it without the script keeping a list of anyone's networks; a hand-written allowlist has no marker and is never rewritten.
Prefixes come from **announcements, not ownership records**, because registry data disagrees with what is actually routed and silently caps result sets: ARIN whois returns at most 256 rows and gives per-customer /24s, and `206.83.96.0/19` reads as APNIC in RDAP even though `206.83.96/21` is announced by Starlink.
Editing an allowlist bypasses `-MinInterval`, so a just-added exemption isn't indistinguishable from the allowlist not working. A Starlink carve-out, if you build one, costs **~4,300 IPs + ~144 CIDRs of 4.2M (0.10%)**.
## Allowlists
**`FileAllowlist`** reads the same files the generator subtracts, so an operator entry means "leave this address alone" for real. Subtraction alone only covers being *blocked*; behavioural detections never consult the blocklist, so without this a carve-out was quietly routed around — one scanner behind a shared address was enough to get everyone behind it contributed and firewalled, with nothing in the shard's own config explaining why. Reading the files also means an entry applies on the next reload rather than the next regeneration, which is what matters when someone is complaining now.
**`LoginAllowlist`** is earned by authenticating, with a 90-day TTL because an address that logged in years ago is a stranger. Its own store rather than `Account.LoginIPs`, which has no timestamps and cannot be backfilled. An entry is evidence rather than a licence: 10 suppressed contributions in an hour revokes it, and a fresh login forgives the tally.
Both are consulted **only after the blocklist has already matched**, so a normal accept pays nothing for them and the accept gate stays allowlist-free. `BanExemptions` combines them behind `BanChannel.IsExempt` and suppresses escalation only — every local defence still applies.
Two limits, both deliberate and documented in the class: `LoginAllowlist` **cannot bootstrap** (an entry is only earned by getting in, so it never repairs an existing false positive), and it is weakest on rotating CGNAT. That is why `FileAllowlist` is the fix for those, and why it is manual.
## Behavioural detection
| Reason | Trigger |
|---|---|
| `silent-connect` | Reaped after 5s having sent **zero bytes** |
| `invalid-seed` | Opened with a zero seed |
| `foreign-protocol` | Positively identified as HTTP, TLS or SSH |
**`ForeignProtocol` inverts the test.** Asking "is this a good UO client?" cannot work: `LoginEncryption.ClientDecrypt` is a byte-for-byte stream XOR, so a legitimate client with encryption enabled when the shard expects none sends a structurally perfect connection whose payload is noise. "Speaks HTTP" is safe where "unreadable" is not — however misconfigured a UO client is, it never sends `GET / HTTP/1.1`.
Nothing assumes arrival framing. TCP has no message boundaries, so a rule of the form "these bytes must arrive together" is broken by construction and drops real players on poor links. A prefix match with too few bytes to confirm waits for more. A four-byte seed can legitimately spell `GET ` (the address 71.69.84.32) or `0x16 0x03 0x0?` (22.3.x.x), so confirmation requires the request line to continue in printable ASCII or an actual ClientHello inside a plausible record — a real client's fifth byte is a packet id (`0x80`, `0x91`, `0xEF`), none of them printable, so those collisions fall through.
Everything is keyed on **bytes-received rather than elapsed time**. A connection that sent something and ran out of time is far more likely a slow link than an attack, and banning those produces the worst failure mode available: the player retries, trips the rate limiter, and compounds a bad connection into hours of being firewalled off.
## `AutoDenylist`
A short-lived local hold (15m) on behavioural detections, as `IConnectionFilter` + `IBanReporter` over one store so the engine detection sites never reach into content.
This closes the gap where a flood pays for a socket, buffer and `NetState` slot per connection while waiting for the OS bouncer — the verdicts that matter most are reachable only *after* reading bytes — and it is the entire defence on a shard running no bouncer, which is the default config. Not persisted: a holding pen that survives restarts is a ban without a ban's review.
Cost: one dictionary lookup on a usually-empty dict per accept.
## `BanReasons`
Centralises the reason slugs. `IsBehavioral` is an **opt-in** set, not "everything except manual", so a future reason escalates normally instead of silently inheriting an exemption or entering a local denylist.
This caught a real bug during review: the first cut of the exemption swallowed `manual` admin bans (`Commands.cs`, three sites in `AdminGump`) for any allowlisted address.
## Fixes found in review
- **`BanConfiguration.Settings` was null until `Configure()` ran**, while the reap path dereferences it every `Slice()`. A harness driving `NetState.Slice()` directly hit an NRE that presented as flaky because it depended on whether an earlier test had already called `Configure()` — which is why it failed on some CI platforms and not others. Now starts at the record's defaults, with idempotency tracked by a flag; this also removes the same latent NRE from the pre-existing rate-limit path.
- **`-AllowlistFile` was typed `[string]`** while documented and used as a list, so passing two paths would have collapsed them into one string.
## Layout and docs
Content network code moves out of `Misc/` into `UOContent/Network/`, one concern per folder — `AutoDenylist/`, `Blocklist/`, `CrowdSec/`, `Firewall/`, `LoginAllowlist/`, `Packets/`. **Namespaces are untouched**, so these are pure file moves (git tracks all 16 as renames).
`dev-docs/ip-bans-and-allowlists.md` documents the subsystem, leading with the operator process for unblocking a player — including the three things that look sufficient and are not: deleting the CrowdSec decision alone, editing `ip-blocklist.txt` by hand, and `cscli allowlists` alone. `.gitignore` covers the new config files.
## Testing
Build clean. **Server.Tests 810 passed**, **UOContent.Tests 637 passed**, zero warnings. This branch adds 38 tests; the rest of the delta is main's, since this is rebased on current `main`.
New coverage: TTL boundary and renewal, private-address exclusion, manual-ban-never-exempt, unopted-reason-never-exempt, strike revocation, quiet-window reset, login forgiveness, file-allowlist CIDR coverage, file-allowlist not spending the earned list's strikes, denylist expiry-on-read, cap enforcement, lapsed-entry reclaim, HTTP/TLS/SSH identification, seed-collision fall-through, and encrypted-login-is-not-foreign.
Generator verified end-to-end against live feeds: a clean run ships no carve-out, `-AddCarveout starlink -Asn 14593` fetches and collapses 213 prefixes to 115 ranges in 0.1s over 4.2M entries, `-RefreshCarveouts` rediscovers it by its `asn=` marker, a hand-written allowlist is left untouched, and deleting a carve-out drops it rather than having it rewritten. CIDR splitting verified exhaustively: a single-IP hole in a /24 leaves exactly 255 of 256 addresses blocked.
## Operator note
Existing installs are unaffected until the generator next runs, which creates `ip-allowlist.txt` and nothing else. To unblock someone: add the address to that file and delete any live CrowdSec decision — the existing ban outlives the config change. The shard picks the entry up on its next reload, so re-running the generator is optional.
A shard whose players are on CGNAT (satellite, mobile, or an ISP short on IPv4) will likely also want `-AddCarveout`; see `dev-docs/ip-bans-and-allowlists.md`.
## Also included: a latent CI failure this PR surfaced
`fix(tests): serialize test classes that rent through STArrayPool` touches a property-list test file that has nothing to do with this feature. It is here because it was failing macOS CI, and it is trivially cherry-pickable out if you would rather it went to `main` on its own — **which may be the better call, since it is failing `main` today.**
CI has since gone green with it applied.
`STArrayPool` is single-threaded by design and its bucket cache is a plain `static`, not `[ThreadStatic]`, with a check-then-act initialize in `Return()`:
```csharp
var cacheBuckets = _cacheBuckets ?? InitializeBuckets();
```
Two threads both see null, both initialize, and the loser trips `Debug.Assert(_cacheBuckets is null)`. Anything renting from it has to stay off parallel test threads — which is what the `DisableParallelization` collections are for.
- `ObjectPropertyListReentrancyTests` and `ObjectPropertyListNestedBuildTests` (added in #2555) build property lists, which rent the interpolation buffer, but were not in the sequential collection — unlike `PropertyListInvalidationDuringBuildTests` in the same file. This is a **latent failure already on `main`**; it is timing-dependent, so it shows on some platforms and not others.
- `AutoDenylistTests` (added here) has the same exposure: its cap tests reach `AutoDenylist.Sweep`, which rents a `PooledRefList` without `mt`. The blocklist tests need no marking because `BlocklistSnapshot.Build` asks for the `mt` pool explicitly.
No production change — `STArrayPool` is the right pool on the game loop, where both `Sweep` and the property list actually run.
## Deliberately not included
Waiting for a fragmented four-byte seed at `AwaitingSeed`. It looked like a bug but the disconnect is a deliberate defence: only pre-0xEF clients reach it (0xEF goes through `HandlePacket`, which already waits for its 21 bytes), and waiting converts an instant drop into a full 5s slot hold for a client sending one or two bytes, or a loris dribbling a byte every few seconds. Against a fixed 4096-entry `MaxConnections` table that trades capacity that matters for a fragmentation case a reconnect already fixes.
## The bug
Any property getter reached from `GetProperties` that calls `InvalidateProperties` takes the tooltip build down with it:
```
System.ArgumentNullException: Value cannot be null. (Parameter 'array')
at Server.ObjectPropertyList.AppendStringDirect(String value)
at Server.Mobiles.PlayerMobile.GetProperties(IPropertyList list)
```
`InvalidateProperties` rebuilds **in place** — `Reset()`, then `GetProperties()` again on the same instance — and `Reset()` does two destructive things to a build already in flight:
1. **It returns the pooled interpolation buffer.** The compiler rents it in the handler ctor and returns it in the closing `Add`, so *every hole is evaluated while it is live*:
```csharp
var handler = new InterpolatedStringHandler(1, 2, list); // InitializeInterpolation() RENTS
handler.AppendFormatted(pl.Rank.Title); // <-- getter runs HERE
handler.AppendLiteral("\t");
handler.AppendFormatted(faction.Definition.PropName);
list.Add(1060776, ref handler); // consumes span, RETURNS
```
```
GetProperties(list)
├─ InitializeInterpolation() -> _arrayToReturnToPool = Rent(256) buffer LIVE
├─ « hole 1: pl.Rank.Title »
│ └─ PlayerState.Rank.get (lazy recompute)
│ └─ Invalidate() -> InvalidateProperties() -> m_PropertyList.Reset()
│ └─ Dispose(): Return(buf); _arrayToReturnToPool = null buffer GONE
└─ handler.AppendFormatted("Knight")
└─ _arrayToReturnToPool.AsSpan(_pos..)
└─ ArgumentNullException (Parameter 'array')
```
It surfaces as `ArgumentNullException` rather than `NullReferenceException` because the `Range` overload of `AsSpan` must read `array.Length`, so the BCL null-checks and names the parameter `array`.
2. **It rewinds the packet cursor**, so properties already written are overwritten by the nested pass — a silently corrupted tooltip even where the buffer survives.
## The fix: refuse, don't recover
There is no correct recovery, and retrying the build would only hide the defect. A nested invalidation now logs an error with a stack trace, **throws in `DEBUG`** so it gets found and fixed, and in `RELEASE` returns without touching the list — a possibly stale tooltip, but no crash, no corrupted packet, and nothing leaked back to the pool. Getters that genuinely must invalidate should defer:
```csharp
Timer.DelayCall(InvalidateProperties);
```
The guard flag lives on the `ObjectPropertyList`, not the entity: it is that list's own lifecycle, it costs nothing (both `Item` and `ObjectPropertyList` absorb it in existing padding, and the list is allocated lazily), and it stays correct when builds for different entities nest.
Base instance sizes are unchanged from `main`: Item 128 B, Mobile 792 B, ObjectPropertyList 72 B, PlayerMobile 1216 B.
`PropertyList` also publishes the list into `m_PropertyList` **before** building it rather than assigning through `??=` afterwards, so a nested `InvalidateProperties` sees the build in progress instead of recursing into a second throwaway list whose work is discarded.
`ObjectPropertyList` re-rents its scratch buffer instead of spanning a null array, so a stray `Reset()` from any other caller degrades rather than aborting `GetProperties`.
## Factions `PlayerState`: maintained, not lazily computed
The getter that surfaced this is now a plain field read — the whole `if (m_InvalidateRank)` block and the flag itself are gone:
```csharp
public RankDefinition Rank => m_Rank;
```
`UpdateRank()` recomputes at each point an input actually changes:
| Site | Why |
|---|---|
| `RankIndex` setter | this player's index changed |
| end of `KillPoints` setter | two paths write `m_RankIndex` directly, bypassing the setter; runs once the swap bookkeeping and `ZeroRankOffset` have settled |
| `Faction.AddMember` | *after* the insert — the member count is not settled during the ctor |
| `FactionState` load | once ordering and `ZeroRankOffset` are final |
Supporting fixes this forced out:
- **Both ctors seed the lowest rank.** Nothing recomputes on read any more, so `Rank` has to be usable immediately — including for members that never get a `RankIndex` assigned, which is *every member with no kill points*. Without this, `Rank.Title` NREs.
- **`Rank` always resolves.** Ranks are ordered by `Required` descending ending at `0`, so a *negative* percent (`RankIndex` out of sync with `ZeroRankOffset`) matched nothing and left `m_Rank` null. It no longer divides by a zero `ZeroRankOffset` either.
- **A pre-existing staleness bug.** The `KillPoints` setter writes `m_RankIndex` directly in two places, so the cached rank was never refreshed when a player crossed zero kill points.
All six readers of `Rank` were checked; none relied on the old side effect.
One behaviour change worth flagging: rank refreshes are now **eager** where they used to be lazy, so a `KillPoints` change invalidates each swapped player as it happens. The swap loops break as soon as ordering is satisfied — typically 0–2 swaps — but it is on the path that runs on every faction kill.
## Documentation
The rule is written down so it is enforceable rather than folklore:
- **CLAUDE.md** audit rule 19
- **`dev-docs/property-lists.md`** — new "Never Invalidate From Inside `GetProperties`" section with the failing/passing pattern
- **`dev-docs/claude-skills/modernuo-property-lists.md`** — key rule + anti-pattern
- **`dev-docs/claude-skills/modernuo-code-audit.md`** — rule 19, ERROR severity
## Tests
- `ObjectPropertyListReentrancyTests` — `Reset()` and `Dispose()` re-entered mid-hole (both red against `main` with the exact exception above), nesting behaviour, and the new contract: `DEBUG` throws, `RELEASE` survives, and the build is never retried into a loop.
- `FactionRankTests` — `Rank` is populated before anything reads it, tracks `RankIndex` without a read, is stable across reads, and still resolves when `RankIndex` is out of sync with `ZeroRankOffset`. Red-verified: removing the ctor seed fails the first one.
793/793 `Server.Tests` and 608/608 `UOContent.Tests` pass.
## Noted, not addressed here
`~ObjectPropertyList()` returns the rented array to `STArrayPool<char>.Shared` from the **finalizer thread**, and that pool is single-threaded by design. Left alone as a separate concern.
## Problem
Every map's `.swb` step cache was opened, indexed and logged **twice** on boot.
`MovementPath.Configure()` explicitly called `PathCacheCommands.Configure()` and `CacheEvictionTimer.Configure()`. Both are types exposing a public static parameterless `Configure()`, which `AssemblyHandler.Invoke("Configure")` already discovers and calls once each (`AssemblyHandler.cs:157`). So `PathCacheCommands.Configure()` ran twice, and `AutoLoadAtStartup()` with it. `PathCacheCommands.Configure()` called `PathfindRecorder.Configure()` the same way.
`TryOpenLazyReader` disposes the prior reader before replacing it, so there was no handle leak — but the header and full chunk index of each `.swb` were read twice (~48 MB of files across six facets). The expensive `.mul` hashing was already memoized, so it was not doubled.
## Fix
Consolidate the cache lifecycle into `Initialize`:
- `Configure()` keeps only settings and command registration.
- `Initialize()` opens the readers once, then prebakes only maps that still lack one.
- The post-bake reopen is per-map instead of a blanket `AutoLoadAtStartup()` — on a partial bake (some valid `.swb`, one stale) that would close and reopen the readers already open, a second double-open on a different path.
`Initialize` is the correct phase. `Configure` runs before `TileMatrixLoader.LoadTileMatrix()` and `World.Load()` (`Main.cs:458/460/463/465`), so opening a `.swb` there forced the lazy `Map.Tiles` property — the fingerprint hashes the map files — and built every `TileMatrix` ahead of the loader that owns it, possibly before `TileMatrix.Configure()` settled `Pre6000ClientSupport`. Both sit at the default call priority and the phase sort is unstable. Moving pathfinding out leaves nothing in `Configure` that touches `Map.Tiles`, closing that hazard; the other 22 `.Tiles` users in UOContent are all runtime paths.
Multis stay out of the bake by design — houses and boats are player data that moves, handled by the multi-aware path at query time.
## Logging
The per-map `StepCache: opened ... chunks indexed` line drops to `Debug`. Opening is the expected case; `BakeMap` already logs a rebuild at `Information`, and `Initialize` still emits `PathBake: pre-bake complete (N map(s) written)`.
## Verification
- `dotnet build Projects/UOContent` — 0 errors, 0 warnings.
- `dotnet test --filter FullyQualifiedName~Pathfinding` — **123 passed, 0 failed**.
Boot logs should now show one `opened` line per map at `Debug`, none at `Information`.
Reshapes IP banning around one idea: **core owns the question, content owns every answer.**
Core gains a single accept-path seam — `IConnectionFilter` — and loses everything that used to implement one. The firewall moves to UOContent, a new file-backed blocklist joins it there, and CrowdSec is repositioned from an in-app enforcer to a contribute-first reporter.
## The seam
```csharp
public interface IConnectionFilter
{
string Name { get; }
void Configure();
void Start(CancellationToken token);
void Stop();
bool ShouldDeny(IPAddress address);
}
```
The accept path went from hardcoded branches to one question:
```csharp
else if (ConnectionFilters.ShouldDeny(remoteIP, out var deniedBy))
{
logger.Debug("{Address} denied by connection filter '{Filter}'", remoteIP, deniedBy);
}
```
Filters register during the Configure sweep. The registry is a plain array walked by an indexed loop — no enumerator, no closure, no allocation — and the first denial short-circuits. An interface dispatch is noise next to the `accept()` syscall, so pluggability costs nothing measurable on the path that has to survive a DDoS.
Whatever a hit implies — persisting, promoting to an OS bouncer, contributing to the ban channel — is the filter's business, not the accept path's.
A filter that throws is **unregistered and the connection fails open**. A filter that faults once faults for every subsequent connection, so leaving it registered means an exception and a log line per accept — exactly the amplification an attacker wants — and a broken filter must not be able to deny everyone either.
This deliberately does **not** reuse `EventSink.InvokeSocketConnect`: that fires later and allocates a `SocketConnectEventArgs` per connection, which is what the accept path avoids for rejected traffic.
## What ships behind it
**`firewall`** (UOContent) — the existing admin-curated set. Collapsed from `Firewall` + `AdminFirewall` + a threaded enforcer into one single-threaded store with **zero concurrency primitives**: the accept path, admin gump, TTL expiry and boot load all run on the game loop. Persists to `Configuration/firewall.json` with automatic migration from the legacy `firewall.cfg`. No behavior change for operators — same namespace, same gump, same commands.
**`blocklist`** (UOContent) — new. Holds a millions-strong list in-app and **demand-pages** hits up to CrowdSec, which promotes them to the OS firewall.
The motivation is concrete: CrowdSec's Windows bouncer cannot load the ~3.9M IPs that 91 community feeds produce, but it handles ~100k fine. So the millions live in-process behind a binary search, and only addresses that *actually connect* get promoted. A `PromotedGuard` suppresses re-reporting an address until the bouncer picks it up.
The list is parsed straight from UTF-8 file bytes with no per-line string allocation, off the game loop, and published as an immutable snapshot swapped through a single `volatile` reference. Reloads yield to world saves.
**`tools/Export-IpBlocklist.ps1`** — the producer. Requires PowerShell 7 and runs on Windows, Linux and macOS; Windows PowerShell 5.1 is refused up front via `#requires`. Merges a thin, non-overlapping feed set into one de-duplicated, bogon-filtered file. Parsing runs in a compiled `Add-Type` hot loop (~1s for ~4M lines instead of minutes). Written to a `.tmp` sibling and swapped with `File.Replace`, so the shard never reads a half-written list, and a total feed outage refuses to overwrite a good list with an empty one. Re-running is idempotent — it exits without downloading anything while the list on disk is younger than `-MinInterval` (default 2h, the anchor feed's own refresh period), so a misconfigured scheduler can't hammer upstream.
## CrowdSec: contribute-first
`IBanReporter` + `BanChannel` fan locally-decided bans out to external systems. `CrowdSecReporter` (UOContent) posts to LAPI `POST /v1/alerts` and retracts via `DELETE /v1/decisions`.
Reporting is **enqueue-only** on the accept path: a bounded, coalescing channel drained off-loop with bounded retry, counted drops on overflow, and a flush on shutdown. Under a DDoS the accept path never does synchronous or lock-contending per-IP work.
### Why not pull decisions from CrowdSec?
The original design streamed decisions into an in-app snapshot and enforced them at the accept gate. That's the wrong layer: by the time the shard sees the connection, the TCP handshake and socket setup are already paid for. `cs-firewall-bouncer` drops the same traffic **at the kernel**, and it's what CrowdSec is built to do. So the shard now contributes what it uniquely knows (rate-limit trips, blocklist hits from real connection attempts) and lets the OS enforce.
The one thing the OS can't do — hold millions of entries on Windows — is exactly what the in-app blocklist covers, and it feeds the same pipeline.
## Threading policy
`CLAUDE.md` rule #3 is rewritten as an explicit three-part policy, with rule #10 restated in tandem:
- Anything touching game state runs **only** on the main loop.
- Heavy work that *needs* game state must be **chunked** across ticks, never threaded.
- Heavy work that does *not* need game state (large-file parse, external I/O) **must** run off-loop **and must yield to world saves**.
Results come back via an immutable snapshot swapped through a single `volatile` reference, or `Core.LoopContext.Post` — never by letting the scheduler decide where heavy work runs. Both new subsystems follow it.
## Shared primitives
`SortedRangeIndex<T> where T : IBinaryInteger<T>` — coalesced disjoint interval arrays plus a binary search. The firewall, the blocklist, and (as of this PR) core's reserved-network tables all use it.
Coalescing is a correctness requirement, not an optimization: multi-feed lists nest CIDRs (`/24` containing a `/32`), and a search that inspects only the rightmost run whose minimum is ≤ the value is sound **only** over disjoint runs. That bug was caught in review and is covered by regression tests.
`IPAddressUtility` collects the allocation-free `IPAddress` ↔ `UInt128` conversions and CIDR parsing that were previously scattered or duplicated.
## Config
| File | Owner | Keys |
|---|---|---|
| `Configuration/bans.json` | core | `reportRateLimitTrips`, `autoBanDuration` |
| `Configuration/blocklist.json` | content | `file`, `reloadInterval`, `reportHits`, `banDuration`, `promoteSuppression` |
| `Configuration/crowdsec.json` | content | `lapiUrl`, `machineId`, `password`, `origin`, `manualBanDuration`, `flushInterval`, `maxQueue` |
| `Configuration/firewall.json` | content | persisted firewall entries (migrated from `firewall.cfg`) |
Everything is inert by default. CrowdSec self-disables without credentials; the blocklist self-disables until its file exists. A shard that changes nothing sees no behavior change.
## Notes for review
- **Core no longer references `Firewall` or `IFirewallEntry` anywhere.** `NetworkUtilities` used to build its reserved-network tables out of `CidrFirewallEntry`, which coupled core to the firewall for something unrelated to banning; those are now a `SortedRangeIndex<UInt128>`, same semantics and public API.
- **`BanChannel.Stop()` no longer persists the firewall** — a contribution coordinator has no business saving an enforcement store. That's the firewall filter's `Stop()`.
- **A dead `whitelisted` parameter was dropped** from the blocklist gate: it was hardcoded `false` at its only call site, and no whitelist concept exists in core.
- **The blocklist filter is an instance, not a static.** The static version forced its tests onto the sequential collection with a reset hook; they now run in parallel.
- `dev-docs/networking-packets.md` documents the seam for content authors, plus a known wart in the `IPAddress` ↔ `UInt128` normalization flagged for a follow-up PR.
- The generator was verified on Linux, macOS and Windows under a temporary CI matrix (since removed). It caught two portability bugs — a Windows-only path separator, and a culture-sensitive duration parse that read `2.5` as `25` on comma-decimal locales and *silently* turned a 2.5h cooldown into 25h — plus a third that made the script unparseable on Windows PowerShell 5.1. The source is ASCII-only for that last reason: `#requires` is only honored once a file parses, so non-ASCII in a BOM-less script produces parse errors instead of the version message.
## Tests
**1344 pass** (782 `Server.Tests`, 562 `UOContent.Tests`). New coverage: filter registry (registration, short-circuit, fault-disable), blocklist parsing/CIDR/coalescing, snapshot reload markers, promote-guard TTL, ban-channel fan-out, CrowdSec alert building/dedup/flush-on-stop, and the generator's output-format contract pinned against the reader.
## Summary
Hardens the **Advanced Search** engine (`Projects/UOContent/Engines/Advanced Search/`) — the GM entity finder that fans searches across background worker threads. A code review surfaced 14 defects (A–N), including a shard-crasher reachable from a single admin typo and a path that silently disables autosave for the rest of the shard's uptime. Each behavioral fix ships with a test.
Full `UOContent.Tests` suite: **530/530 green** (21 new AdvancedSearch tests).
## Fixes
### Crash / data-loss
- **A — Shard crash on a malformed Property Test.** `AdvancedSearchThreadWorker.Execute` had no `try/catch` and the worker `Thread` is foreground, so a parse throw (`Hits>abc`, `Layer=onehanded` — `Enum.Parse` was case-sensitive, `Hits>1@` — empty sub-expression indexing) terminated the process. Now: `ParseValue`/`CompareValues` use `TryParse`/`Enum.TryParse(ignoreCase)` and return no-match instead of throwing; the per-entity filter is wrapped in `try/catch` (logs + skips); empty expressions are guarded.
- **C — Overlapping searches corrupt state + brick autosave.** `_threadWorkers`/`_threadId` were `static` but `DoSearch` is an instance method; a second search (double-click / two admins) stomped shared worker state and could leave a drain waiting forever on the shared `AutoResetEvent`, so `AutoSave.SavesEnabled` was never restored. Now: an `Interlocked` re-entrancy guard rejects concurrent searches.
- **G — Autosave restore not guaranteed.** The restore lived only in the success callback. Now it's in a `finally` (plus an outer `catch` covering the synchronous setup and a `catch` on the drain body), so autosave + the guard are always released.
### Wrong results
- **D — `@`/`|` operator precedence.** `a@b|c` evaluated as `a && (b || c)` instead of `(a && b) || c`. OR now binds looser than AND (`AdvancedSearchUtilities.EvaluateBoolean`, unit-tested).
- **E — Descending sort, partial last page rendered blank** (the index decreased in descending mode and the `break` early-out killed the loop). Now a bounded `VisibleCount`-driven loop renders the last page in both directions.
- **F — Deleted entities** were not skipped (ghost rows). Now `DoEntitySearch` skips `entity.Deleted`.
- **N — Reference-type comparisons** threw (`Comparer<T>.Default.Compare` on non-`IComparable`) and compared references to a string. Now equality is by value and ordering is guarded to `IComparable` (no throw).
### Worker perf / hardening
- **H** busy-spin → `Thread.Yield()` in the drain; **I** `GetProperties()` cached per `Type`; **J** `HandleValidInternal` moved behind the cheap map/range/region filters; **K** worker threads are `IsBackground` + `Exit()` tolerates an already-terminated worker; **L** `_filter == null` guard; **M** consistent `Volatile` access on `_pause`/`_exit`.
### Documented
- **B** — the residual worker/event-loop read race is documented on `AdvancedSearchThreadWorker`: workers read live entity state concurrently with the loop, so value-type reads may be stale-but-safe and getter exceptions are swallowed; fully eliminating it would require snapshotting entity fields on the main thread (deferred).
## Notes
- New test-only seams (`TryBeginSearch`/`EndSearch`/`IsSearchInProgress`/`VisibleCount`/`TryParseValue`/`EvaluateBoolean`) are `internal` via the existing `InternalsVisibleTo("UOContent.Tests")`.
- Dead `public ParseValue<T>` removed.
- `ConcurrentDictionary` for the reflection cache is intentional — these workers are genuinely parallel.
## At a glance
```csharp
public override void GetProperties(IPropertyList list)
{
base.GetProperties(list);
// Accumulate any number of free-text lines. On dispose the block flushes via
// AddChunked, splitting across as many OPL properties as needed so none can
// overflow the legacy 2D client's per-property buffer (which would crash it).
using var block = list.TextBlock();
if (luck > 0)
{
block.Add($"Luck Bonus: +{luck}%"); // zero-alloc interpolation
}
block.Add("Cannot be repaired".AsSpan()); // plain text, no string allocation
// Already holding a '\n'-joined string? Skip the builder and chunk directly:
// list.AddChunked(description);
}
```
## What
Adds a safe path for emitting **variable-length, free-form (non-cliloc) tooltip text**:
- **`ObjectPropertyList.Add(ReadOnlySpan<char>)`** overloads — append raw text with no string allocation. Makes the old single-arg `Add(string)` redundant (a `string` binds to the span overload implicitly), so it's dropped.
- **`AddChunked(ReadOnlySpan<char>)`** on `IPropertyList` — splits newline-joined text at `\n` boundaries across as many passthrough-cliloc properties as needed, so no single property exceeds the cap.
- **`OplTextBlock`** (`ref struct`) + **`IPropertyList.TextBlock()`** — an ergonomic builder that accumulates `\n`-joined lines (with a zero-alloc interpolated `Add($"...")` overload) and flushes via `AddChunked` on dispose. Usage: `using var block = list.TextBlock();`.
- **`MaxArgumentLength` (504)** — per-property cap with a hard backstop that clamps + logs anything that slips through.
## Why
The legacy 2D client copies each OPL property's text into a fixed ~512-char (1024-byte) buffer. A single property longer than that smashes an adjacent world object's vtable on the client heap and crashes the client. `AddChunked`/`OplTextBlock` keep multi-line content safely under the cap instead of risking one oversized `Add`.
## Docs
- `dev-docs/property-lists.md` — new "Multi-Line Free Text" deep-dive section; corrected the stale `IPropertyList` listing.
- `dev-docs/claude-skills/modernuo-property-lists.md` — condensed pattern + anti-pattern.
## Tests
9 tests pass (`OplTextBlockTests`, `ObjectPropertyListSpanAddTests`): line joining, empty-line skipping, no-line no-op, zero-alloc interpolation, and long-content chunking staying under `MaxArgumentLength`. Full `UOContent` build is green, confirming dropping `Add(string)` breaks no call sites.
## Summary
Fixes the pathfinding step-cache (`.swb`) prebake so it bakes **once** and skips when a valid cache already exists, instead of re-baking on every boot. The root cause was the staleness fingerprint hashing mutable in-memory tile data rather than the on-disk files. This PR makes the fingerprint a pure function of the client data files and separates dynamic multis (houses/boats) from the static cache.
> This branch builds on the `ConfigurePrompts` first-boot-prompt unification (commit `5df8d0bd`, also included here) — that commit accounts for the `ServerConfiguration.cs` and `dev-docs/server-lifecycle.md` changes in the diff.
## The bug
With `pathfinding.prebakeMaps` set, the cache re-baked on **every** boot. The `.swb` staleness fingerprint hashed the live `TileData.LandTable`/`ItemTable` flags, which the server patches at runtime (`ItemFixes`, `LOSBlocker`, `PotionKeg`, `CTF`) at nondeterministic lifecycle points (Initialize-phase methods share a priority; static ctors fire lazily). So a fingerprint stamped at runtime (`[PathBake`) never matched the one recomputed during startup `Initialize()`, and the cache rebaked every time.
## Changes
**1. Fingerprint the files, not the in-memory tables** (`fix`)
Hash `tiledata.mul` (cached, computed once) plus the per-map `.mul`/`.uop` files — never the runtime-mutated `TileData` tables. The fingerprint is now lifecycle-stable. Existing `.swb` files rebake once after deploy, then stay stable.
**2. Compute the fingerprint once per boot** (`refactor`)
`Configure()`'s `AutoLoadAtStartup()` already opens and fingerprint-validates a reader for every up-to-date `.swb`. `Initialize()` now skips baking any map that already has an open reader (`StepCache.HasLazyReader`) instead of recomputing the fingerprint a second time.
**3. Bake static-only; route multis to the live path** (`refactor`)
Multis (houses/boats) are dynamic, so they're no longer baked into the static chunk cache — they were tagged with `BuiltMultisVersion`, a non-persisted session counter, which made persisting them unsafe (false matches / wasted re-bakes).
- Chunks bake land + `statics.mul` only.
- At query time, any cell whose sector (or its 1-cell halo) contains a multi routes to `Fallthrough_Multi` → the existing live, multi-aware `CheckMovement` path. The halo prevents a cell proposing a walkable edge into a neighbouring wall; interior (multi-free) cells pay one sector lookup.
- Adds `Sector.HasMultis` (one engine accessor); `.swb` format → v9 (rejects old multi-baked files); new `Fallthrough_Multi` telemetry.
- Behaviour-preserving: multis use the same live path the engine used before the cache existed.
**4. Comment polish** (`style`) — no behaviour change.
## Testing
All green: **92** pathfinding (incl. a new fingerprint-stability test and a multi-halo fallthrough test), **423** UOContent, **708** Server.
## Follow-ups (not in this PR)
- **Background bake worker** — make `[PathBake` and the boot prebake non-blocking (game thread serves tile reads to an off-thread worker).
- **Per-multi MCL cache** — cache walkability in each multi's own frame (keyed by multiID, movement-invariant) so houses/boats get a fast path instead of the live fallback.
- **House-pathfinding equivalence tests** — the one area not yet covered by a dedicated automated test; multi pathing is currently correct by delegation to the live path.
Stacked on #2475 (the `ConfigurePrompts` phase). Base will switch to `main` once #2475 merges.
## What
Move the engine's own first-boot prompts — data directories, listeners, server name, expansion + map selection — out of `ServerConfiguration.Load` and into **`ServerConfiguration.ConfigurePrompts()`** (`[CallPriority(0)]`), so **all** first-boot prompting (engine and content) runs through the single `AssemblyHandler.Invoke("ConfigurePrompts")` phase. `Load` now only reads/creates the config file.
## Why it's safe
- **Assembly loading uses `AssemblyDirectories` (default `./Assemblies`), not `DataDirectories`** — so assemblies load fine before the now-later data-dir prompt. This is the linchpin that makes the move possible.
- **`UOClient.Load()`** (client-file discovery via `Core.FindDataFile`) needs `DataDirectories`, so it moved *with* the data-dir prompt into `ConfigurePrompts`.
- **`Core.Expansion`** is now assigned in `ConfigurePrompts` (every non-mocked boot). Nothing between `LoadAssemblies` and that phase reads it — type initializers run lazily on first use, not during `LoadAssemblies`.
- **`[CallPriority(0)]`** keeps the engine prompts (including map selection) ahead of content prompts such as the pathfinding pre-bake (priority 50), preserving "after map selection".
- `Main.cs` already invokes the phase — **no startup-ordering edit** here.
## Tests
`Server.Tests` **708/708**, `UOContent.Tests` **418/418**, build clean. Fixtures are unaffected: they call `Load(true)` (now just reads config) and set expansion/data dirs directly; `ConfigurePrompts` is gated on `m_Mocked`.
## ⚠️ Needs first-boot runtime verification
`Main.cs` startup ordering is **not** covered by the fixture-based suite (the fixtures bypass `Main`). Please boot once with a fresh `modernuo.json` to confirm the first-boot prompt sequence (data dirs → … → expansion/maps → pathfinding pre-bake) and that `Core.Expansion` resolves correctly. Docs updated in `dev-docs/server-lifecycle.md`.
## Summary
Adds authentic **T2A-era (pre-UO:Third-Dawn) packet-based crafting menus**, enabled via the **`t2aCraftMenus` server setting** (read once at startup; default **`!Core.UOTD`**, so a pre-UO:TD shard gets them automatically). When enabled, double-clicking a crafting tool opens the classic `0x7C`/`0x7D` item-list menu — skill- and material-filtered — instead of the modern gump, covering all 8 tool/skill crafts (blacksmithy, tailoring, tinkering, carpentry, alchemy, bowcraft/fletching, inscription, cartography). It is **not** a runtime/admin-flippable feature flag.
This is the **definitive, reconciled** branch and **supersedes**:
- **#2181** (Delphi — `T2A_CraftingMenus`): the original effort.
- **#2381** (Jack/UOLL — `t2a_crafting_menus`): the research-grounded superset (Delphi's base + 12 corrections), rebased onto current `main`.
Original authorship is preserved across the cherry-picked history: foundation commit **@Delphi79**, mechanic fixes **@jackuoll (Jack Ward)**, reconciliation/fixes/docs mine.
## How it was built
1. Cherry-picked Jack's 13 commits onto current `main` (superset of Delphi's; only 2 trivial FeatureFlags conflicts).
2. Applied targeted fixes (below) with tests.
3. Full convention audit, build, and test pass.
Grounded in independent historical research plus Jack's deep dive. Maintainer reference: `dev-docs/t2a-crafting.md`.
## Mechanics (highlights)
- Double-click tool → target resource → skill/material-filtered menu → craft. Resource pre-selection per skill; make-last by targeting the tool.
- **Stacked-gem jewelry:** target a gem stack → the **full stack** is consumed and the piece is named by count ("a 1000 diamond ring"); count persists (`BaseJewel` serialization **v4 → v5**, new `_gemCount`).
- **Tool-less inscription & cartography** (skill-list invoked; no pen/sextant); inscription consumes reagents+scroll on success and failure, mana only on success.
- **Tailoring matching-hue consumption:** targeting hued cloth/leather consumes only that hue. Crafted items take color from their **`CraftResource`** (not the dyed hue), so dyed leather/cloth don't tint the product; in T2A only colored ingots/ore color items (metal armor/shields).
- **Half-resources on failed non-scroll crafts** (pre-UO:TD).
- **Maker's mark** always prompted for exceptional items, via the shared `QueryMakersMarkGump`.
- Server-side menu infra changes are additive (`ItemListEntry.CraftIndex`, `Entries` setter, `HasSent`).
## Notable changes on top of the cherry-pick
- **Toggle is a startup server setting, not a feature flag.** Removed `ContentFeatureFlags.T2ACraftMenus` (and its admin-flippable plumbing); the value is read once via `ServerConfiguration.GetSetting("t2aCraftMenus", !Core.UOTD)` into `T2ACraftSystem.Enabled`. Since the default tracks the era and it can't be flipped at runtime, there's no incoherent "menus-on / UO:TD-era" state.
- **Stacked-gem consumption (B3a/B3):** consume the full `PendingGemCount` (was deliberately consuming 1 while naming by the stack), null-safe gem type, plain-piece fallback + message. New `T2AJewelGemCraftTests`.
- **Convention audit:** `new List<Item>()` → `PooledRefList<Item>` on the hue-aware consume path; removed dead code.
## Decisions & deviations
- `make-last` kept as **QoL** (post-T2A gump-era feature).
- `half-on-failure` (non-scroll) kept as a **reconstruction** (not OSI-confirmed).
- **Stacked-gem** behavior set per shard authority (overrides the "single gem" reconstruction).
- **Cooking** out of scope (no T2A crafting menu existed for it).
- **No colored items from dyed materials:** crafted color comes from the `CraftResource` type. Pre-AOS leather has no colored variant, so leather is always uncolored; weapons retain resource color only in AOS+ (unchanged, intended).
## Test plan
- Automated: `dotnet build ModernUO.slnx -c Debug` clean; `dotnet test Projects/UOContent.Tests` → **421 passed** (incl. 3 new jewelry tests).
- Manual (needs a running T2A shard + client):
- [ ] Each of the 8 skills opens the correct menu; empty-menu guard fires.
- [ ] Make-last repeats the last craft (jewelry re-prompts gem).
- [ ] Jewelry consumes the full targeted gem stack and names by count.
- [ ] Cartography consumes blank maps only with T2A enabled / maps+scrolls when disabled.
- [ ] Tailoring consumes only the targeted-hue material; crafted items are not tinted by dyed cloth/leather.
- [ ] Maker's-mark prompt on exceptional.
- [ ] Failed non-scroll craft consumes half resources.
- [ ] Inscription: reagents+scroll on success/failure, mana only on success.
- [ ] T2A disabled: gump crafting unchanged.
## Credits
Co-authored-by: @Delphi79
Co-authored-by: @jackuoll
## What
On **first boot** (right after map selection), offer to pre-bake the pathfinding `.swb` cache for the selected maps. This removes first-pathfind-after-boot latency and is now cheap — ~18 MB/facet after the v8 format work (the old ~565 MB is gone). The answer persists in `modernuo.json` as **`pathfinding.prebakeMaps`** (default **false**): asked exactly once, and skipped on headless/CI boots (redirected input) where operators can set the flag directly.
## How — a generic startup phase, not pathfinding hardcoded in the engine
The clean-console (pre-Serilog) prompt window is inside the engine startup, but UOContent isn't loaded until after `ServerConfiguration.Load`. So rather than coupling the engine to pathfinding, this adds a generic lifecycle phase:
- **`Main.cs`**: new `AssemblyHandler.Invoke("ConfigurePrompts")` — runs **after** `LoadAssemblies` (so content can participate) but **before** the first `logger.Information` (so console prompts aren't interleaved with the async console sink). The first log line moves below it. Any class can hook in with `public static void ConfigurePrompts()` and self-gate on first-boot state. No `ServerConfiguration` or pathfinding coupling added to the engine.
- **`PathCacheCommands.ConfigurePrompts()`**: the first-boot prompt (interactive-only, flag-absent-only); persists the answer.
- **`PathCacheCommands.Initialize()`** (`Invoke("Initialize")` phase, after the tile matrix loads — which the bake walks): when the flag is set, bakes any map whose `.swb` is **missing or stale** (tile-data fingerprint mismatch, via `StepCache.ComputeLiveFingerprint` / `TryReadFingerprintFromFile`). A fresh cache is a no-op, so only the first boot — or a post-client-update boot — pays the several-minute cost.
## Docs
Fixed the now-stale "~565 MB / ~1.5–2 GB / do not bake by default" section in `dev-docs/pathfinding.md` (it's 17.9 MB for Trammel, tens of MB for all six facets after v8), added a "First-boot pre-bake prompt" section, and added the `pathfinding.prebakeMaps` lever row.
## Verified
- `dotnet build UOContent -c Release` → 0 errors (rebased on #2474).
- Pathfinding/StepCache tests: **90/90 pass**.
- Bootstrap streamlining of the startup phases is intentionally left as a follow-up.
## Summary
Phase #3b (final roadmap item), stacked on #2470. Compacts the index trailer from 20 to 8 bytes/chunk.
Trammel: 19.2 MB → 17.9 MB. Roadmap total: 565 MB → 17.9 MB (−96.8%).
## Details
- Trailer stores `{ u32 packedKey = (ChunkX << 16) | ChunkY, u32 recordLength }` per chunk, in record write order; the file offset is dropped and reconstructed by cumulative recordLength from HeaderSize.
- No record reordering, no varint; fixed-stride, TryReadChunk unchanged.
- Also simplifies the accumulated `.swb` code comments across the stack.
- Format v8; v7 files rejected and re-baked once.
## Tests
v8 multi-chunk round-trip (cumulative offset reconstruction) + the v6/v7 suite; full pathfinding suite green; Release build clean.
## Summary
Phase #3a, stacked on #2469. Compresses each chunk record independently with libdeflate (random access preserved).
Trammel: 124.7 MB → 19.2 MB (−85%).
## Details
- Whole-record framing `[u32 UncompressedLen][payload]`; records that don't shrink (tiny Uniform) are stored raw, detected as payload length == UncompressedLen.
- Codec chosen by full-Trammel spike: libdeflate VeryHigh (16.5 MB, 1.83 µs/chunk decompress) over zstd L19/22 (17.4 MB) and managed Brotli q11 (16.4 MB) — best native ratio, fastest decompress, already the repo's packet codec (no new dependency).
- Reuses cached thread-static bindings: `Deflate.Maximum` for bake, `Deflate.Standard` for reads.
- Compression is bake-time only; decompression is one-time per chunk (LRU-cached).
- Format v7; v6 files rejected and re-baked once.
## Tests
v7 unit tests + the v6 suite run through the compression path; full pathfinding suite green; Release build clean.
## Summary
Phase #2 of the `.swb` step-cache size-reduction roadmap (after #2465, v5 uniform elision). Stores the 16 base directional Z arrays as masked residuals against each cell's own SourceZ and omits any array that matches its prediction. Lossless, byte-identical reconstruction.
Trammel: 231.9 MB → 124.7 MB (−46%).
## Details
- Predictor: `predict = mask bit ? SourceZ : 0` (matches the baker's 0 on unwalkable directions); residual `Z − predict` via unchecked two's-complement (byte-exact for all inputs); reconstruct `Z = predict + residual`.
- A `u16 ZArrayMask` flags which of the 16 base arrays differ from prediction; matching arrays are omitted and synthesized from mask + SourceZ at read.
- Serializer-layer only: StepChunk, the cache, the algorithm, and the baker are unchanged.
- Format v6; v5 files rejected and re-baked once.
## Tests
21 v6 unit tests; full pathfinding suite green; Release build clean.
## Summary
Sub-project #1 of the `.swb` step-cache size-reduction roadmap (`dev-docs/pathfinding.md` § Future work). Adds **uniform-chunk elision** to the `StepCacheFile` format, bumping it **v4 → v5**.
A fully-uniform 16×16 chunk — no strata, **no swim layer**, all 19 base arrays constant (open ocean, Green Acres, void) — serializes to a **~28-byte record** (`KindUniform`) instead of ~5,393, and reconstructs **byte-identically** via `Array.Fill`. Non-uniform chunks use the existing v4 body (`KindFull`) with the swim-layer and strata trailers **fully preserved** — the Kind byte is just prepended.
## Calibrated result (measured, not projected)
Baked Trammel via `SaveToFile`:
| | |
|---|---:|
| Chunks | 114,688 |
| Uniform (swim-aware) → elided | 62.7% |
| Swim-layer chunks (stay Full) | 8.9% |
| Strata chunks (stay Full) | 1.8% |
| Baseline (full records) | 592.2 MB |
| **Actual v5 `.swb`** | **231.9 MB (−61%)** |
The residual is ~150 MB of non-uniform land Z-blocks (targeted by #2 predictive-Z) + ~81 MB of swim-layer trailers (#2/#3). #2 and #3 are separate follow-up PRs.
## Implementation
- `StepChunk.IsUniform()` — false if it has strata **or a swim layer**, else true only when all 19 base arrays are constant (the "all-same" check uses the SIMD-accelerated `ContainsAnyExcept`).
- `StepCacheFile` v5 — `Kind` byte (`KindFull=0`/`KindUniform=2`, 1 reserved); uniform write/read; `FormatVersion`/`MinSupportedVersion` → 5 (v4 files rejected on open and re-baked). No `StepCache`/algorithm/index changes; fingerprint logic untouched.
## Tests
7 `StepCacheFileV5Tests` (uniform round-trip + `<200 B` compactness, varied-full, swim-layer-full, strata-full, swim+strata combined, v4 version-gate rejection) + the existing StepCache/pathfinding suite — **70 pass**, including the prior `SwimLayer_RoundTrips`. An independent review verified write/read symmetry, cast round-tripping, swim/strata preservation, and the version gate (READY TO MERGE).
## Summary
Adds `dev-docs/pathfinding.md` — a reference for how creature pathfinding works in ModernUO, written so a future contributor (human or AI) can reason about it without re-deriving it from the code.
Covers:
- **The stack** end to end: `ApproachTarget` → `PathFollower` → `MovementPath` → `BitmapAStarAlgorithm` → `StepCache` → `MovementImpl` slow path (and that the removed FastAStar survives as the slow path).
- **Windowed-A* limits** (`AreaSize=38`, `MaxSearchNodes`, Z planes) and what they mean (2D-adjacent-but-obstacle-separated / a-floor-up goals are unsolvable by design).
- **StepCache**: second-touch warming, LRU-bounded memory, lazy `.swb` backing stores — with **measured** disk sizes (~565 MB/Trammel; ~1.5–2 GB all facets).
- **Four config levers** in a table: `pathfinding.enable`, `bitmap_pathfinding_cache`, `pathfinding.maxResidentChunks`, `pathfinding.maxSearchNodes`.
- **Small/crappy-hardware shard spectrum** (cache off ≈ FastAStar at ~1× with zero warming memory, up through baked `.swb`).
- **Diagnostics & tooling** (`[PathCacheStats`/`[PathRecord`/`[PathBake`, the MapDump tool, the benchmark suite) and the Debug/Release test note.
- **Future work**: background-thread bake, long-traverse BDN scenario, swim `SourceZ` bake, and the `.swb` size-reduction roadmap.
## Note on scope
This is docs-only. It documents the *complete* pathfinding system, so it references a couple of pieces that ride in separate PRs (the `ApproachTarget` AI fix and the `pathfinding.maxSearchNodes` setting). If those havent merged yet, sequence this after them so the doc doesnt describe unshipped code. The StepCache/`.swb`/provider material it documents is already on `main`.
## Summary
Captures the durable learnings from the message-interpolation work (PRs #2434, #2436, #2437, #2438, #2440) as reference documentation. **Doc-only PR — no code changes.**
The original Phase 2 audit (PR #2435) was development scaffolding and was closed unmerged once Phase 3 consumed it. This PR replaces it with proper reference docs that future authors can consult.
## What's added
### `dev-docs/string-handling.md`
- Promote `RawInterpolatedStringHandler` from a one-line note to a proper section listing all APIs that accept it (messages, OPL, gumps, packets).
- Document the `:L` lowercase format specifier.
- New comprehensive **"Interpolation Anti-Patterns"** section covering 8 patterns with before/after examples — applies to any handler-aware API:
1. Ternary with interpolated branches
2. Switch expression with interpolated arms
3. Pre-built local typed as `string`
4. `.ToString()` (or any string-returning method) inside a hole
5. String concatenation inside a hole
6. `string.Format` feeding a handler-aware API
7. LINQ-built strings inside a hole
8. Pre-built concat var
### `dev-docs/networking-packets.md`
- Add **"Player-Facing Message APIs"** section listing `Mobile` / `Item` / `NetState` message methods with their handler overloads.
- Note the `IBroadcastFilter` pattern for new spatial-broadcast helpers.
### `dev-docs/property-lists.md`, `dev-docs/gump-system.md`
- Cross-reference the new anti-patterns section.
- Add explicit `.ToString()` inside holes warning to property-lists (it had no such guidance before).
### `dev-docs/claude-skills/`
- Mirror the same content (condensed) in `modernuo-string-handling.md`, `modernuo-networking.md`, `modernuo-property-lists.md`, `modernuo-gump-system.md`.
- Add audit rule #17 to `modernuo-code-audit.md` covering all 8 anti-patterns with severity WARNING, plus the `:L` format spec.
### `CLAUDE.md`
- Add audit rule #18 summarizing the interpolation anti-patterns + `:L`, pointing to `dev-docs/string-handling.md` for details.
## Why this matters
Before this PR there was no documentation explaining when an interpolated string call site silently allocates a string despite the receiving API providing a handler overload. The Phase 3 cleanup (PRs #2436/#2437/#2438) discovered ~28 such sites in the codebase; without these docs the same patterns would re-emerge. The new audit rule + CLAUDE.md entry will catch them at write time.
BaseCreatures are deleted on death (Mobile.OnDeath calls Delete for non-players), so after save/restart the corpse's _owner reference resolves to null. CorpseNotoriety gated its entire creature branch on `target.Owner is BaseCreature`, falling through to player-corpse logic once the reference vanished. That made monster corpses turn red (body.IsMonster -> Murderer) and innocent NPC corpses turn grey (null is not PlayerMobile -> CanBeAttacked) on the next restart.
Snapshots the relevant owner state into CorpseFlag at corpse creation: OwnerWasBaseCreature, OwnerWasSummoned, OwnerWasAnimatedDead. Folds the standalone _murderer bool into CorpseFlag.Murderer for consistency with Criminal. CorpseNotoriety now consults the flags so the creature branch stays correct without a live mobile reference.
Bumps Corpse serialization to v16 with a MigrateFrom(V15Content) that maps the old Murderer bool onto the new flag. Pre-fix corpses already on disk decay within 7 minutes; their first post-restart color may be wrong, which is acceptable.
Also documents that the schema generator must be run after every version bump (`dotnet tool run ModernUOSchemaGenerator -- ModernUO.slnx`) since `dotnet build` does not emit migration JSON files.
## Summary
- **Add a self-referencing `InterpolationHandler` to `ValueStringBuilder`** that writes directly into the builder's buffer — zero intermediate allocation, works with `stackalloc`-backed builders
- **Replace all `System.Text.StringBuilder` usage** across the codebase with `ValueStringBuilder`
- **Convert `ValueStringBuilder.Create()` to `stackalloc`** at 10 sites where output length is provably bounded
- **Convert manual `Dispose()` to `using var`** where possible, and hoist loop-scoped builders outside loops with `Reset()`
- **Convert verbose `Append()` chains to `Append($"...")`** interpolation for readability
- **Add comprehensive documentation** for string handling patterns
## InterpolationHandler Design
`ValueStringBuilder` is a `ref struct`, which creates challenges for C#'s interpolated string handler pattern:
- **`ref` fields to ref structs are not allowed** (CS9050)
- **`[InterpolatedStringHandlerArgument("")]` passes struct receivers by value**, not by ref
- **`ISelfInterpolatedStringHandler` requires boxing** ref structs into interface fields
**Solution: Copy-and-reconcile pattern.** The handler receives a value copy of the builder. The copy shares the same underlying `char` buffer (`Span` points to the same `stackalloc`/pooled memory), so writes go to the original buffer. `Append()` reconciles by `this = handler._builder`, updating `_length` and any buffer references changed by `Grow()`.
This is safe because:
- The game loop is single-threaded — no concurrent access between handler construction and reconciliation
- If `Grow()` occurs in the copy, the original's stale buffer isn't accessed until `Append()` replaces it
- `Dispose()` correctly returns the reconciled buffer to the pool
## Changes by Category
### ValueStringBuilder (`Projects/Server/Buffers/ValueStringBuilder.cs`)
- Added nested `InterpolationHandler` ref struct with copy-and-reconcile pattern
- Added `Append([InterpolatedStringHandlerArgument("")] scoped ref InterpolationHandler)` method
- Removed `RawInterpolatedStringHandler` overloads (new handler replaces them)
- All `AppendFormatted` overloads delegate to existing `Append` methods (no code duplication)
- Alignment support via direct private field access (nested type privilege)
### StringBuilder → ValueStringBuilder (15 files)
Replaced all `new StringBuilder()` with `ValueStringBuilder.Create()` or `stackalloc`:
- ConPVP games: KingOfTheHill, DoubleDom, CTF, BombingRun, TourneyMatch
- ConPVP infrastructure: Tournament, Participant, TourneyParticipant
- ConPVP gumps: ArenaGump, TournamentBracketGump, AcceptTeamGump, ConfirmSignupGump
- Commands: Handlers, Logging, Add
- Other: TownCrier, SpeechLogGump, TestCenter
Key patterns:
- `sb = new StringBuilder()` reassignment → `sb.Reset()`
- `sb.AppendFormat("{0:N0}", value)` → `sb.Append($"{value:N0}")`
- `sb.Append(x).Append(y)` chains → separate statements (VSB returns void)
### Create() → stackalloc (10 files)
Converted heap-allocated builders to stackalloc where output is bounded:
- ClientVersion (32), MapSelection (160), HouseRaffleStone (48)
- HolySense (96), UnholySense (96), ClientVerification (192)
- AcceptTeamGump (64), ConfirmSignupGump (64)
- BaseWeapon (160), BaseArmor (128)
### Loop optimizations (2 files)
Hoisted `ValueStringBuilder` creation outside loops with `Reset()` per iteration:
- TourneyMatch.cs: `using var` inside for loop → stackalloc before loop
- ArenaGump.cs: `Create()` + `Dispose()` per iteration → stackalloc before loop
### Append chain → interpolation (5 files)
Converted multi-line `Append()` chains to `Append($"...")`:
- BountyMessage.cs: title switch (6 cases), paragraph (15→1 Append), description lines, closing
- AcceptTeamGump, ConfirmSignupGump, TournamentBracketGump: tournament type strings
- AdminGump: comment/tag formatting in loops
### Documentation
- `dev-docs/string-handling.md`: Full reference — construction, interpolation, disposal, decision guide
- `dev-docs/claude-skills/modernuo-string-handling.md`: Claude skill with quick reference
- `CLAUDE.md`: Added rule 17 (no StringBuilder), dev-docs table entry, skills table entry
- `dev-docs/code-standards.md`: Updated memory management section
## Test Plan
- [x] `dotnet build` — 0 errors, 0 warnings
- [x] `dotnet test` — 940/940 tests pass
- [x] 28 ValueStringBuilder tests covering all reconciliation scenarios:
- Stackalloc no-grow, stackalloc with grow (→pool transition)
- Heap no-grow, heap with grow, heap double grow
- Pre-existing content with and without grow
- Sequential multiple `Append($"...")` calls
- Mixed plain + interpolated Append
- Empty interpolation, literal-only, format specifiers
- Null string holes, ISpanFormattable types
- Dispose after stackalloc→pool grow
Summary
- Adds CLAUDE.md at repo root with 14 terse code audit rules (always loaded, low token cost)
- Adds pointer files for other AI tools: AGENTS.md (Codex), GEMINI.md, .github/COPILOT-INSTRUCTIONS.md (Copilot), .cursorrules (Cursor) — all redirect to CLAUDE.md as single source of truth
- Gitignores /.claude so personal AI config isn't distributed
- Moves Claude skills to dev-docs/claude-skills/ (opt-in, not auto-loaded)
- Adds 14 dev-docs covering codebase conventions
Code Audit Rules (in CLAUDE.md)
1. LINQ tiered rules (Tier 1 free, Tier 2 warm, Tier 3 forbidden)
2. No Console.WriteLine — use LogFactory.GetLogger()
3. No concurrency primitives in game code
4. No World.Mobiles/World.Items iteration
5. Clean up refs in OnDelete()/OnAfterDelete()
6. Cancel timers in OnDelete()/OnAfterDelete()
7. STArrayPool<T>.Shared not ArrayPool<T>.Shared
8. PooledRefList<T> not new List<T>() on hot paths
9. Serialization: partial class, [Constructible], no serialized TimerExecutionToken
10. No Task.Run/new Thread() in game code
11. Never assume era — ask which expansion
12. _camelCase fields, PascalCase properties/methods
13. No empty gumps — use DisplayTo() pattern
14. PropertyList string literals must be {} holes, cliloc-as-argument uses :#
Kamron Batman