## Problem
Items dropped on the ground never decay. Corpses do, which makes the breakage look selective — but corpses are unaffected only because `Corpse.BeginDecay` runs its own `InternalTimer` and never touches `DecayScheduler`. Ordinary items are the only things that depend on the scheduler.
## Root cause
`Item.MoveToWorld` called `SetLastMoved()` — which triggers `UpdateDecayRegistration()` — at the *top* of the method, before detaching the item from its parent and before assigning the new map. `CanDecay()` reads `Decays`, `Parent`, **and** `Map`, so registration was evaluated against the item's *pre-move* state.
Because the `Item` constructor sets `m_Map = Map.Internal`, and `Mobile.Lift` calls `item.Internalize()` to put an item on the cursor, registration was consistently one step behind:
| State | Tracked for decay? | |
|---|---|---|
| Item on the ground | **No** | never decays |
| Item held on the cursor | **Yes** | backwards |
Nothing corrected it afterwards: the later `m_Map = map` assigns the field directly, bypassing the `Map` property setter, and that setter does not refresh registration either. With no parent, `RemoveItem` (which *does* re-register) never runs.
World load masked this — `ItemPersistence.PostDeserialize` re-registers every item against its final state, so decay appears to work for items that survive a restart. Only freshly dropped items are affected.
**Fix:** stamp `LastMoved` up front so decay math stays correct, then call `UpdateDecayRegistration()` once the parent, map, and location are final.
## Audit of the rest of the call sites
All 16 `SetLastMoved()` call sites were reviewed. `SetLastMoved()` must keep refreshing registration — `LastMoved` feeds `ScheduledDecayTime` and therefore which bucket an item belongs in — but it may only run once parent/map are final. The vendor, house, lift and drop sites already satisfy that. The rest of this PR fixes the ones that did not, plus what the audit turned up:
- **`Item.Deserialize`** stamped via `SetLastMoved()` before the version data was read, registering against an unread `Map`/`Parent`. Safe only by accident (the `Item(Serial)` ctor leaves flags at 0, so `Decays` is false), and it cost an unregister per item per world load. Now stamps only; `PostDeserialize` does the registration.
- **`Item` constructor** registered then immediately unregistered every item — the `Movable` setter saw `m_Map` still null, so `CanDecay()` was true. Also removes a `Configure`-order landmine: constructing an `Item` before `DecayScheduler.Configure()` would have thrown in `Shared.Start()`.
- **`Container.Destroy`** stamped `LastMoved` immediately before `MoveToWorld`, which now stamps it itself.
- **`Unregister` was documented O(1)** but scanned twelve buckets and did a linear `PriorityQueue.Remove`, on every construction, deserialize and move. Items now record where they are tracked in `Item.DecaySlot` (1 byte), so untracked items — the common case — leave in O(1).
- **A refused decay silently dropped the item.** `ProcessActiveQueue` deleted on `OnDecay() == true` but did nothing when a region refused, leaving the item dequeued, untracked and on the ground forever. It now restarts the decay clock; re-registering as-is would spin, since `ScheduledDecayTime` is already past.
## Two content bugs of the same class
The decay system replaced a polling sweep. Under polling, a `Decays`/`DecayTime` override could read live state every pass. Under a registration model it cannot — the scheduler drops items that stop being eligible, but nothing enrols one that becomes eligible while untracked.
- **`TreasureChestLevel1-4`** overrode `DecayTime` as `Utility.Random(15, 60)` — a fresh roll on every read. `ScheduledDecayTime` is read repeatedly (to bucket, to re-bucket on rotation, to test whether due), so those reads disagreed: the chest re-bucketed every tick and decayed early instead of after its intended interval. Now rolled once per chest. Distribution unchanged — `Utility.Random(from, count)` is RunUO's `from + Next(count)`, so this is 15–74 minutes, as before.
- **`StrongBox`** overrode `Decays` with a live check on `_house`, `_owner.Deleted` and `IsCoOwner`. Nothing notifies the box when any of those change, so it was never enrolled and the override never decayed anything — and it could not have: `HouseRegion.OnDecay` refuses a secured item inside a standing house, and the box is in `Secures`. Decay was never the mechanism here.
- A strongbox is only ever its owner's. Without a house, or without an owner still co-owning that house, it would be a free container anyone could loot, so `Validate()` destroys it. The old check missed exactly those two cases — it required a non-null owner and treated a null house as valid. A deleted owner deserializes back as null, which `IsCoOwner` rejects. The now meaningless `Decays`/`DecayTime` overrides and an unhelpful `Console.WriteLine` are gone.
`DecayScheduler` now documents both constraints.
## Tests
`DecayRegistrationTests` (Server) covers world placement, lift/drop, container round-trip, cursor-held (must *not* track), `Container.Destroy` spill, `DecaySlot`/structure agreement, refused decay, and a full decay lifecycle driven through the scheduler. `TreasureChestDecayTests` (UOContent) locks `DecayTime`/`ScheduledDecayTime` stability across all four chest levels.
To make the lifecycle testable deterministically, `DecayScheduler` gains `internal` members (visible only via existing `InternalsVisibleTo`): `IsRegistered()`, `ProcessTick(now)` — extracted from `OnTick()` with no behaviour change — and `ResetForTests()`.
Red/green verified. Without the `MoveToWorld` fix, 5 of 6 of the original tests fail, including `ItemOnGround_ActuallyDecaysAfterDecayTime`, which shows a ground item never decays even after a full simulated hour. Without the chest fix, 8 of 8 chest tests fail. Without the refused-decay fix, that test fails.
Server.Tests 737/737 and UOContent.Tests 509/509 pass.
## The bug
#2522 rewrote the outgoing huffman table in `NetworkCompression.cs` and transposed symbol `0x19`'s code from `0x1CE` to `0x12E` (both 9 bits, so the length distribution — and the Kraft sum — stayed valid, which is why nothing obvious tripped).
The real damage is that it broke prefix-freeness. `0x12E` is `100101110`, and symbol `0x0D`'s 8-bit code is `10010111` — a proper prefix of it. The client's decoder walks the tree bit by bit, so it hit a valid leaf at `0x0D` after 8 bits, emitted the wrong byte, and then reframed every subsequent code.
That is exactly what the reporter's capture shows. Server sends `BF 00 0C 00 19 02 00 00 00 01 00 00`; the client's post-decompression stream reads `BF 00 0C 00 0D 55 00 00 01 00 00` — the literal `0D` is the mis-decoded `0x19`, and the packet is now one byte short, so framing desyncs from there on.
## Impact
Any outgoing packet with byte `0x19` anywhere in its body (serials, coordinates, hues, lengths, text) corrupted the stream. Because the desync is in framing rather than a single field, the client silently stops applying server updates while still being able to send — no disconnect, no error.
`StatLockInfo` (`0xBF` subcommand `0x19`) is sent during login, so it reproduces on essentially every connection. This is also #2526: "can only walk a few steps, then the client stops responding" is the same desync, not a VPS sizing problem.
## Fix
One entry, restored to the canonical value:
```diff
- 0x9, 0x191, 0x9, 0x12E, 0x7, 0x03F, ...
+ 0x9, 0x191, 0x9, 0x1CE, 0x7, 0x03F, ...
```
## Validation of the whole table
Rather than eyeball 257 entries, I diffed the current table against **every revision of it in this repo's history** — all 34, back through the renames to the original import. All 34 agree with each other, and `0x19` is the sole disagreement with #2522's rewrite. No other entry has ever changed.
I also validated the table structurally: all 257 lengths in `[2,11]`, every value fits its declared bit-length, Kraft–McMillan sum exactly 1, and no code is a prefix of any other. It passes on all counts now, and the prefix check is what located the bug in the first place.
Both checks were one-off validation scripts, not committed — see below.
## Test
A single known-answer test (`~10ms`) that compresses all 256 symbols and asserts the exact output bytes. The expected bytes were generated from the canonical table, *not* from the implementation, so the test isn't circular. Any single wrong table entry changes the output, so it pins all 256 entries plus the terminal code, and it exercises the encoder end to end.
A round-trip test would **not** catch this class of bug — encoder and decoder built from the same table agree with each other even when the table is wrong. The contract being violated is with the client's hard-coded tree, so the expected bytes have to come from outside the implementation.
The structural prefix-free check and a second `StatLockInfo` vector were deliberately dropped after they'd served their purpose: the table is now verified and effectively frozen, so the structural check was guarding a constant, and the `StatLockInfo` vector is a strict subset of the all-symbols one. What remains covers the risk that's still live — `Compress` is a hand-unrolled bit-packing loop that will get optimized again, and this is the guard against that rewrite silently corrupting the wire format, which is precisely what happened here.
Verified the test fails when the bug is reintroduced and passes when fixed. Full `Server.Tests` suite green: 727 passed.
## At a glance
```csharp
public override void GetProperties(IPropertyList list)
{
base.GetProperties(list);
// Accumulate any number of free-text lines. On dispose the block flushes via
// AddChunked, splitting across as many OPL properties as needed so none can
// overflow the legacy 2D client's per-property buffer (which would crash it).
using var block = list.TextBlock();
if (luck > 0)
{
block.Add($"Luck Bonus: +{luck}%"); // zero-alloc interpolation
}
block.Add("Cannot be repaired".AsSpan()); // plain text, no string allocation
// Already holding a '\n'-joined string? Skip the builder and chunk directly:
// list.AddChunked(description);
}
```
## What
Adds a safe path for emitting **variable-length, free-form (non-cliloc) tooltip text**:
- **`ObjectPropertyList.Add(ReadOnlySpan<char>)`** overloads — append raw text with no string allocation. Makes the old single-arg `Add(string)` redundant (a `string` binds to the span overload implicitly), so it's dropped.
- **`AddChunked(ReadOnlySpan<char>)`** on `IPropertyList` — splits newline-joined text at `\n` boundaries across as many passthrough-cliloc properties as needed, so no single property exceeds the cap.
- **`OplTextBlock`** (`ref struct`) + **`IPropertyList.TextBlock()`** — an ergonomic builder that accumulates `\n`-joined lines (with a zero-alloc interpolated `Add($"...")` overload) and flushes via `AddChunked` on dispose. Usage: `using var block = list.TextBlock();`.
- **`MaxArgumentLength` (504)** — per-property cap with a hard backstop that clamps + logs anything that slips through.
## Why
The legacy 2D client copies each OPL property's text into a fixed ~512-char (1024-byte) buffer. A single property longer than that smashes an adjacent world object's vtable on the client heap and crashes the client. `AddChunked`/`OplTextBlock` keep multi-line content safely under the cap instead of risking one oversized `Add`.
## Docs
- `dev-docs/property-lists.md` — new "Multi-Line Free Text" deep-dive section; corrected the stale `IPropertyList` listing.
- `dev-docs/claude-skills/modernuo-property-lists.md` — condensed pattern + anti-pattern.
## Tests
9 tests pass (`OplTextBlockTests`, `ObjectPropertyListSpanAddTests`): line joining, empty-line skipping, no-line no-op, zero-alloc interpolation, and long-content chunking staying under `MaxArgumentLength`. Full `UOContent` build is green, confirming dropping `Add(string)` breaks no call sites.
## Summary
`Rectangle3DConverter.Write` corrupts a rectangle's Z range for certain bounds. The omit-z guard was:
```csharp
var writeZ = value.Start.Z is > sbyte.MinValue and < sbyte.MaxValue
|| value.End.Z is > sbyte.MinValue and < sbyte.MaxValue;
```
This drops `z1`/`z2` whenever **both** Z bounds sit at/outside the sbyte extremes — but `Read` reconstructs absent Z as exactly `z1 = -128, z2 = 127` (depth 255). So any rectangle that trips the omit condition without *being* that sentinel round-trips to depth 255 and is corrupted.
The concrete case: a **homeRange-style** bound `Start.Z = -128, End.Z = 128` (depth 256, the full vertical range used by spawners) gets `z1`/`z2` omitted on write, then reads back as depth **255** — silently losing the top z-level on every re-serialize.
(Spotted while working on #2505; spawners now prefer the `homeRange` form so most square bounds avoid this path, but any non-square `spawnBounds` or other `Rectangle3D` JSON is affected.)
## Fix
Omit Z only for the exact sentinel `Read` produces (`z1 == -128 && z2 == 127`); write it for anything else:
```csharp
var writeZ = value.Start.Z != sbyte.MinValue || value.End.Z != sbyte.MaxValue;
```
`Read` is unchanged, so existing `regions.json` rectangles that omit Z keep loading identically.
## Tests
New `Rectangle3DConverterTests`: round-trips the homeRange depth-256 case, the depth-255 sentinel, and ordinary/edge z values; asserts the sentinel omits Z while homeRange bounds write it. Server.Tests 717/717, UOContent.Tests 487/487.
## Summary
Removes the dated `DynamicJson` JSON helper and migrates spawner JSON (de)serialization to a polymorphic `record SpawnerDto` hierarchy. `DynamicJson` was the last remaining consumer (regions moved off it in #1400).
The key correctness improvement: **System.Text.Json deserializes plain DTO records, never a live `Item`.** Previously, deserializing directly into an `Item` meant STJ constructed world-registered objects *before* the data was validated — a malformed/hand-edited spawn file could leave orphaned spawner Items in the world save. Now a parse failure is GC-only; `dto.ToSpawner()` constructs the spawner only from a fully-validated DTO and self-cleans on failure.
## What changed
- **New:** `SpawnerDto` (abstract) + `SpawnerDataDto` / `RegionSpawnerDto` / `ProximitySpawnerDto`, each marked with a reusable `[JsonDiscoverableType]` opt-in attribute. Auto-discovered at the `Configure` phase — no manual registration list (avoids the regions `Register<T>()` footgun), open to custom spawner subtypes.
- **Symmetric mapping:** `BaseSpawner.ToDto()` (export) ⇄ `SpawnerDto.ToSpawner()` (import). `ToSpawner()` deletes-and-rethrows on any failure, so the importer can never orphan an Item.
- **`SpawnerJsonSerializer`** wires `$type` polymorphism on the `SpawnerDto` root with loud collision/constructibility validation.
- **Import/export commands** rewired to the typed DTO path (reflection `FindTypeByName`/`CreateInstance` removed).
- **Data migration:** the 109 `Distribution/Data/Spawns/**` files moved from `"type"`→`"$type"` and legacy `homeRange`→`spawnBounds`. The runtime still *reads* legacy `homeRange` for external files. The `homeRange→spawnBounds` formula is proven equivalent to the runtime conversion (`BoundsEquivalenceTests`, hr=0/1/3/7).
- **Deleted:** `Projects/Server/Json/DynamicJson.cs`.
Sparse export output matches the legacy `ToJson` (nullable DTO properties + `WhenWritingNull`). Binary world-save serialization is untouched.
## Tests
- DTO round-trip per spawner type; sparse-default omission; legacy `homeRange` read; export/import file round-trip.
- `Import_MalformedFile_LeaksNoWorldItems` — proves a mid-array parse failure constructs zero world Items.
- `AllSpawnFilesLoadTests` — every migrated spawn file deserializes and builds.
- Duplicate-discriminator validation.
- UOContent.Tests 485/485, Server.Tests 710/710, build clean.
## Follow-up (not in this PR)
`Rectangle3DConverter.Write` (in `Projects/Server/`) omits `z1/z2` when `Start.Z == -128`, so a future server-side export of a `homeRange`-style spawner round-trips depth 256→255. Pre-existing and out of scope here (Server change); the migrated data reads correctly. Worth a separate small converter PR.
Fixes#2462
## Summary
Removes the per-object `VirtualHairInfo` heap wrapper for mobile/corpse hair. Hair is now stored **inline** on `Mobile` and `Corpse` as `int _hairItemId` / `int _hairHue` plus a lazily-allocated, **non-serialized** ephemeral `Serial _hairSerial` (in the high virtual-serial range) — and likewise for facial hair. The `VirtualHairInfo` class is deleted, with a **lossless** save migration.
This delivers three things:
1. **Fixes a hair-removal bug.** `Delta(MobileDelta.Hair)` is deferred (it enqueues; `ProcessDeltaQueue` runs later in the tick). The old `HairItemID = 0` setter nulled `_hair` *immediately*, so by the time `ProcessDelta` built the remove packet the equipped virtual serial was already gone — the old `??=` code then re-materialized a **fresh** serial (≠ the equipped one), so clients never removed the right entity, and it left a phantom ItemId-0 object behind. The serial now lives on the entity and **persists across removal**, so remove packets carry the correct serial.
2. **Lightens the entity.** No heap hair object; bald mobiles allocate nothing (the serial is minted lazily only when hair is present). This was the original reason `HairItemID`/`HairHue` exist.
3. **Removes `VirtualHairInfo` entirely**, keeping the high-range virtual serial behavior.
## How
- **Mobile** (manual serialization): inline `_hairItemId/_hairHue/_hairSerial` (+facial); lazy `HairSerial`/`FacialHairSerial`; `ProcessDelta` reads those. Serialization **v36 → v37** — the v30-v37 deserialize is unified, reading the legacy per-hair `VirtualHairInfo` version int only when `version < 37`. Setting item id to 0 clears the hue (matching the old object-nulling) while retaining the serial.
- **Corpse** (codegen serialization): decomposed to `[SerializableField] int _hairItemId/_hairHue` (+facial) + ephemeral serial; **v16 → v17** with `MigrateFrom(V16Content)`.
- **Lossless migration:** the loader validates exact byte length, and the old corpse hair is a presence-bool-gated block, so a tiny **migration-only** `LegacyHairInfo` reader (no runtime role) consumes the legacy `[bool][int ver][int itemId][int hue]` bytes. Frozen `Corpse.v14/v15/v16.json` are retyped to it; `v17.json` describes the new int fields.
- All consumers updated to discrete accessors: `OutgoingMobilePackets`, `CorpsePackets`, corpse subclasses (`MilitiaFighterCorpse`, `SchmendrickApprenticeCorpse`), and the packet test mirrors.
- `VirtualHair.cs` renamed to `OutgoingVirtualHairPackets.cs` (the only type left in it after `VirtualHairInfo` was removed).
## Test Plan
- [x] Full solution build: **0 warnings, 0 errors** (`TreatWarningsAsErrors`).
- [x] `Server.Tests`: **708 passed** (incl. new `RemoveHairUsesEquippedSerial` / `RemoveFacialHairUsesEquippedSerial` proving the serial survives removal + hue clears).
- [x] `UOContent.Tests` corpse/hair: **6 passed** (incl. `CorpseHairMigrationTests` asserting the legacy hair bytes are consumed exactly — the loader's length invariant).
- [x] Generated migration code inspected: V14/V15/V16 readers consume the legacy block byte-for-byte; serial never written to disk.
## Upgrade notes
- Old Mobile (v30–v36) and Corpse (v13–v16) saves load losslessly.
- Minor cosmetic-only change: `SchmendrickApprenticeCorpse` hair/facial-hair RNG draws shift order within each pair (same draw count); irrelevant for a quest NPC corpse.
## Summary
Adds a custom `:L` format specifier to `RawInterpolatedStringHandler`. When the format string is `"L"`, the handler lowercases the formatted value's chars in-place after the underlying `ISpanFormattable.TryFormat` / `IFormattable.ToString` path completes. Zero allocation, single-pass.
## Usage
```csharp
mob.SendMessage($"You earned a {rank:L} trophy!"); // "gold"
mob.SendMessage($"Welcome, {playerName:L}"); // lowercased
mob.SendMessage($"{count:L} kills"); // ints unchanged ("42")
```
## Motivation
Eliminates the `value.ToString().ToLowerInvariant()` two-allocation idiom that appears across the codebase for any type that goes through an interpolation handler. After this lands, content code can use the `:L` specifier directly instead of helper extensions or per-enum lookup tables.
## Coverage
- `AppendFormatted<T>(T value, string? format)` — generic path (covers IFormattable, ISpanFormattable, .ToString fallback)
- `AppendFormatted(ReadOnlySpan<char> value, int alignment, string? format)` — span path with alignment-aware lowercase range (only the value range is lowercased, not padding)
- `AppendFormatted<T>(T value, int alignment, string? format)` and `AppendFormatted(string? value, int alignment, string? format)` and `AppendFormatted(object? value, int alignment, string? format)` — inherit via delegation
The `format == "L"` comparison is case-sensitive — `:l` (lowercase L) is NOT recognized. `:L` matches the convention of e.g. `:N0` / `:F2` (numeric format specifiers traditionally use uppercase). `char.ToLowerInvariant` is used (not locale-dependent) for predictable game text.
## Future cleanup
Phase 3.3 (#2438) introduced a per-enum `TrophyRank.LowerName()` extension to eliminate `rank.ToString().ToLower()` allocations at 10 ConPVP sites. Once this PR lands, those sites can be simplified to `{rank:L}` and the `TrophyRankExtensions` helper can be removed. Tracked as a follow-up.
## Summary
Phase 1 of a multi-phase optimization to eliminate intermediate string allocations between `$"..."` interpolation and the packet text region for ModernUO's player-facing message APIs.
- Adds `[InterpolatedStringHandler]` overloads to every `Send*`/`Public/Local/Private/NonlocalOverheadMessage`/`Say`/`Emote`/`Whisper`/`Yell`/`SendLocalizedMessageTo` API in `OutgoingMessagePackets`, `Mobile`, and `Item`. Each overload is a 3-line shim that forwards `handler.Text` to the existing span-based path then calls `handler.Clear()` to return the rented `STArrayPool<char>` buffer (matches the established `SpanWriter.WriteAscii(ref RawInterpolatedStringHandler)` precedent).
- Converts `string text/args/affix/name` parameters to `ReadOnlySpan<char>` for consistency with the handler path. `lang` intentionally stays `string` (it's never interpolated and the `??= "ENU"` fallback stays cleaner).
- Adds `int charCount` overloads of the three `GetMaxMessage*Length` helpers so stackalloc sizing can avoid the redundant `ROS<char>` round-trip.
- Moves `Mobile` (17 methods) and `Item` (4 methods) message methods into new partial-class files (`Mobile.Messages.cs`, `Item.Messages.cs`) for organization.
No UOContent call sites change in this PR — existing `string`/`ROS<char>` calls compile unchanged via implicit conversion. Phase 2 (intermediate-string audit) and Phase 3 (cleanup PRs) follow.
## Files
- `Projects/Server/Network/Packets/OutgoingMessagePackets.cs` — `string` → `ROS<char>` for text params, `int charCount` length helpers added, class made `partial`
- `Projects/Server/Network/Packets/OutgoingMessagePackets.Interpolated.cs` (new) — 3 `ref RawInterpolatedStringHandler` extension overloads
- `Projects/Server/Mobiles/Mobile.cs` — message methods extracted (-262 lines)
- `Projects/Server/Mobiles/Mobile.Messages.cs` (new, 463 lines) — moved + ROS-converted methods + 25 handler overloads
- `Projects/Server/Items/Item.cs` — message methods extracted (-93 lines)
- `Projects/Server/Items/Item.Messages.cs` (new, 142 lines) — moved + ROS-converted methods + 4 handler overloads
- `Projects/Server.Tests/Tests/Network/Packets/Outgoing/MessagePacketTests.cs` — 3 new regression tests verifying byte-equivalence for the handler overloads
## Summary
Removes per-call heap allocations from `Container`'s consume / find / group hot paths and from `BaseCreature.OnDeath`'s fame/karma tracking. The headline wins: kill the `List<List<Item>>` + `Item[][]` + `int[]` grouping bridges in `ConsumeTotal*` / `ConsumeTotalGrouped*` / `GetBestGroupAmount*`, and kill the per-call `Predicate<Item>` allocations in `FindItemsByType(Type)` / `FindItemsByType(Type[])`.
### `Container.cs`
- `ConsumeTotal`, `ConsumeTotalGrouped`, `GetBestGroupAmount` now share four streaming helpers (`HasAmount`, `TryFindGroupMeetingAmount`, `BestGroupTotal`, `ConsumeSlice`) backed by `PooledRefList` instead of allocating per-group lists and jagged arrays. Two-phase validate-then-consume pattern preserved — all-or-nothing semantics for spell reagents, vendor pay, and crafting still hold.
- `(Type)` / `(Type[])` / `(Type[][])` overload trios collapsed to single `ReadOnlySpan<Type>` + `ReadOnlySpan<int>` implementations. Implicit `T[] → ReadOnlySpan<T>` conversion means UOContent callers compile unchanged.
- Unused overloads deleted: `ConsumeTotalGrouped(Type)`, `ConsumeTotalGrouped(Type[][])`, `GetBestGroupAmount(Type)`, `GetBestGroupAmount(Type[][])`, plus the never-called `TryDropItems` hook and its private `ItemStackEntry` struct.
- Fixes a `PooledRefList` leak in `GetBestGroupAmount(Type[], …)` (missing `using`).
- `m_ContainerData` / `m_Items` / `m_TotalGold` / `m_TotalItems` / `m_TotalWeight` / `ContainerData.m_Table` / `ContainerData.logger` renamed to the underscored convention. `m_Items` cross-file rename for the Container-side references in `Item.cs`; `Item.CompactInfo.m_Items` deliberately left alone (separate effort).
- `CheckHold` parent walk simplified; trivial dispatch methods (`CheckHold` overloads, `OnItemAdded`, `OnItemRemoved`, `OnStackAttempt`) get `[MethodImpl(AggressiveInlining)]`; `Destroy` and `DisplayTo` cache `Items` outside the loop; dead comments removed.
### `Item.Enumerable.cs`
- `FindItemsByType(Type)` previously allocated a `Predicate<Item>` per call (method-group conversion). `FindItemsByType(Type[])` allocated a closure capturing `types`. Both now construct the enumerator with a `Type` / `ReadOnlySpan<Type>` field directly, no delegate.
- `FindItemsByTypeEnumerator<T>` gains two constructors plus a `Matches(T)` helper that picks the right filter inline. Constructor chaining via a private 2-arg seed constructor incidentally fixes a pre-existing bug where `PooledRefQueue` was always rented at capacity 0 because `_recurse` hadn't been assigned yet.
- `(Type[])` overload of `FindItemsByType` becomes `(ReadOnlySpan<Type>)`.
- `EnumerateItemsByType(Type)` / `EnumerateItemsByType(ReadOnlySpan<Type>)` / `ListItemsByType(Type)` / `ListItemsByType(ReadOnlySpan<Type>)` simplified to delegate to the new alloc-free overloads instead of filtering manually.
### `Utility.cs`
- `InTypeList<T>(this T, Type[])` and `InTypeList(this Type, Type[])` switched to `ReadOnlySpan<Type>`.
### `BaseCreature.cs`
- `OnDeath` per-death `List<Mobile>` / `List<int>` / `List<int>` for fame/karma tracking switched to `PooledRefList`.
## Summary
- **Add a self-referencing `InterpolationHandler` to `ValueStringBuilder`** that writes directly into the builder's buffer — zero intermediate allocation, works with `stackalloc`-backed builders
- **Replace all `System.Text.StringBuilder` usage** across the codebase with `ValueStringBuilder`
- **Convert `ValueStringBuilder.Create()` to `stackalloc`** at 10 sites where output length is provably bounded
- **Convert manual `Dispose()` to `using var`** where possible, and hoist loop-scoped builders outside loops with `Reset()`
- **Convert verbose `Append()` chains to `Append($"...")`** interpolation for readability
- **Add comprehensive documentation** for string handling patterns
## InterpolationHandler Design
`ValueStringBuilder` is a `ref struct`, which creates challenges for C#'s interpolated string handler pattern:
- **`ref` fields to ref structs are not allowed** (CS9050)
- **`[InterpolatedStringHandlerArgument("")]` passes struct receivers by value**, not by ref
- **`ISelfInterpolatedStringHandler` requires boxing** ref structs into interface fields
**Solution: Copy-and-reconcile pattern.** The handler receives a value copy of the builder. The copy shares the same underlying `char` buffer (`Span` points to the same `stackalloc`/pooled memory), so writes go to the original buffer. `Append()` reconciles by `this = handler._builder`, updating `_length` and any buffer references changed by `Grow()`.
This is safe because:
- The game loop is single-threaded — no concurrent access between handler construction and reconciliation
- If `Grow()` occurs in the copy, the original's stale buffer isn't accessed until `Append()` replaces it
- `Dispose()` correctly returns the reconciled buffer to the pool
## Changes by Category
### ValueStringBuilder (`Projects/Server/Buffers/ValueStringBuilder.cs`)
- Added nested `InterpolationHandler` ref struct with copy-and-reconcile pattern
- Added `Append([InterpolatedStringHandlerArgument("")] scoped ref InterpolationHandler)` method
- Removed `RawInterpolatedStringHandler` overloads (new handler replaces them)
- All `AppendFormatted` overloads delegate to existing `Append` methods (no code duplication)
- Alignment support via direct private field access (nested type privilege)
### StringBuilder → ValueStringBuilder (15 files)
Replaced all `new StringBuilder()` with `ValueStringBuilder.Create()` or `stackalloc`:
- ConPVP games: KingOfTheHill, DoubleDom, CTF, BombingRun, TourneyMatch
- ConPVP infrastructure: Tournament, Participant, TourneyParticipant
- ConPVP gumps: ArenaGump, TournamentBracketGump, AcceptTeamGump, ConfirmSignupGump
- Commands: Handlers, Logging, Add
- Other: TownCrier, SpeechLogGump, TestCenter
Key patterns:
- `sb = new StringBuilder()` reassignment → `sb.Reset()`
- `sb.AppendFormat("{0:N0}", value)` → `sb.Append($"{value:N0}")`
- `sb.Append(x).Append(y)` chains → separate statements (VSB returns void)
### Create() → stackalloc (10 files)
Converted heap-allocated builders to stackalloc where output is bounded:
- ClientVersion (32), MapSelection (160), HouseRaffleStone (48)
- HolySense (96), UnholySense (96), ClientVerification (192)
- AcceptTeamGump (64), ConfirmSignupGump (64)
- BaseWeapon (160), BaseArmor (128)
### Loop optimizations (2 files)
Hoisted `ValueStringBuilder` creation outside loops with `Reset()` per iteration:
- TourneyMatch.cs: `using var` inside for loop → stackalloc before loop
- ArenaGump.cs: `Create()` + `Dispose()` per iteration → stackalloc before loop
### Append chain → interpolation (5 files)
Converted multi-line `Append()` chains to `Append($"...")`:
- BountyMessage.cs: title switch (6 cases), paragraph (15→1 Append), description lines, closing
- AcceptTeamGump, ConfirmSignupGump, TournamentBracketGump: tournament type strings
- AdminGump: comment/tag formatting in loops
### Documentation
- `dev-docs/string-handling.md`: Full reference — construction, interpolation, disposal, decision guide
- `dev-docs/claude-skills/modernuo-string-handling.md`: Claude skill with quick reference
- `CLAUDE.md`: Added rule 17 (no StringBuilder), dev-docs table entry, skills table entry
- `dev-docs/code-standards.md`: Updated memory management section
## Test Plan
- [x] `dotnet build` — 0 errors, 0 warnings
- [x] `dotnet test` — 940/940 tests pass
- [x] 28 ValueStringBuilder tests covering all reconciliation scenarios:
- Stackalloc no-grow, stackalloc with grow (→pool transition)
- Heap no-grow, heap with grow, heap double grow
- Pre-existing content with and without grow
- Sequential multiple `Append($"...")` calls
- Mixed plain + interpolated Append
- Empty interpolation, literal-only, format specifiers
- Null string holes, ISpanFormattable types
- Dispose after stackalloc→pool grow
## Summary
Server-side movement throttle that prevents speed hacking while accurately identifying cheaters with detection of lagging connections.
**Key features:**
- Credit buffer (200ms) absorbs timing jitter from legitimate players
- Movement queue handles larger bursts, draining at proper game-tick intervals
- RTT measurement distinguishes network lag from speed hacks
- Queue depth detection catches ACK-throttled speed hacks (going straight)
## How It Works
**Throttle** (prevention): Movements arriving too early either consume credit or get queued. The queue drains at
correct intervals, so speed hackers can't move faster regardless of what they send.
**Detection** (identification): Combines multiple signals to identify cheaters:
| Signal | What it catches |
|--------|-----------------|
| Queue depth ≥4 sustained | ACK-throttled speed hacks (client limits unacked moves to 5) |
| Movement rate >1.05x | Direction-change speed hacks where timing is visible |
| Stable RTT + high queue | Eliminates false positives from laggy players |
**RTT-Aware Logic:**
- Probes only sent to players actively moving (event-driven, not global loop)
- Stable low-latency + problems = suspicious
- Unstable/high-latency + problems = probably just lag, throttle handles it
## Configuration
```json
{
"movementThrottle.maxCredit": 200,
"movementThrottle.softQueueLimit": 6,
"movementThrottle.hardQueueLimit": 10,
"movementThrottle.debugLogging": false
}
```
> [!IMPORTANT]
> **Breaking Changes**
> - DecodePacket and EncodePacket delegates replaced with IClientEncryption interface
> - NetState.Connection (Socket) replaced with internal RingSocket management
> - NetState.RecvPipe and NetState.SendPipe removed (buffers managed internally)
## Summary
Upgrades the networking stack from PollGroup-based I/O to io_uring, significantly improving I/O performance on Linux.
This also adds native client encryption support for encrypted UO clients.
## Major Changes
io_uring Networking Architecture
- Replaced PollGroup with IORingGroup for async socket I/O operations
- Removed Pipe.cs (mirrored ring buffer) and TcpServer.cs in favor of RingSocketManager
- Added NetState.Network.cs - centralized network infrastructure handling accept, recv, send, and disconnect
completions
- Added SocketHelper.cs - platform-specific socket utilities for raw socket handle operations (getpeername,
getsockname)
- Buffer management now handled by RingSocketManager with configurable slab allocation
### Client Encryption Support
- Added full encryption stack in Network/Encryption/:
- EncryptionConfig.cs - configurable encryption modes (None, Unencrypted, Encrypted, Both)
- EncryptionManager.cs - encryption detection and initialization for login/game packets
- LoginEncryption.cs - handles login packet encryption with version-derived keys
- GameEncryption.cs - handles game server encryption using Twofish
- TwofishEngine.cs - optimized Twofish block cipher implementation
- LoginKeys.cs - encryption key table for client versions
- IClientEncryption.cs - interface for client encryption implementations
### NetState Improvements
- Replaced Socket Connection with RingSocket _socket for managed socket lifecycle
- Changed from GCHandle polling to event-based completion processing
- Disconnect handling now properly waits for pending sends to flush
- Simplified connecting socket management using lazy queue removal
### Configuration
- New settings: network.encryptionMode and network.encryptionDebug
- Encryption mode flags: Unencrypted, Encrypted, or Both
### Dependencies
- Replaced PollGroup NuGet package with IORingGroup
- Linux requires liburing-dev / liburing-devel package
### Test plan
- Verify server starts and accepts connections on Linux with io_uring
- Verify server starts and accepts connections on Windows (fallback to IOCP)
- Test unencrypted client connections (ClassicUO with encryption disabled)
- Test encrypted client connections if available
- Verify graceful disconnect flushes pending data
- Confirm CI builds pass on all target platforms
## Summary
- Adds proper Latin1 encoding support, replacing CP1252 usage throughout the codebase
- Adds specialized, optimized string decoding methods with safe string filtering for each encoding type
- Filters invalid Unicode characters (C0/C1 control codes, non-characters) by removal rather than replacement since
the UO client renders nothing for these characters
- Fixes UTF-16 null terminator position handling to correctly advance by 2 bytes
## Changes
TextEncoding.cs
- Added SearchValues-based invalid byte/char detection for efficient filtering
- Added encoding-specific GetString methods: GetStringAscii, GetStringLatin1, GetStringUtf8, GetStringBigUni,
GetStringLittleUni
- Each method supports a safeString parameter for filtering invalid characters
- Little-endian UTF-16 uses direct memory cast for zero-copy decoding on LE systems
- Invalid characters are removed (not replaced with U+FFFD) since the client renders nothing for them
SpanReader.cs
- Added ReadLatin1() and ReadLatin1Safe() methods
- Rewrote encoding-specific read methods to use optimized TextEncoding.GetString* methods
- Fixed UTF-16 null terminator handling: position now correctly advances by byteLength (2) instead of 1
SpanWriter.cs
- Added WriteLatin1 and WriteLatin1Null methods
## Packet Updates
- Updated all packet code to use Latin1 encoding instead of CP1252
- Affected: account packets, equipment packets, menu packets, message packets, mobile packets, player packets, secure
trade packets, vendor packets, gump packets, book packets, mahjong packets
## Filtering Behavior
Invalid characters filtered in safe mode:
```
┌───────────────┬────────────────────────┐
│ Range │ Description │
├───────────────┼────────────────────────┤
│ 0x00-0x1F │ C0 control codes │
├───────────────┼────────────────────────┤
│ 0x7F │ DEL │
├───────────────┼────────────────────────┤
│ 0x80-0x9F │ C1 control codes │
├───────────────┼────────────────────────┤
│ 0xFFFE-0xFFFF │ Unicode non-characters │
└───────────────┴────────────────────────┘
```
Note: Surrogate pairs (0xD800-0xDFFF) are not filtered because proper validation requires context checking for paired
vs unpaired surrogates. The UO client renders nothing for these anyway.
## Test Plan
- All 631 Server.Tests pass
- Verified client rendering behavior using TestUnicodeGump command (pages 1-5)
- Confirmed U+FFFD, unpaired surrogates, and non-characters all render as blank in client
- Verified Latin1 characters (0xA0-0xFF) display correctly
- Verified C1 control codes (0x80-0x9F) are filtered and don't display
### Summary
- Create BitMask256 struct with scalar operations (benchmarks showed AVX2 vectorization provides no benefit for this size)
- Refactor Map.cs to use BitMask256 for full Z range support (-128 to 127)
- Remove SectorSpawnCache struct, use BitMask256 directly in manager
- Update tests to use BitMask256 directly
- Remove unused test assertions for old 64-bit behavior
### Summary
- Adds CanSpawnMobile(x, y, minZ, maxZ, canSwim, cantWalk, out spawnZ) overload for finding spawn surfaces within a Z range
- Adds CanSpawnItem(x, y, minZ, maxZ, out spawnZ) for item spawning with Surface+Impassable support (tables, furniture)
- Uses bitmask optimization inspired by Item.DropToWorld's m_OpenSlots pattern for O(1) surface/blocker checks
- HomeRange spawners now use surface detection to set proper Z bounds
### Key Changes
Map.cs:
- CanSpawnMobile with Z-range finds lowest valid surface for mobiles
- CanSpawnItem with Z-range finds lowest valid surface for items (including tables)
- CanFitItem for point-check item placement on Surface+Impassable tiles
- Bitmask approach eliminates nested loops and stackalloc arrays
Spawners:
- Simplified GetSpawnPosition using new Z-range methods
- HomeRange setter detects surface below spawner for proper Z bounds
- Consistent handling for mobiles and items
### Bug Fixes
- Water tiles (Impassable | Wet) no longer block swimming mobs
- Items can now spawn on tables/furniture (Surface+Impassable)
### Test Plan
- Run dotnet test - 631 tests pass
- Manual testing: multi-story spawning, water mobs, item spawning on tables
- Verify HomeRange spawner movement shifts bounds correctly
### Summary
Adds `XInRangeByDistance` and `XInBoundsByDistance` methods to `Map.cs`:
**Item Distance Enumeration:**
```cs
ItemDistanceEnumerable<Item> GetItemsInRangeByDistance(Point3D p);
ItemDistanceEnumerable<Item> GetItemsInRangeByDistance(Point3D p, int range);
ItemDistanceEnumerable<T> GetItemsInRangeByDistance<T>(Point3D p) where T : Item;
ItemDistanceEnumerable<T> GetItemsInRangeByDistance<T>(Point3D p, int range) where T : Item;
ItemDistanceEnumerable<Item> GetItemsInRangeByDistance(Point2D p);
ItemDistanceEnumerable<Item> GetItemsInRangeByDistance(Point2D p, int range);
ItemDistanceEnumerable<T> GetItemsInRangeByDistance<T>(Point2D p) where T : Item;
ItemDistanceEnumerable<T> GetItemsInRangeByDistance<T>(Point2D p, int range) where T : Item;
ItemDistanceEnumerable<Item> GetItemsInRangeByDistance(int x, int y, int range);
ItemDistanceEnumerable<T> GetItemsInRangeByDistance<T>(int x, int y, int range) where T : Item;
ItemDistanceEnumerable<Item> GetItemsInBoundsByDistance(Rectangle2D bounds, , bool makeBoundsInclusive = false);
ItemDistanceEnumerable<T> GetItemsInBoundsByDistance<T>(Rectangle2D bounds, bool makeBoundsInclusive = false) where T : Item;
```
**Mobile Distance Enumeration:**
```cs
MobileDistanceEnumerable<Mobile> GetMobilesInRangeByDistance(Point3D p);
MobileDistanceEnumerable<Mobile> GetMobilesInRangeByDistance(Point3D p, int range);
MobileDistanceEnumerable<T> GetMobilesInRangeByDistance<T>(Point3D p) where T : Mobile;
MobileDistanceEnumerable<T> GetMobilesInRangeByDistance<T>(Point3D p, int range) where T : Mobile;
MobileDistanceEnumerable<Mobile> GetMobilesInRangeByDistance(Point2D p);
MobileDistanceEnumerable<Mobile> GetMobilesInRangeByDistance(Point2D p, int range);
MobileDistanceEnumerable<T> GetMobilesInRangeByDistance<T>(Point2D p) where T : Mobile;
MobileDistanceEnumerable<T> GetMobilesInRangeByDistance<T>(Point2D p, int range) where T : Mobile;
MobileDistanceEnumerable<Mobile> GetMobilesInRangeByDistance(int x, int y, int range);
MobileDistanceEnumerable<T> GetMobilesInRangeByDistance<T>(int x, int y, int range) where T : Mobile;
MobileDistanceEnumerable<Mobile> GetMobilesInBoundsByDistance(Rectangle2D bounds, bool makeBoundsInclusive = false);
MobileDistanceEnumerable<T> GetMobilesInBoundsByDistance<T>(Rectangle2D bounds, bool makeBoundsInclusive = false) where T : Mobile;
```
**Client Distance Enumeration:**
```cs
ClientDistanceEnumerable GetClientsInRangeByDistance(Point3D p);
ClientDistanceEnumerable GetClientsInRangeByDistance(Point3D p, int range);
ClientDistanceEnumerable GetClientsInRangeByDistance(Point2D p);
ClientDistanceEnumerable GetClientsInRangeByDistance(Point2D p, int range);
ClientDistanceEnumerable GetClientsInRangeByDistance(int x, int y, int range);
ClientDistanceEnumerable GetClientsInBoundsByDistance(Rectangle2D bounds, bool makeBoundsInclusive = false);
```
**Example Usage:**
How to use `minDistance` to terminate early when all subsequent mobiles in the iteration will be at an increasing min distance.
```csharp
var playerLocation = player.Location;
const int maxRange = 100;
const int maxMobiles = 12;
var closestMobiles = new SortedSet<Mobile>(Comparer<Mobile>.Create((x, y) =>
{
var distX = x.GetDistanceToSqrt(playerLocation);
var distY = y.GetDistanceToSqrt(playerLocation);
int result = distX.CompareTo(distY);
if (result == 0)
{
result = (x?.Serial ?? Serial.MinusOne).CompareTo(y?.Serial ?? Serial.MinusOne);
}
return result;
}));
int lastMinDistance = 0;
foreach (var (mobile, minDistance) in map.GetMobilesInRangeByDistance(playerLocation, maxRange))
{
// Stop if we have enough and distance starts increasing
if (closestMobiles.Count >= maxMobiles && minDistance > lastMinDistance)
{
break;
}
closestMobiles.Add(mobile);
lastMinDistance = minDistance;
}
// Results are already ordered by proximity
foreach (var mobile in closestMobiles)
{
var actualDistance = mobile.GetDistanceToSqrt(playerLocation);
Console.WriteLine($"{mobile.Name}: ActualDist={actualDistance:F2}");
}
```
> [!IMPORTANT]
> **Dev Note:** This is an **important** patch as the bug could lead to major issues like:
> * Multis/Players disappearing from view or not being counted during game logic.
> * World processes (e.g., area checks, targeting) failing to detect entities correctly.
> * General stability and correctness concerns for core map functionality.
>
> **Important Breaking Change**: Multis now properly use the map link list. This means modifying a multi while iterating will cause the server to crash. The crash _is expected_. Please modify/fix code accordingly to create a list using `PooledRefQueue` or `PooledRefList` instead of moving/deleting multis while inside the foreach.
### Summary
* Fixes a bug where deleting/moving a multi (boat/house) in some circumstances can use undefined behavior due to unsafe changes to List<BaseMulti>
* Fixes a bug where Multis may not be considered while searching due to a bug causing the sector search to end early.
### Summary
Fixes a few minor issues with timers:
- Timer.Delay and Timer.Interval was not reflecting the actual tick time (aligned to the next 8ms)
- Negative delay values were causing a crash when DateTime.Now - delay was below DateTime.MinValue
- Timer.Next now reflects the correct wall clock tick time based on the adjusted Delay.
- Timer.Next is not assigned when the timer is started. This was important for timers that were created, but started later.
### Summary
- `GenericEntityPersistence` is now a type of `GenericPersistence`. This allows developers to serialize both entities and non-entities in the same system. 🎉
- Each `SerializationThreadWorker` now allocates 1MB of heap for serialization _permanently_. If more memory is needed, that thread will double it's memory, not to exceed increments of 64MB.
- Several bugs with serialization introduced with the pure MMF implementation have been fixed.
- `BinaryFileReader` has been added back. 🎉
- Adds `world.useMultithreadedSaves` to allow disabling threaded saves.
> [!IMPORTANT]
> **Developer Note**
> The split file serialization has been deprecated and is no longer used. We have effectively gone back to the same file writing we had before the pure MMF implementation.
> [!Important]
> **Developer Note**
> This code change will **completely move gumps out of the core**
### Summary
- Adds `GetGumps()` convenience which exposes methods to Find/Close/Send multiple gumps. This helper is a performance improvement by eliminating the Dictionary<Player, List> lookup for gumps.
### Summary
* Added World.NewVirtual for creating virtual serial numbers
* Reserved range 0x7EEEEEEE to 0x7FFFFFFF for virtual serials
* Hair and Facial hair (for mobiles) now use virtual serials instead of FakeSerial() functions
* Consolidated virtual hair to a single `VirtualHairInfo` class.
Corpse hair and facial hair now persists across save/load and hair and facial hair no longer teleport to newest corpse.
## Summary
- Removes allocation of a `List<ContextMenuEntry>` every time a context menu is created.
- Moves packet/context menu creation logic out of the core
- Fixes tame entry
## BREAKING CHANGE
> [!Important]
> **Developer Note**
> ```cs
> public virtual void GetContextMenuEntries(Mobile from, List<ContextMenuEntry> list)
> ```
> and similar functions changed to
> ```cs
> public virtual void GetContextMenuEntries(Mobile from, ref PooledRefList<ContextMenuEntry> list)
> ```
### Summary
Updates the serialization strategy to use `MemoryMappedFile` instead of thick buffers. This has the benefit of being on-par with the current implementation (based on hardware/OS), however won't incur the double-memory issue.
> [!Important]
> **Developer Note**
> The `BinaryFileWriter` and `BinaryFileReader` has been removed in favor of `MemoryMapFileWriter` and `UnmanagedDataReader`
### Summary
- Generalizes the On/Off toggle items concept
- Updates the OnOffGump so it is static
- Standardizes OnOff items so they can be used by staff
### Notes
Decided to not fix#1417 because it is not clear that the clilocs or errors are for that purpose. Can't test this on OSI anyways.
> [!Warning]
> Users on Linux/OSX will need to follow the Readme
> and make sure `libdeflate` is properly installed
> [!Note]
> **Developer Note**
> The API for compression has changed. Use `Deflate.Standard` for the same functionality.
### Summary
* Replaces Zlib with LibDeflate for a 50% performance improvement!
* Adds MacOS 14 to properly test Arm64
> [!CAUTION]
> **BREAKING CHANGE**
> Removed `OrderdHashSet` and `PooledOrderedHashSet` due to bugs.
> [!NOTE]
> **Developer Note**
> The OrderedSet is not a full data structure. It is not particularly efficient. Pull Requests are welcome for a better implementation, especially if it ends up supporting `ISet<T>` and `IReadOnlySet<T>`
## Summary
The ordered hash set was buggy. It's kind of painful to implement, so for now, I added a simple `OrderedSet` to suffice for gumps. Please reach out if this causes disruption!
### Summary
* Unifies reading UOP File indexes
* Adds ArtData file reader to get graphic bounds
* Automatically generates Bounds.bin from art file if missing
* Adds [GenBounds command to regenerate the bounds.bin file. Useful for when the art file changes.
# New Gump API
We are pleased to release a new API that is faster, allocates nearly zero memory, and still feels very similar to the original API. The API is broken into 3 types of gumps, dynamic, static with placeholders, and static without placeholders.
### Dynamic Gumps
These gumps will inherit `DynamicGump` and are meant for gumps that have a dynamic layout. This includes specifying dynamic arguments to HtmlLocalized entries.
## Static Gumps
Static gumps are those where the function to the build the layout is called only once and cached forever. They can optionally have placeholders. These placeholders allow the developer to specify the string values later, dynamically in a `BuildStrings` method on the gump. If a gump does not have any placeholders, the string entries will also be cached forever.
## Benchmarks
To make sure we were going in the right direction and not wasting time, we took copious benchmarks. Here are the final benchmarks for a really simple gump.
Note:
* The majority of creating a gump is compressing the layout and the strings. Compressing each section takes ~6,000ns (12us total).
```cs
| Method | Mean | Error | StdDev | Median | Ratio | RatioSD | Gen0 | Allocated | Alloc Ratio |
|------------------------------- |-------------:|-------------:|-------------:|-------------:|------:|--------:|-------:|----------:|------------:|
| OldGump | 13,308.29 ns | 1,059.695 ns | 1,883.608 ns | 14,330.72 ns | 1.000 | 0.00 | 0.1526 | 2400 B | 1.00 |
| DynamicLayoutGump | 13,357.86 ns | 129.144 ns | 226.185 ns | 13,323.60 ns | 1.029 | 0.17 | - | 48 B | 0.02 |
| StaticLayoutDynamicStringsGump | 6,653.10 ns | 81.815 ns | 143.292 ns | 6,617.45 ns | 0.514 | 0.09 | - | 40 B | 0.02 |
| StaticLayoutGump | 86.33 ns | 0.760 ns | 1.350 ns | 86.07 ns | 0.007 | 0.00 | 0.0020 | 32 B | 0.01 |
```
# Non-Breaking Changes
* All gump components in the core have been moved to `Gumps/Legacy`.
* All legacy gumps will still inherit `Gump`, which now inherits `BaseGump`
# Special Thanks
Thank you to @stefanomerotta for considerable contributions/benchmarking/testing to make this effort a reality! We collectively went through over 10 iterations, but it is finally ready.
### Summary
* Removes old gump packet support
* Removes support for v4 clients
* Removes `Unpack` flag and assumes it is always true.
* Removes StringToBuffer since this is built into .NET now.
> [!Note]
> View the file changes with white space off: https://github.com/modernuo/ModernUO/pull/1739/files?diff=split&w=1
### Summary
* Fixes spawner timer deserialization
* Adds a check for a null timer and allows the timer to get recreated
* Adds PotionKeg reverse lookup
* Heavily optimizes decimal serialize/deserialize
### Summary
- Fixes `[AdvancedSearch` being accessible by players 😱
- Adds `[GenCommands` to generate the same commands html page on https://muo.gg/commands.
- Fixes `[helpinfo` so all commands properly show up!
> [!WARNING]
> ### Developer Warning:
> Commands must now be registered in the `Configure` bootup phase.
> If a command is not registered early enough, it may not be available to systems like [helpinfo
> that cache their information.
> [!NOTE]
> ### Developer Note:
> Various commands related to generating content have been changed to _Developer_ and above access level.
### Screenshots
<img width="673" alt="image" src="https://github.com/modernuo/ModernUO/assets/3953314/b105b5c9-5eb4-4ace-93ff-1bfb31e7132f">
<img width="547" alt="image" src="https://github.com/modernuo/ModernUO/assets/3953314/e97487e8-47a5-4aa7-89cc-9fe3deda584d">
## Breaking Changes
* The Firewall and IP Limiter have been rewritten. Please read the notes carefully!
* `TcpServer.Instances` moved back to `NetState.Instances` - sorry - it was stupid to move it to begin with.
> [!Note]
> Sockets that fail the IP Limiter or Firewall will be immediately and forcibly disconnected.
> This means they will be stuck at "Verifying account..." if it was a real client.
### Summary
- Removes firewall wildcard support.
- Removes `AccessRestrictions`.
- Moves Firewall/IPLimiter to the core.
- Moves `TcpServer` to its own thread.
- Removes the `SocketConnect` and `SocketDisconnect` event sinks.
- Moves `Instances` back to `NetState.Instances`.
- Fixes a long standing bug with bad handling of duplicate listener addresses.
#### Firewall
The firewall has been completely rewritten. There is now an "Admin Firewall" which saves to the config file. Secondarily, there is an internal firewall used exclusively by the TcpServer while processing sockets. The Admin firewall mirrors it's additions/deletions to the internal firewall by adding requests to a queue.
> [!IMPORTANT]
> **Wildcard firewall entries, such as `X`, `*`, `?` are not allowed.**
> **Ranges in between IP classes or sextets are not allowed.**
> **Please make sure to use one of the following:**
> * IP Address - `192.168.1.1`
> * CIDR - `192.168.1.0/24`
> * Range - `192.168.1.1-192.168.1.100`
#### IP Limiter
The IP Limiter has been completely rewritten. The available configurations are:
```json
"ipLimiter.enable": "True",
"ipLimiter.maxConnectionsPerIP": 10,
"ipLimiter.clearConnectionAttemptsDuration": "00:00:00:10",
"ipLimiter.clearThrottledDuration": "00:00:02:00",
```
The IP Limiter is set up to prevent spamming connections from the same IP. Every time an IP connects, it is added to a connection list. After 10 attempts, the IP is added to the throttle list. To keep the system fast, the connection list is entirely wiped every 10 seconds, and the throttle list is entirely wiped every 2 minutes.
### Summary
- Removes old death packet that isn't used. Doubtful this causes issues with clients that are v4+.
- Removes duplicate incoming packets. Again, probably to fix some old client issues, doubtful it affects clients v4+.
- Fixes setting serials and entities in props/commands. Note: Disabled setting `Parent` since the new sector code has issues. We shouldn't rely on it anyway!
- Reverts a recent change to healthbars that should not have been made. Oops!
