## Why
The shard owner, on a Starlink CGNAT address, was blocked by the imported reputation blocklist.
The cause was not CrowdSec. The address was a literal line in `ip-blocklist.txt`, so `BlocklistFilter` denied it at accept and then promoted it — and clearing the CrowdSec decision could not fix it either, because the file entry re-reports within `promoteSuppression` of every reconnect attempt.
This is structural, not a one-off. Reputation feeds list shared consumer address space constantly: on CGNAT one public address fronts many subscribers **at the same time**, so a single abusive customer gets the address listed and everyone else behind it is blocked with them. Where leases rotate, a listing says little about whoever holds the address now. Around 1,000 Starlink addresses sit in the current list.
So exemptions go where they cost nothing, and escalation is driven by what a connection actually does.
## Generator — `tools/Export-IpBlocklist.ps1`
`-AllowlistFile` takes multiple paths, subtracted from the merged set before the output is written. Defaults to every `ip-allowlist*.txt` beside the output, merged into one allow set:
- `ip-allowlist.txt` — operator exemptions, created once and **never rewritten**
- `ip-allowlist-<name>.txt` — a carve-out you built, regenerable and copyable between shards
**Subtraction is range-correct.** An allowlisted address inside a blocked CIDR splits that CIDR around the hole rather than being silently ignored. This also fixes `-ExcludeAnonymizers`, which parsed CIDR entries into `$anonCidr` and then only ever subtracted singles.
**No carve-out ships.** A carve-out names a real network, and which ones a shard should exempt depends on where its players actually are — so publishing one would make that policy call for every shard and put a specific provider's address space in the repo. The script builds them on request instead:
```powershell
.\Export-IpBlocklist.ps1 -AddCarveout starlink -Asn 14593
```
Carve-outs are **discovered, not configured**: every `ip-allowlist*.txt` beside the output is subtracted, by the generator and by the shard, so a file an admin adds needs no config edit and no code change. Each carries an `asn=` marker in its header, which is how `-RefreshCarveouts` rebuilds it without the script keeping a list of anyone's networks; a hand-written allowlist has no marker and is never rewritten.
Prefixes come from **announcements, not ownership records**, because registry data disagrees with what is actually routed and silently caps result sets: ARIN whois returns at most 256 rows and gives per-customer /24s, and `206.83.96.0/19` reads as APNIC in RDAP even though `206.83.96/21` is announced by Starlink.
Editing an allowlist bypasses `-MinInterval`, so a just-added exemption isn't indistinguishable from the allowlist not working. A Starlink carve-out, if you build one, costs **~4,300 IPs + ~144 CIDRs of 4.2M (0.10%)**.
## Allowlists
**`FileAllowlist`** reads the same files the generator subtracts, so an operator entry means "leave this address alone" for real. Subtraction alone only covers being *blocked*; behavioural detections never consult the blocklist, so without this a carve-out was quietly routed around — one scanner behind a shared address was enough to get everyone behind it contributed and firewalled, with nothing in the shard's own config explaining why. Reading the files also means an entry applies on the next reload rather than the next regeneration, which is what matters when someone is complaining now.
**`LoginAllowlist`** is earned by authenticating, with a 90-day TTL because an address that logged in years ago is a stranger. Its own store rather than `Account.LoginIPs`, which has no timestamps and cannot be backfilled. An entry is evidence rather than a licence: 10 suppressed contributions in an hour revokes it, and a fresh login forgives the tally.
Both are consulted **only after the blocklist has already matched**, so a normal accept pays nothing for them and the accept gate stays allowlist-free. `BanExemptions` combines them behind `BanChannel.IsExempt` and suppresses escalation only — every local defence still applies.
Two limits, both deliberate and documented in the class: `LoginAllowlist` **cannot bootstrap** (an entry is only earned by getting in, so it never repairs an existing false positive), and it is weakest on rotating CGNAT. That is why `FileAllowlist` is the fix for those, and why it is manual.
## Behavioural detection
| Reason | Trigger |
|---|---|
| `silent-connect` | Reaped after 5s having sent **zero bytes** |
| `invalid-seed` | Opened with a zero seed |
| `foreign-protocol` | Positively identified as HTTP, TLS or SSH |
**`ForeignProtocol` inverts the test.** Asking "is this a good UO client?" cannot work: `LoginEncryption.ClientDecrypt` is a byte-for-byte stream XOR, so a legitimate client with encryption enabled when the shard expects none sends a structurally perfect connection whose payload is noise. "Speaks HTTP" is safe where "unreadable" is not — however misconfigured a UO client is, it never sends `GET / HTTP/1.1`.
Nothing assumes arrival framing. TCP has no message boundaries, so a rule of the form "these bytes must arrive together" is broken by construction and drops real players on poor links. A prefix match with too few bytes to confirm waits for more. A four-byte seed can legitimately spell `GET ` (the address 71.69.84.32) or `0x16 0x03 0x0?` (22.3.x.x), so confirmation requires the request line to continue in printable ASCII or an actual ClientHello inside a plausible record — a real client's fifth byte is a packet id (`0x80`, `0x91`, `0xEF`), none of them printable, so those collisions fall through.
Everything is keyed on **bytes-received rather than elapsed time**. A connection that sent something and ran out of time is far more likely a slow link than an attack, and banning those produces the worst failure mode available: the player retries, trips the rate limiter, and compounds a bad connection into hours of being firewalled off.
## `AutoDenylist`
A short-lived local hold (15m) on behavioural detections, as `IConnectionFilter` + `IBanReporter` over one store so the engine detection sites never reach into content.
This closes the gap where a flood pays for a socket, buffer and `NetState` slot per connection while waiting for the OS bouncer — the verdicts that matter most are reachable only *after* reading bytes — and it is the entire defence on a shard running no bouncer, which is the default config. Not persisted: a holding pen that survives restarts is a ban without a ban's review.
Cost: one dictionary lookup on a usually-empty dict per accept.
## `BanReasons`
Centralises the reason slugs. `IsBehavioral` is an **opt-in** set, not "everything except manual", so a future reason escalates normally instead of silently inheriting an exemption or entering a local denylist.
This caught a real bug during review: the first cut of the exemption swallowed `manual` admin bans (`Commands.cs`, three sites in `AdminGump`) for any allowlisted address.
## Fixes found in review
- **`BanConfiguration.Settings` was null until `Configure()` ran**, while the reap path dereferences it every `Slice()`. A harness driving `NetState.Slice()` directly hit an NRE that presented as flaky because it depended on whether an earlier test had already called `Configure()` — which is why it failed on some CI platforms and not others. Now starts at the record's defaults, with idempotency tracked by a flag; this also removes the same latent NRE from the pre-existing rate-limit path.
- **`-AllowlistFile` was typed `[string]`** while documented and used as a list, so passing two paths would have collapsed them into one string.
## Layout and docs
Content network code moves out of `Misc/` into `UOContent/Network/`, one concern per folder — `AutoDenylist/`, `Blocklist/`, `CrowdSec/`, `Firewall/`, `LoginAllowlist/`, `Packets/`. **Namespaces are untouched**, so these are pure file moves (git tracks all 16 as renames).
`dev-docs/ip-bans-and-allowlists.md` documents the subsystem, leading with the operator process for unblocking a player — including the three things that look sufficient and are not: deleting the CrowdSec decision alone, editing `ip-blocklist.txt` by hand, and `cscli allowlists` alone. `.gitignore` covers the new config files.
## Testing
Build clean. **Server.Tests 810 passed**, **UOContent.Tests 637 passed**, zero warnings. This branch adds 38 tests; the rest of the delta is main's, since this is rebased on current `main`.
New coverage: TTL boundary and renewal, private-address exclusion, manual-ban-never-exempt, unopted-reason-never-exempt, strike revocation, quiet-window reset, login forgiveness, file-allowlist CIDR coverage, file-allowlist not spending the earned list's strikes, denylist expiry-on-read, cap enforcement, lapsed-entry reclaim, HTTP/TLS/SSH identification, seed-collision fall-through, and encrypted-login-is-not-foreign.
Generator verified end-to-end against live feeds: a clean run ships no carve-out, `-AddCarveout starlink -Asn 14593` fetches and collapses 213 prefixes to 115 ranges in 0.1s over 4.2M entries, `-RefreshCarveouts` rediscovers it by its `asn=` marker, a hand-written allowlist is left untouched, and deleting a carve-out drops it rather than having it rewritten. CIDR splitting verified exhaustively: a single-IP hole in a /24 leaves exactly 255 of 256 addresses blocked.
## Operator note
Existing installs are unaffected until the generator next runs, which creates `ip-allowlist.txt` and nothing else. To unblock someone: add the address to that file and delete any live CrowdSec decision — the existing ban outlives the config change. The shard picks the entry up on its next reload, so re-running the generator is optional.
A shard whose players are on CGNAT (satellite, mobile, or an ISP short on IPv4) will likely also want `-AddCarveout`; see `dev-docs/ip-bans-and-allowlists.md`.
## Also included: a latent CI failure this PR surfaced
`fix(tests): serialize test classes that rent through STArrayPool` touches a property-list test file that has nothing to do with this feature. It is here because it was failing macOS CI, and it is trivially cherry-pickable out if you would rather it went to `main` on its own — **which may be the better call, since it is failing `main` today.**
CI has since gone green with it applied.
`STArrayPool` is single-threaded by design and its bucket cache is a plain `static`, not `[ThreadStatic]`, with a check-then-act initialize in `Return()`:
```csharp
var cacheBuckets = _cacheBuckets ?? InitializeBuckets();
```
Two threads both see null, both initialize, and the loser trips `Debug.Assert(_cacheBuckets is null)`. Anything renting from it has to stay off parallel test threads — which is what the `DisableParallelization` collections are for.
- `ObjectPropertyListReentrancyTests` and `ObjectPropertyListNestedBuildTests` (added in #2555) build property lists, which rent the interpolation buffer, but were not in the sequential collection — unlike `PropertyListInvalidationDuringBuildTests` in the same file. This is a **latent failure already on `main`**; it is timing-dependent, so it shows on some platforms and not others.
- `AutoDenylistTests` (added here) has the same exposure: its cap tests reach `AutoDenylist.Sweep`, which rents a `PooledRefList` without `mt`. The blocklist tests need no marking because `BlocklistSnapshot.Build` asks for the `mt` pool explicitly.
No production change — `STArrayPool` is the right pool on the game loop, where both `Sweep` and the property list actually run.
## Deliberately not included
Waiting for a fragmented four-byte seed at `AwaitingSeed`. It looked like a bug but the disconnect is a deliberate defence: only pre-0xEF clients reach it (0xEF goes through `HandlePacket`, which already waits for its 21 bytes), and waiting converts an instant drop into a full 5s slot hold for a client sending one or two bytes, or a loris dribbling a byte every few seconds. Against a fixed 4096-entry `MaxConnections` table that trades capacity that matters for a fragmentation case a reconnect already fixes.
## Summary
Adds authentic **T2A-era (pre-UO:Third-Dawn) packet-based crafting menus**, enabled via the **`t2aCraftMenus` server setting** (read once at startup; default **`!Core.UOTD`**, so a pre-UO:TD shard gets them automatically). When enabled, double-clicking a crafting tool opens the classic `0x7C`/`0x7D` item-list menu — skill- and material-filtered — instead of the modern gump, covering all 8 tool/skill crafts (blacksmithy, tailoring, tinkering, carpentry, alchemy, bowcraft/fletching, inscription, cartography). It is **not** a runtime/admin-flippable feature flag.
This is the **definitive, reconciled** branch and **supersedes**:
- **#2181** (Delphi — `T2A_CraftingMenus`): the original effort.
- **#2381** (Jack/UOLL — `t2a_crafting_menus`): the research-grounded superset (Delphi's base + 12 corrections), rebased onto current `main`.
Original authorship is preserved across the cherry-picked history: foundation commit **@Delphi79**, mechanic fixes **@jackuoll (Jack Ward)**, reconciliation/fixes/docs mine.
## How it was built
1. Cherry-picked Jack's 13 commits onto current `main` (superset of Delphi's; only 2 trivial FeatureFlags conflicts).
2. Applied targeted fixes (below) with tests.
3. Full convention audit, build, and test pass.
Grounded in independent historical research plus Jack's deep dive. Maintainer reference: `dev-docs/t2a-crafting.md`.
## Mechanics (highlights)
- Double-click tool → target resource → skill/material-filtered menu → craft. Resource pre-selection per skill; make-last by targeting the tool.
- **Stacked-gem jewelry:** target a gem stack → the **full stack** is consumed and the piece is named by count ("a 1000 diamond ring"); count persists (`BaseJewel` serialization **v4 → v5**, new `_gemCount`).
- **Tool-less inscription & cartography** (skill-list invoked; no pen/sextant); inscription consumes reagents+scroll on success and failure, mana only on success.
- **Tailoring matching-hue consumption:** targeting hued cloth/leather consumes only that hue. Crafted items take color from their **`CraftResource`** (not the dyed hue), so dyed leather/cloth don't tint the product; in T2A only colored ingots/ore color items (metal armor/shields).
- **Half-resources on failed non-scroll crafts** (pre-UO:TD).
- **Maker's mark** always prompted for exceptional items, via the shared `QueryMakersMarkGump`.
- Server-side menu infra changes are additive (`ItemListEntry.CraftIndex`, `Entries` setter, `HasSent`).
## Notable changes on top of the cherry-pick
- **Toggle is a startup server setting, not a feature flag.** Removed `ContentFeatureFlags.T2ACraftMenus` (and its admin-flippable plumbing); the value is read once via `ServerConfiguration.GetSetting("t2aCraftMenus", !Core.UOTD)` into `T2ACraftSystem.Enabled`. Since the default tracks the era and it can't be flipped at runtime, there's no incoherent "menus-on / UO:TD-era" state.
- **Stacked-gem consumption (B3a/B3):** consume the full `PendingGemCount` (was deliberately consuming 1 while naming by the stack), null-safe gem type, plain-piece fallback + message. New `T2AJewelGemCraftTests`.
- **Convention audit:** `new List<Item>()` → `PooledRefList<Item>` on the hue-aware consume path; removed dead code.
## Decisions & deviations
- `make-last` kept as **QoL** (post-T2A gump-era feature).
- `half-on-failure` (non-scroll) kept as a **reconstruction** (not OSI-confirmed).
- **Stacked-gem** behavior set per shard authority (overrides the "single gem" reconstruction).
- **Cooking** out of scope (no T2A crafting menu existed for it).
- **No colored items from dyed materials:** crafted color comes from the `CraftResource` type. Pre-AOS leather has no colored variant, so leather is always uncolored; weapons retain resource color only in AOS+ (unchanged, intended).
## Test plan
- Automated: `dotnet build ModernUO.slnx -c Debug` clean; `dotnet test Projects/UOContent.Tests` → **421 passed** (incl. 3 new jewelry tests).
- Manual (needs a running T2A shard + client):
- [ ] Each of the 8 skills opens the correct menu; empty-menu guard fires.
- [ ] Make-last repeats the last craft (jewelry re-prompts gem).
- [ ] Jewelry consumes the full targeted gem stack and names by count.
- [ ] Cartography consumes blank maps only with T2A enabled / maps+scrolls when disabled.
- [ ] Tailoring consumes only the targeted-hue material; crafted items are not tinted by dyed cloth/leather.
- [ ] Maker's-mark prompt on exceptional.
- [ ] Failed non-scroll craft consumes half resources.
- [ ] Inscription: reagents+scroll on success/failure, mana only on success.
- [ ] T2A disabled: gump crafting unchanged.
## Credits
Co-authored-by: @Delphi79
Co-authored-by: @jackuoll
## Summary
Server-side movement throttle that prevents speed hacking while accurately identifying cheaters with detection of lagging connections.
**Key features:**
- Credit buffer (200ms) absorbs timing jitter from legitimate players
- Movement queue handles larger bursts, draining at proper game-tick intervals
- RTT measurement distinguishes network lag from speed hacks
- Queue depth detection catches ACK-throttled speed hacks (going straight)
## How It Works
**Throttle** (prevention): Movements arriving too early either consume credit or get queued. The queue drains at
correct intervals, so speed hackers can't move faster regardless of what they send.
**Detection** (identification): Combines multiple signals to identify cheaters:
| Signal | What it catches |
|--------|-----------------|
| Queue depth ≥4 sustained | ACK-throttled speed hacks (client limits unacked moves to 5) |
| Movement rate >1.05x | Direction-change speed hacks where timing is visible |
| Stable RTT + high queue | Eliminates false positives from laggy players |
**RTT-Aware Logic:**
- Probes only sent to players actively moving (event-driven, not global loop)
- Stable low-latency + problems = suspicious
- Unstable/high-latency + problems = probably just lag, throttle handles it
## Configuration
```json
{
"movementThrottle.maxCredit": 200,
"movementThrottle.softQueueLimit": 6,
"movementThrottle.hardQueueLimit": 10,
"movementThrottle.debugLogging": false
}
```
> [!IMPORTANT]
> **Breaking Changes**
> - DecodePacket and EncodePacket delegates replaced with IClientEncryption interface
> - NetState.Connection (Socket) replaced with internal RingSocket management
> - NetState.RecvPipe and NetState.SendPipe removed (buffers managed internally)
## Summary
Upgrades the networking stack from PollGroup-based I/O to io_uring, significantly improving I/O performance on Linux.
This also adds native client encryption support for encrypted UO clients.
## Major Changes
io_uring Networking Architecture
- Replaced PollGroup with IORingGroup for async socket I/O operations
- Removed Pipe.cs (mirrored ring buffer) and TcpServer.cs in favor of RingSocketManager
- Added NetState.Network.cs - centralized network infrastructure handling accept, recv, send, and disconnect
completions
- Added SocketHelper.cs - platform-specific socket utilities for raw socket handle operations (getpeername,
getsockname)
- Buffer management now handled by RingSocketManager with configurable slab allocation
### Client Encryption Support
- Added full encryption stack in Network/Encryption/:
- EncryptionConfig.cs - configurable encryption modes (None, Unencrypted, Encrypted, Both)
- EncryptionManager.cs - encryption detection and initialization for login/game packets
- LoginEncryption.cs - handles login packet encryption with version-derived keys
- GameEncryption.cs - handles game server encryption using Twofish
- TwofishEngine.cs - optimized Twofish block cipher implementation
- LoginKeys.cs - encryption key table for client versions
- IClientEncryption.cs - interface for client encryption implementations
### NetState Improvements
- Replaced Socket Connection with RingSocket _socket for managed socket lifecycle
- Changed from GCHandle polling to event-based completion processing
- Disconnect handling now properly waits for pending sends to flush
- Simplified connecting socket management using lazy queue removal
### Configuration
- New settings: network.encryptionMode and network.encryptionDebug
- Encryption mode flags: Unencrypted, Encrypted, or Both
### Dependencies
- Replaced PollGroup NuGet package with IORingGroup
- Linux requires liburing-dev / liburing-devel package
### Test plan
- Verify server starts and accepts connections on Linux with io_uring
- Verify server starts and accepts connections on Windows (fallback to IOCP)
- Test unencrypted client connections (ClassicUO with encryption disabled)
- Test encrypted client connections if available
- Verify graceful disconnect flushes pending data
- Confirm CI builds pass on all target platforms
## Summary
- Adds proper Latin1 encoding support, replacing CP1252 usage throughout the codebase
- Adds specialized, optimized string decoding methods with safe string filtering for each encoding type
- Filters invalid Unicode characters (C0/C1 control codes, non-characters) by removal rather than replacement since
the UO client renders nothing for these characters
- Fixes UTF-16 null terminator position handling to correctly advance by 2 bytes
## Changes
TextEncoding.cs
- Added SearchValues-based invalid byte/char detection for efficient filtering
- Added encoding-specific GetString methods: GetStringAscii, GetStringLatin1, GetStringUtf8, GetStringBigUni,
GetStringLittleUni
- Each method supports a safeString parameter for filtering invalid characters
- Little-endian UTF-16 uses direct memory cast for zero-copy decoding on LE systems
- Invalid characters are removed (not replaced with U+FFFD) since the client renders nothing for them
SpanReader.cs
- Added ReadLatin1() and ReadLatin1Safe() methods
- Rewrote encoding-specific read methods to use optimized TextEncoding.GetString* methods
- Fixed UTF-16 null terminator handling: position now correctly advances by byteLength (2) instead of 1
SpanWriter.cs
- Added WriteLatin1 and WriteLatin1Null methods
## Packet Updates
- Updated all packet code to use Latin1 encoding instead of CP1252
- Affected: account packets, equipment packets, menu packets, message packets, mobile packets, player packets, secure
trade packets, vendor packets, gump packets, book packets, mahjong packets
## Filtering Behavior
Invalid characters filtered in safe mode:
```
┌───────────────┬────────────────────────┐
│ Range │ Description │
├───────────────┼────────────────────────┤
│ 0x00-0x1F │ C0 control codes │
├───────────────┼────────────────────────┤
│ 0x7F │ DEL │
├───────────────┼────────────────────────┤
│ 0x80-0x9F │ C1 control codes │
├───────────────┼────────────────────────┤
│ 0xFFFE-0xFFFF │ Unicode non-characters │
└───────────────┴────────────────────────┘
```
Note: Surrogate pairs (0xD800-0xDFFF) are not filtered because proper validation requires context checking for paired
vs unpaired surrogates. The UO client renders nothing for these anyway.
## Test Plan
- All 631 Server.Tests pass
- Verified client rendering behavior using TestUnicodeGump command (pages 1-5)
- Confirmed U+FFFD, unpaired surrogates, and non-characters all render as blank in client
- Verified Latin1 characters (0xA0-0xFF) display correctly
- Verified C1 control codes (0x80-0x9F) are filtered and don't display
### Summary
- Moves `CharacterCreated` event to UOContent using code generated event _CharacterCreatedEvent_.
- Moves `TargetByResourceMacro` event to UOContent using code generated event _TargetByResourceMacro_.
- Moves `GameLogin` event to UOContent using code generated event _GameLoginEvent_.
- Moves `ServerList` event to UOContent using code generated event _ServerListEvent_.
- Streamlines ProfessionInfo
> [!IMPORTANT]
> **Developer Note**
> Custom scripts that use any of these event sinks will need to be updated to use the new code generated events.
> [!Important]
> **Developer Note**
> This code change will **completely move gumps out of the core**
### Summary
- Adds `GetGumps()` convenience which exposes methods to Find/Close/Send multiple gumps. This helper is a performance improvement by eliminating the Dictionary<Player, List> lookup for gumps.
## Summary
- Removes allocation of a `List<ContextMenuEntry>` every time a context menu is created.
- Moves packet/context menu creation logic out of the core
- Fixes tame entry
## BREAKING CHANGE
> [!Important]
> **Developer Note**
> ```cs
> public virtual void GetContextMenuEntries(Mobile from, List<ContextMenuEntry> list)
> ```
> and similar functions changed to
> ```cs
> public virtual void GetContextMenuEntries(Mobile from, ref PooledRefList<ContextMenuEntry> list)
> ```
### Summary
- Fixes various exploits that can crash the shard when the client misbehaves.
- Clients will now be disconnected if they send packets that are marked as out of game only (new flag), while they are in-game.
> [!Note]
> **Developer Note**
> Added an `OutOfGameOnly` which should be used to flag packets as only available out of the game.
> This is the opposite of, yet not the converse to `InGameOnly`.
### Summary
- Fixes various memory leaks related to spells
- Fixes Spell Plague
- Added ability to determine if `sdi` should take effect for Spell Damage.
- Fixes animal form timer ticking non-stop while logged out.
# New Gump API
We are pleased to release a new API that is faster, allocates nearly zero memory, and still feels very similar to the original API. The API is broken into 3 types of gumps, dynamic, static with placeholders, and static without placeholders.
### Dynamic Gumps
These gumps will inherit `DynamicGump` and are meant for gumps that have a dynamic layout. This includes specifying dynamic arguments to HtmlLocalized entries.
## Static Gumps
Static gumps are those where the function to the build the layout is called only once and cached forever. They can optionally have placeholders. These placeholders allow the developer to specify the string values later, dynamically in a `BuildStrings` method on the gump. If a gump does not have any placeholders, the string entries will also be cached forever.
## Benchmarks
To make sure we were going in the right direction and not wasting time, we took copious benchmarks. Here are the final benchmarks for a really simple gump.
Note:
* The majority of creating a gump is compressing the layout and the strings. Compressing each section takes ~6,000ns (12us total).
```cs
| Method | Mean | Error | StdDev | Median | Ratio | RatioSD | Gen0 | Allocated | Alloc Ratio |
|------------------------------- |-------------:|-------------:|-------------:|-------------:|------:|--------:|-------:|----------:|------------:|
| OldGump | 13,308.29 ns | 1,059.695 ns | 1,883.608 ns | 14,330.72 ns | 1.000 | 0.00 | 0.1526 | 2400 B | 1.00 |
| DynamicLayoutGump | 13,357.86 ns | 129.144 ns | 226.185 ns | 13,323.60 ns | 1.029 | 0.17 | - | 48 B | 0.02 |
| StaticLayoutDynamicStringsGump | 6,653.10 ns | 81.815 ns | 143.292 ns | 6,617.45 ns | 0.514 | 0.09 | - | 40 B | 0.02 |
| StaticLayoutGump | 86.33 ns | 0.760 ns | 1.350 ns | 86.07 ns | 0.007 | 0.00 | 0.0020 | 32 B | 0.01 |
```
# Non-Breaking Changes
* All gump components in the core have been moved to `Gumps/Legacy`.
* All legacy gumps will still inherit `Gump`, which now inherits `BaseGump`
# Special Thanks
Thank you to @stefanomerotta for considerable contributions/benchmarking/testing to make this effort a reality! We collectively went through over 10 iterations, but it is finally ready.
### Summary
- Fixes `[AdvancedSearch` being accessible by players 😱
- Adds `[GenCommands` to generate the same commands html page on https://muo.gg/commands.
- Fixes `[helpinfo` so all commands properly show up!
> [!WARNING]
> ### Developer Warning:
> Commands must now be registered in the `Configure` bootup phase.
> If a command is not registered early enough, it may not be available to systems like [helpinfo
> that cache their information.
> [!NOTE]
> ### Developer Note:
> Various commands related to generating content have been changed to _Developer_ and above access level.
### Screenshots
<img width="673" alt="image" src="https://github.com/modernuo/ModernUO/assets/3953314/b105b5c9-5eb4-4ace-93ff-1bfb31e7132f">
<img width="547" alt="image" src="https://github.com/modernuo/ModernUO/assets/3953314/e97487e8-47a5-4aa7-89cc-9fe3deda584d">
## Breaking Changes
* The Firewall and IP Limiter have been rewritten. Please read the notes carefully!
* `TcpServer.Instances` moved back to `NetState.Instances` - sorry - it was stupid to move it to begin with.
> [!Note]
> Sockets that fail the IP Limiter or Firewall will be immediately and forcibly disconnected.
> This means they will be stuck at "Verifying account..." if it was a real client.
### Summary
- Removes firewall wildcard support.
- Removes `AccessRestrictions`.
- Moves Firewall/IPLimiter to the core.
- Moves `TcpServer` to its own thread.
- Removes the `SocketConnect` and `SocketDisconnect` event sinks.
- Moves `Instances` back to `NetState.Instances`.
- Fixes a long standing bug with bad handling of duplicate listener addresses.
#### Firewall
The firewall has been completely rewritten. There is now an "Admin Firewall" which saves to the config file. Secondarily, there is an internal firewall used exclusively by the TcpServer while processing sockets. The Admin firewall mirrors it's additions/deletions to the internal firewall by adding requests to a queue.
> [!IMPORTANT]
> **Wildcard firewall entries, such as `X`, `*`, `?` are not allowed.**
> **Ranges in between IP classes or sextets are not allowed.**
> **Please make sure to use one of the following:**
> * IP Address - `192.168.1.1`
> * CIDR - `192.168.1.0/24`
> * Range - `192.168.1.1-192.168.1.100`
#### IP Limiter
The IP Limiter has been completely rewritten. The available configurations are:
```json
"ipLimiter.enable": "True",
"ipLimiter.maxConnectionsPerIP": 10,
"ipLimiter.clearConnectionAttemptsDuration": "00:00:00:10",
"ipLimiter.clearThrottledDuration": "00:00:02:00",
```
The IP Limiter is set up to prevent spamming connections from the same IP. Every time an IP connects, it is added to a connection list. After 10 attempts, the IP is added to the throttle list. To keep the system fast, the connection list is entirely wiped every 10 seconds, and the throttle list is entirely wiped every 2 minutes.
### Summary
* Fixes syntax compile error when THREADGUARD is enabled.
* Removes `int packetLength` from incoming packet handles since they aren't needed.
### Developer Notes
Incoming packet handler `SpanReader` is now properly scoped to that packet by length.
### Summary
* Refactors getting static/multi tiles to not use allocations.
* `TileList` is now only used during bootstrapping and uses rented buffers to eliminate extra allocations.
* Replaces `StaticTile[] GetStaticTiles` with:
```cs
Map.StaticTileEnumerable GetStaticTiles(int x, int y);
Map.StaticTileEnumerable GetStaticAndMultiTiles(int x, int y);
Map.StaticTileEnumerable GetMultiTiles(int x, int y);
```
* Removes `Synchronized` and `lock` from TileMatrix. It is no longer considered a multi-thread safe system.
## BREAKING CHANGE
- Deletes `map.GetObjectsInRange` and `map.GetObejctsInBounds`
### Notes
Developers are expected to enumerate mobiles and items separately now using `map.GetMobilesInRange` and `map.GetItemsInRange`. This helps keep the code streamlined so we don't have to maintain multiple copies of ref struct enumerators that do the same thing.
### Fixes
- [X] Fixes bug with planks closing
- [X] Fixes issue with iterating items/mobiles from a null map
## Breaking Changes
Incoming packet registration signature has changed to:
```cs
delegate* void OnReceiveCallback(NetState state, SpanReader reader, int packetLength);
IncomingPackets.Register(int packetID, int length, bool ingame, OnReceiveCallback onReceive);
```
For example, an incoming packet handler signature would now look like this:
```cs
public static void SomeIncomingPacket(NetState state, SpanReader reader, int packetLength)
{
// Parse the data
}
```
## Summary
Updates the network Pipe class to use a mirrored memory technique. This technique involves mapping the same physical memory to two contiguous virtual memory spaces so the byte buffer appears duplicated. This allows writing to a double-sized array to wrap around without the need for the `CircularBuffer` classes.
In practice this allows us to use `Span<byte>` as if the buffer was a regular array.
### Bug Fixes
- [X] Fixes bad fixed length string parsing
### Summary
- Removes Fastwalk system
- Removed the following settings:
- `movement.enableFastWalkPrevention`
- `movement.fastwalkExemptionLevel`
- Adds movement throttle system.
- Adds the following settings:
- `movement.throttleReset` - Default value is `1000` (1 second).
- `movement.throttleThreshold` - Default value is `400` (400ms).
### Movement Throttling
This new system will trigger if a player requests 400ms (configurable) worth of movements quicker than wall clock time. When this happens, the player is throttled (all incoming packets to the server are halted) until wall clock time catches up with the requests. Upon each throttle, the player receives enough credit to handle up to 400ms of "lag" as a grace/catch-up.
### Developer Notes
We use two throttle queues to prevent an infinite loop.
## MAJOR CHANGE (API BREAKING)
Moved the virtues to it's own system _VirtueSystem_. This should make it easier to extend or remove the virtue system. Virtues will be saved to a new folder called _Virtues_.
### Motivation
The motivation was also two-fold, performance/stability, and to fix bugs.
First, virtues is the second system (first is murders), that has a pre-world-save check on _every mobile in the game_ to atrophy virtue stats. This is taxing since it freexes the world and makes world saves take longer. Every mobile had Gain/Loss dates for each virtue, whether they needed them or not. Most players don't even use the virtue system, so this will increase performance considerably.
Second, when I tried to optimize/refactor the code, I found several bugs that needed to be fixed.
### Major API Changes
- [X] The properties on players related to virtues are gone. Use `pm.GetVirtues()?.<PropertyName>` instead.
- [X] Virtues were removed from non-player Mobiles.
- [X] `pm.JusticeProtectors` was removed. Use `JusticeVirtue.GetProtector()` or `JusticeVirtue.GetProtected()` instead.
### Screenshots
<img width="221" alt="Props-1" src="https://github.com/modernuo/ModernUO/assets/3953314/5c09cb83-b8d5-44a2-b899-a7ed7cd736ac">
<img width="220" alt="props-2" src="https://github.com/modernuo/ModernUO/assets/3953314/aeade4d3-8df0-47bd-955a-a864d0946cf7">
**Only one functional change**
* Fixes a bug in LogFactory where `Warning` is being logged as `Information`
Non-functional changes:
* Updates/Fixes copyright headers
* Removes namespace scopes for core files.
View with [whitespace off](https://github.com/modernuo/ModernUO/pull/1187/files?w=1).
Fixes an issue with DropReq where an old client was sending in 14 bytes, but the server was expecting 15 bytes.
To fix this we introduced a new packet handler, `ContainerGridPacketHandler` and changed the code to determine the length of the packet dynamically using `GetLength(NetState)`.
Also fixed throttling so dropped packets are properly skipped.
