Converts BaseCreature's hand-written v22 serialization to codegen v23.
Nearly every field sits behind a [SaveFlag], so a creature matching its
defaults writes only [version int][ulong flags][default AI] - 13 bytes -
instead of ~236, and the writer's work is mostly branch-not-taken. With
500k-1M creatures in a world, this is the dominant slice of mobile save
freeze time and disk.
- Speeds serialize only when they differ from the creature's npc-speeds
values (GetSpeeds/GetMoveSpeeds on both the flag check and the load
default), so table edits now reach existing unmodified spawns on
restart, and former paragons (snapped back to table values) elide
fully. CurrentSpeed writes only when it differs from PassiveSpeed.
- The delete countdown is a [DeserializeTimer] field (anchored);
stabled/controlled pets never persist one, and the abandoned-pet
3-day fallback lives in AfterDeserialization for both load paths.
- SummonEnd stays anchored, written only while summoned.
- Old saves (v0-22) load through the retained legacy
Deserialize(reader, version), now assigning raw fields; the shared
post-load fixups (stat timers, AI creation, followers, animate-dead
registration, unsummon timer) moved to [AfterDeserialization].
- Side-effect setters became generated-field hooks (Team, Controlled,
Summoned, Loyalty clamp, resistance seeds, CurrentSpeed); properties
whose semantics the hooks cannot express stay hand-written as
[SerializableProperty] (ControlMaster/SummonMaster bracket the
assignment with follower bookkeeping, ControlOrder must run on equal
re-assignment, Tamable/IsParagon/move speeds have custom getters).
- CreatureDeathEvent/CreatureDeletedEvent moved to a CreatureEvents
host class: the events generator and the serialization generator each
emit a [GeneratedCode] partial for the declaring type, and the
attribute forbids duplicates (CS0579).
- m_ fields renamed to _camelCase.
Tests: new-format round trips (default and fully populated) with exact
byte consumption, back-to-back saves byte-identical, and a
byte-authentic fossilized v22 stream loading through the legacy path.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
## Summary
Phase 3 of the anchored-time work: **every actively-written delta-time value in the engine now stores an anchored timestamp** — absolute on the wire, shifted forward by the downtime at load. Remaining time survives restarts (as delta did), and unlike delta, the bytes do not change on every save, so an idle world serializes identically save after save.
The answer to "is it possible everywhere": **yes** — including the one case that looked impossible.
## The GenericPersistence problem, solved
`GenericPersistence` bins (`Virtues.bin`, `StealableArtifacts.bin`, …) are raw payloads with no idx header, so they have no anchor of their own — anchored reads there would silently apply zero shift. But the anchor is a property of the **save**, not the file: every file in one save shares one `World.SaveStartTime`, and `Persistence.Load` reads **all** entity indexes (phase 1) before **any** persistence payload (phase 2). So the idx v5 header stamps a save-wide `World.LoadTimeShift`, and generic persistence readers inherit it. No file-format change, no per-bin header, old bins unaffected.
## Converted
- **Item v10 → v11**: `LastMoved` — previously whole-minute delta, rewritten every save for every item, the single largest source of idle-save churn — and `DecayResetTime` (retiring the TODO from #2583). **Mobile v37 → v38**: the three stat-gain stamps. **BaseCreature v20 → v21**: `SummonEnd`.
- **17 code-generated classes** (`[DeltaDateTime]` → `[AnchoredDateTime]`, version bump + `MigrateFrom` each): the five field spells, TransientItem, VirtueContext (×7 fields), PuzzleChestSolutionAndTime, BaseCamp, BaseBoat, RentedVendor, PlayerVendor, Ethics Player, Sheep, StarRoomGate, ChampionSpawn (×3), Corpse (`TimeOfDeath`, v19). The `MigrateFrom` bodies were generated from each class's current migration schema and are compiler-verified; VirtueContext's save-flagged nullables fall back to the same defaults the old deserialize left in place. Corpse's six migrations moved to a new `Corpse.Migrations.cs`.
- **Hand-written sites**: StealableArtifacts (v2), VendorInventory (v1), ML quest objectives (persistence v3) — each gated on its own version.
**Not converted, deliberately**: the ~25 read-only `ReadDeltaTime` sites in legacy version fallbacks and migration replays — they decode existing old bytes and must never change. `[DeltaDateTime]`/`WriteDeltaTime` remain available for them.
## Verification
- Build 0 errors / 0 warnings; **837 + 708 tests green**.
- Schema regeneration produced exactly the 17 expected new `vN.json` files (all `AnchoredTime` rule args), nothing else touched.
- **New acceptance tests** pin the point of the whole effort: serializing the same item at two save times **5 hours apart produces byte-identical output**, and `LastMoved`/`DecayResetTime` round-trip **exactly** at sub-minute precision (the old minutes encoding destroyed both properties).
## Notes for review
- `LastMoved` grows from a 1–3 byte encoded minutes value to 8-byte ticks per item — the price of byte-stability; it repays itself in incremental-save behavior since unchanged items now produce unchanged bytes.
- BaseEscortable-style semantics are unchanged: anchored shift preserves *remaining* time exactly, the same contract delta provided, so no gameplay-visible behavior changes — deadlines simply stop being consumed by downtime that delta already protected against, now with stable bytes.
## Enforcement
`WriteDeltaTime` is now `[Obsolete]` (interface + implementation). With the repo's warnings-as-errors, any new delta-time write — hand-written or emitted by a still-unconverted `[DeltaDateTime]` field — fails the build, with the migration instructions in the message. That the full solution still builds with **zero warnings** is itself the proof no active delta writer survived the conversion. `ReadDeltaTime` deliberately stays un-attributed: its remaining callers decode existing old bytes and are correct forever; its XML docs now state the legacy-decode-only contract.
### Summary
- Adds [Code Generated Events](https://github.com/modernuo/CodeGeneratedEvents)
- Removes EventSink.PlayerDeath
- Adds `PlayerDeathEvent` and `CreatureDeathEvent` using code generated events
> [!Important]
> **Developer Note**
> Use `[OnEvent(nameof(PlayerMobile.PlayerDeathEvent))]` instead of `EventSink.PlayerDeath` delegate
> Check this commit for examples of how to use this.
> [!Important]
> **Developer Note**
> This code change will **completely move gumps out of the core**
### Summary
- Adds `GetGumps()` convenience which exposes methods to Find/Close/Send multiple gumps. This helper is a performance improvement by eliminating the Dictionary<Player, List> lookup for gumps.
### Summary
- Drastically streamlines the spell targeting by collapsing the target classes into a single `SpellTarget<T>` class.
- Moves TargetRange to the spell itself so it can be used by MageAI.
- Changes range check in MageAI to use TargetRange. This should fix target acquisition bugs
### Summary
- Fixes timer intervals not continuing
- Fixes `Timer.Index` being off by 1. Should start at 0 for the first OnTick
- Simplifies Gift of Renewal end check
- Fixes force of nature not applying at the proper time and simplifies the timer logic.
### Summary
- Cleans up target cancellation being called incorrectly.
- An invalid target type (which should never happen), now calls `OnTargetUntargetable` instead of `OnTargetCanceled`
- Removes double calls to `FinishSequence` in Spells.
### Summary
- Fixes some serialization issues with spell items
- Fixes accessibility issues with field spells and removes the awkward "InternalItem" concept
- Codegens the fields/items used in spells
### Summary
* Refactors getting static/multi tiles to not use allocations.
* `TileList` is now only used during bootstrapping and uses rented buffers to eliminate extra allocations.
* Replaces `StaticTile[] GetStaticTiles` with:
```cs
Map.StaticTileEnumerable GetStaticTiles(int x, int y);
Map.StaticTileEnumerable GetStaticAndMultiTiles(int x, int y);
Map.StaticTileEnumerable GetMultiTiles(int x, int y);
```
* Removes `Synchronized` and `lock` from TileMatrix. It is no longer considered a multi-thread safe system.
### Summary
TLDR - .NET Framework rounded TimeSpan (and some DateTime) methods to the nearest millisecond. This was actually _expected_ accidentally for parts of RunUO.
We are aiming to fix this and clean up some other bad assumptions.
Closes#1604
### Summary
Eliminates `IPooledEnumerable<T>` and `eable.Free()` from `Map` for mobiles. This drastically simplifies code that iterates in range, for example:
```cs
foreach (var m in m.GetMobilesInRange(5))
{
}
```
The code above no longer requires an eable and calling `Free()`.
- [X] Fixed several locations where an NPC that was damaged would cause a server crash.
- [X] Removed an unnecessary allocation in guard fake calls (NPCs calling guards on you)
- [X] Fixes damage precision loss in Poison Strike Spell
- [X] BogThing no longer attempts to "search" for boglings to eat when it is at full health
### Summary
Modifying a ValueLinkList using one of the methods will bump the "version". This field is used by iterators (foreach loops) to determine if the link list was modified while iterating. The sector.Items (and in the future other lists), will no longer be safe to modify while iterating. The server will _CRASH_ if the ValueLinkList is modified.
Thanks to @stefanomerotta for help!
### Screenshots
<img width="588" alt="image" src="https://github.com/modernuo/ModernUO/assets/3953314/83ee0b6e-ff4f-4768-9e29-84456e04b1ec">
### Summary
Eliminates `IPooledEnumerable<T>` and `eable.Free()` from `Map` for items. This drastically simplifies code that iterates in range, for example:
```cs
foreach (var item in m.GetItemsInRange(5))
{
}
```
The code above no longer requires an eable and calling `Free()`.
### BREAKING CHANGE ###
The constructor for `TextDefinition` has been removed. Instead use `TextDefinition.Of()` or cast the integer/string to TextDefinition.
## Changes
- [X] Adds OPL convenience methods
- `opl.Add(cliloc, value)` and `opl.Add(value)` - value as an integer or string works just like `opl.Add(cliloc, $"{value}")`
- `opl.AddLocalized(cliloc, clilocValue)` - works the same as `opl.Add(cliloc, $"#{clilocValue}");`
- [X] Simplifies basic `list.Add()` situations
- [X] Changes cliloc as an argument so it works with custom IPropertyList implementations (HTML)
- [X] Fixes plants so they support the old localization and new (changed in 7.0.12.0+)
- [X] Exposes more methods to override for Item to make creating custom OPL possible.
## Important Notes
* Using a ternary as an argument, like this `opl.Add(number, showType ? $"{type}\t{value}" : $"{value}");` _will not use the correct string interpolation_. This means if you use a custom PropertyList (for HTML or some other purpose), the property list won't be localized properly.
* All localization values must be interpolated, even if they are literal strings, or integers. Example: `opl.Add(number, $"{"Charges"}\t{m_Charges}");` is correct. Using the following: `$"Charges\t{m_Charges}"` will not work for custom PropertyList implementations!
## Breaking Changes (New API)
ObjectPropertyList supports the following API:
```cs
list.Add(500000);
list.Add(500001, stringArgument);
list.Add("Some text");
list.Add($"Some text with {argument}");
list.Add(500002, $"{arg1}\t{arg2}");
```
## Notes
1. All API uses that require a formatter like this:
```cs
list.Add(500002, "{0}\t{1}", arg1, arg2);
```
Should be changed to use string interpolation, for example:
```cs
list.Add(500002, $"{arg1}\t{arg2}");
```
2. The following paradigm should no longer be used:
```cs
list.Add(1061170, prop.ToString()); // strength requirement ~1_val~
```
The new string interpolation API will avoid having to convert the argument to a string before writing it to the packet. Instead use the following:
```cs
list.Add(1061170, $"{prop}"); // strength requirement ~1_val~
```
### Benchmarks
```cs
| Method | Mean | Error | StdDev | Gen 0 | Allocated |
|------------------------------- |---------:|--------:|--------:|-------:|----------:|
| BenchmarkOldOPL | 241.0 ns | 0.56 ns | 0.47 ns | 0.0105 | 88 B |
| BenchmarkStringInterpolatedOPL | 199.9 ns | 2.44 ns | 2.39 ns | - | - |
```
### Changes
- [X] Removes crash in STArray.Return when array is null.
- [X] Fixes NPE in OPL when entity is null. Serial in packet will be 0 when entity is null.
- [X] Fixes NPE in AosAttributes when Parent is null.
- [X] Changes OPL to use string interpolation.
- [X] Introduces `IPropertyList` to allow extending PropertyList for other uses.
* Removes scaled speed by dex for monsters
* Changes scaled speed by dex for pets (HS+ expansion) to be 400ms -> 100ms between 50 -> 200 dex
* Removes speed changes that were broken for various mobs
* Combines "Legacy" speed and renames the class to `NPCSpeeds`
* Creates speed "classes" (slow, medium, fast, very fast)
* Introduces a new overridable property `SpeedClass`. Register a new speed class using `NPCSpeeds.Register()` and then set the speed class to bulk/mass apply speeds.
Order of speed determination:
1. SpeedMod
2. SpeedClass property (not null)
3. SpeedClass entry in Data\npc-speeds.json for that type
4. "Fast" (200ms Active, 400ms Passive)
* Adds the following configurations:
* `movement.delay.npcMinDelay` - 0.1 - Pets or Non-monster NPCs
* `movement.delay.npcMaxDelay` - 0.4 - Pets or Non-monster NPCs
* `movement.delay.monsterMinDelay` - 0.4 - Non-pet Monsters or NPC vs Player Combat
* `movement.delay.monsterMaxDelay` - 0.8 - Non-pet Monsters or NPC vs Player Combat
* `movement.delay.monsterMinDex` - 150 - Dex maximum for delay by dex
* `movement.delay.MinDex` - 190 - Dex maximum for delay by dex
### Changes/Fixes:
* Adds timer pooling.
* Allows pool to be configurable in ModernUO.json
* Pool replenishes itself asynchronously if depleted.
* Fixes an issue with barkeeps and town criers
* Fixes an issue with incognito buff icons not being removed
* Fixes an issue with polymorph name mod not being removed
* Fixes several places where timers go on forever even after an object is deleted, keeping a reference (memory leak)
* Eliminates the timer for MiningCart altogether.
* Deletes `AcidSlime` since it is a duplicate of `PoolOfAcid`
* Fixes HonorableExecution and standardizes the code for other Bushido moves.
## Changes to the Timer API:
```cs
public class Timer
{
// Creates a timer that will be returned to the pool once execution stops.
public static void StartTimer(Action callback);
public static void StartTimer(TimeSpan delay, Action callback);
public static void StartTimer(TimeSpan delay, TimeSpan interval, Action callback);
public static void StartTimer(TimeSpan interval, int count, Action callback);
public static void StartTimer(TimeSpan delay, TimeSpan interval, int count, Action callback);
// Creates a timer and returns a token for more control. Requires manual cancellation in order for the timer to be returned to the pool.
// If the token is dereferenced, the timer will be dereferenced too. While not returning a timer to the pool is not considered hazardous, it does defeat the purpose of pooled timers.
public static void StartTimer(Action callback, out TimerExecutionToken token);
public static void StartTimer(TimeSpan delay, Action callback, out TimerExecutionToken token);
public static void StartTimer(TimeSpan delay, TimeSpan interval, Action callback, out TimerExecutionToken token);
public static void StartTimer(TimeSpan interval, int count, Action callback, out TimerExecutionToken token);
public static void StartTimer(TimeSpan delay, TimeSpan interval, int count, Action callback, out TimerExecutionToken token);
// If you aren't sure how to use the API above, or you don't care about performance, then you can use the old RunUO Timer.DelayCall
public static DelayCallTimer DelayCall(Action callback);
public static DelayCallTimer DelayCall(TimeSpan delay, Action callback);
public static DelayCallTimer DelayCall(TimeSpan delay, TimeSpan interval, Action callback);
public static DelayCallTimer DelayCall(TimeSpan interval, int count, Action callback);
public static DelayCallTimer DelayCall(TimeSpan delay, TimeSpan interval, int count, Action callback);
}
public struct TimerExecutionToken
{
public bool Running { get; }
public int Index { get; }
public int RemainingCount { get; }
public DateTime Next { get; }
}
```
## When to use `TimerExecutionToken`?
Use tokens when you want to gain the performance benefit of using a pooled timer, but you need one of the following:
* Access to the next time the timer will tick:`token.Next`
* Access to which interval, how many intervals there are, or how many are remaining: `token.Index`, `token.Count`, and `token.RemainingCount`
* Stop a timer manually.
* Determine if the timer is running: `timer.Running`
* See notes below about requirements for using tokens!
## Notes about using the TimerExecutionToken:
When you opt-in to receive a token, you must call `Cancel()` to return the timer. This can be done inside of the callback, or outside of the callback at any time.
If this is not called and your timer is an infinite interval, then you will create a potential memory leak, or null pointer exception in your callback.
If the timer ends and is stopped, but cancel is not called, then the timer will never return to the pool and stay referenced until the token is deleted or cancel is called. (Memory leak)
## Is this thread safe?
No. The ModernUO timer system is not thread safe at all. If you require a thread safe timer system, contact me and I'll help adapt this system. Keep in mind that there is a massive performance hit to make this thread safe when there are literally no use cases for it.
If you need to synchronize execution, meaning you want to execute code from another thread on the core thread. Let's say you have a discord bot that is pushing commands to the game server. Then use `EventLoopContext.Post(SendOrPostCallback callback, object state);`.
- [X] Caches DateTime.NowUtc on the game loop (not other threads)
- [X] Replaces all locations where it makes sense
- [X] Adds Min/Max for `IComparable` (TimeSpan, DateTimes, etc)
Closes#261
- [X] Exposes Index/Count on the timer.
- [X] Cleans up abilities
- [X] Combines some spell context/info objects with their timers to reduce allocations
- [X] Fixes a bug where immolating weapon both finishes effect or stops in the wrong order due to a race condition.
- [X] Removes some uses of linq
- [X] Creates struct based enumerator for Skills
- [X] Creates a struct based enumerator for TypeCache
- [X] Changes HarvestDefinition to an init array instead of List
- [X] Changes HeritageTokenGump Response from List to Array
- [X] Updates Movement packets
- [X] Adds OSI fastwalk packets. These aren't used on OSi anymore.
- [X] Adds new movement handling, but looks like the client doesn't use it. (Also leaving the 0x4000 Character List Flag off)
- [X] Adds time sync request handler, but also looks like the client doesn't use it.
- [X] Adds time sync response for time sync, just in case, but it isn't used, so not sure about the arguments.
- [X] Reimplements RunUO's fastwalk to use a circular array on the netstate instead of every mobile
- [X] Removes ClearFastwalkStack from RunUO implementation. This shouldn't be needed anymore
Changed fastwalk settings:
```cs
public static int WalkFootDelay { get; set; } = 440;
public static int RunFootDelay { get; set; } = 220;
public static int WalkMountDelay { get; set; } = 220;
public static int RunMountDelay { get; set; } = 110;
public static bool EnableFastwalkPrevention { get; set; } = true;
public static AccessLevel FastwalkExemptionLevel { get; set; } = AccessLevel.Counselor;
// If this is changed during runtime, then the steps array needs resizing.
public static int MaxSteps { get; private set; } = 4;
```
modernuo.json
```json
{
"settings": {
"movement.delay.runFoot": "220",
"movement.delay.runMount": "110",
"movement.delay.walkFoot": "440",
"movement.delay.walkMount": "220",
"movement.enableFastWalkPrevention": "True",
"movement.fastwalkExemptionLevel": "Counselor",
"movement.maxSteps": "4"
}
}
```
Notes about OSI fastwalk:
While it does work, I can't find a benefit in using it because of the variable speeds. If players moved at a single speed then we could refill the stack every X milliseconds with 6 keys and use a naive token bucket implementation.
Unfortunately variable speeds mount/run/walk/etc means we would have to use a leaky bucket algorithm.
If we are using a leaky bucket algorithm with a variable leak, then we don't need to send tokens because we are already tracking it on the server side.
ModernUO vs OSI Fastwalk:
When the fastwalk was implemented on OSI, it used up to 6 tokens. These tokens were probably distributed every 600-750 milliseconds. To get the same effect, the new fastwalk settings might need to be adjusted. I would tweak them and feel free to let me know what worked for you!
Bumps release version
